FIX Epson XP 15000 15010 15080 error codes, ASF PID error

Following some last post, this part I’ll display and share the solution about fixing ASF PID errors code: 000060, 000062, 000063, 000064 and 000070,000071,000072,000073.

Fix Epson XP 15000, 15010, 15080: error code 000060

ASF PID driving time error

• Error code: 000060
• Error name: ASF PID driving time error
• Possible cause:  Malfunction or crash of the firmware.
• Solution and how to fix 000060 error?
  • 1. Turn the printer off and back it on.
  • 2. If the error still occurs after the restart, replace the Main Board.

Fix Epson XP 15000, 15010, 15080: error code 000061

ASF PID excess load error

• Connector board: ‘Main Board CN16 CN27’
• Error code: 000061
• Error name:  ASF PID excess load error
• Possible cause:
  •  The ASF Motor stopped running in the middle of the operation.
    1. The ASF was stopped by;
  •  Obstacles such as jammed paper
  •  Overload of the Mechanism
  •  Disengaging or breakage of the gears
  •  Failure of ASF Encoder reading
    2. Disconnection or contamination of the ASF Encoder Scale
    3. Disconnection, break, skew or damage of the ASF Motor Cable/ASF Encoder FFC
    4. Failure of the ASF Encoder Sensor
    5. Failure of the ASF Motor (not completely broken)
    6. Failure of the Main Board
• Solution and how to fix 000061 error?
  • 1. Check that no obstacle exist in the ASF motion range.
  • 2. Check the ASF Drive Wheel Train.
  • 3. Check the ADF Encoder Scale for disconnection or contamination. Clean the Encoder Scale if it is contaminated.
  • 4. Check the cable/FFC of the ASF Motor/ encoder.
  • 5. Replace the ASF Encoder Sensor with a new one.
  • 6. Replace the ASF Motor with a new one.
  • 7. Replace the Main Board with a new one.

Fix Epson XP 15000, 15010, 15080: error code 000062

ASF PID excess speed error

• Connector board: ‘Main Board CN16 CN27’
• Error code: 000062
• Error name: ASF PID driving time error
• Possible cause:
  • Failure of ASF Encoder reading
    1. Contamination of the ASF Encoder Scale
    2. Damage or skew of the ASF Motor Cable/Encoder FFC
    3. Failure of the ASF Encoder Sensor
  • Failure of the ASF Motor Driver
    4. Failure of the Main Board
• Solution and how to fix 000062 error?
  • 1. Clean the ASF Encoder Scale if it is contaminated.
  • 2. Check the cable/FFC of the ASF Motor/encoder.
  • 3. Replace the ASF Encoder Sensor with a new one.
  • 4. Replace the Main Board with a new one.

Fix Epson XP 15000, 15010, 15080: error code 000063, 000064

ASF PID reverse error

• Connector board: ‘Main Board CN16 CN27’
• Error code: 000063
• Error name: ASF PID reverse error
• Possible cause:
  • Paper loading fails, interrupted by obstacles
    1. The ASF was stopped by;
  • Obstacles such as jammed paper
  • Overload of the Mechanism
  • Disengaging or breakage of the gears
  • Failure of ASF Encoder reading
    2. Contamination of the ASF Encoder Scale
    3. Damage or skew of the ASF Motor Cable/Encoder FFC
    4. Failure of the ASF Encoder Sensor
    5. Failure of the Main Board

ASF PID lock error

• Connector board: ‘Main Board CN16 CN27’
• Error code: 000064
• Error name: ASF PID lock error
• Possible cause:
  • The ASF Motor did not run.
    1. The ASF was stopped by;
  • Obstacles such as jammed paper
  • Overload of the Mechanism
  • Disengaging or breakage of the gears
  • Failure of ASF Encoder reading
    2. Contamination of the ASF Encoder Scale
    3. Disconnection, break, skew or damage of the ASF Motor Cable/Encoder FFC
    4. Failure of the ASF Encoder Sensor
    5. Failure of the ASF Motor (the lead wire is broken or the connector is disconnected)
    6. Failure of the Main Board

====

• Solution and how to fix Epson XP 15000, 15010, 15080 ASF PID error code 000063, 000064?
  • 1. Check that no obstacle exist in the ASF motion range.
  • 2. Check the ASF Drive Wheel Train.
  • 3. Clean the ASF Encoder Scale if it is contaminated.
  • 4. Check the cable/FFC of the ASF Motor/encoder.
  • 5. Replace the ASF Encoder Sensor with a new one.
  • 6. Replace the Main Board with a new one.

