Secure Epson XP 15000 | XP series after reparing

This section explains specific points of note regarding packaging after repairs are completed.

Firstly, you can look for Epson XP 15000 | XP series Connector Diagram, click here

Secure the Epson XP 15000 Star Wheel Holder Assy

•  Purpose:
  • To prevent deforming the Star Wheel Holder Assy by shock during transportation.
• Risk if it is not performed:
  • Fatal error caused by the deformation of the Star Wheel Holder Assy
• Preparation:
  • Prepare a piece of strong tape (Length: 200 mm, Width: 22 mm, fold one end 5 mm).
  • Paste the strong tape on the styrene foam as shown below to prepare the inner part securing packing material.

• The way to secure Epson XP 15000 Star Wheel Holder Assy:
  1.  Open the Printer Cover.
  2.  In the center of the printer, place the inner part securing packing material into the position as shown below.
  3.  Attach the inner part securing packing material with the strong tape along