Fix Epson XP 15000, 15010, 15080: error code 000070

ASF load position driving time error

• Error code: 000070
• Error name:  ASF load position driving time error
• Possible cause:   Malfunction or crash of the firmware
• Solution and how to fix Epson XP 15000, 15010, 15080 ASF PID error code 000070?
  • 1. Turn the printer off and back it on.
  • 2. If the error still occurs after the restart, replace the Main Board.

Fix Epson XP 15000, 15010, 15080: error code 000071

ASF load position excess load error

• Connector board: ‘Main Board CN16 CN27’
• Error code: 000071
• Error name: ASF load position excess load error
• Possible cause:
  • The ASF Motor stopped running in the middle of the operation.
    1. The ASF was stopped by;
  • Obstacles such as jammed paper
  • Overload of the Mechanism
  • Disengaging or breakage of the gears
  • Failure of ASF Encoder reading
    2. Contamination of the ASF Encoder Scale
    3. Failure of the ASF Encoder Sensor
    4. Failure of the ASF Motor (not completely broken)
    5. Failure of the Main Board
• Solution and how to fix Epson XP 15000, 15010, 15080 ASF PID error code 000071?
  • 1. Check that no obstacle exist in the ASF motion range.
  • 2. Check the load of the ASF paper feed Mechanism.
  • 3. Clean the ASF Encoder Scale if it is contaminated.
  • 4. Replace the ASF Encoder Sensor with a new one.
  • 5. Replace the ASF Motor with a new one.
  • 6. Replace the Main Board with a new one

Fix Epson XP 15000, 15010, 15080: error code 000072

ASF load position excess speed error

• Connector board: ‘Main Board CN16 CN27’
• Error code: 000072
• Error name: ASF load position excess speed error
• Possible cause:
  • Failure of ASF Encoder reading
    1. Contamination of the ASF Encoder Scale
    2. Damage or skew of the ASF Motor Cable/Encoder FFC
    3. Failure of the ASF Encoder Sensor
  • Failure of the ASF Motor Driver
    4. Failure of the Main Board
• Solution and how to fix Epson XP 15000, 15010, 15080 ASF PID error code 000072?
  • 1. Clean the ASF Encoder Scale if it is contaminated.
  • 2. Check the cable/FFC of the ASF Motor/encoder.
  • 3. Replace the ASF Encoder Sensor with a new one.
  • 4. Replace the Main Board with a new one

Fix Epson XP 15000, 15010, 15080: error code 000073

ASF load position reverse error

• Connector board: ‘Main Board CN16 CN27’
• Error code: 000073
• Error name: ASF load position reverse error
• Possible cause:
  • Paper loading fails, interrupted by obstacles
    1. The ASF was stopped by;
  • Obstacles such as jammed paper
  • Overload of the Mechanism
  • Disengaging or breakage of the gears
  • Failure of ASF Encoder reading
    2. Contamination of the ASF Motor Encoder Scale
    3. Damage or skew of the ASF Motor Cable/Encoder FFC
    4. Failure of the ASF Motor Encoder
    5. Failure of the Main Board
• Solution and how to fix Epson XP 15000, 15010, 15080 ASF PID error code 000073?
  • 1. Check that no obstacle exist in the ASF motion range.
  • 2. Check the ASF Drive Wheel Train.
  • 3. Clean the ASF Encoder Scale if it is contaminated.
  • 4. Check the cable/FFC of the ASF Motor/encoder.
  • 5. Replace the ASF Encoder Sensor with a new one.
  • 6. Replace the Main Board with a new one.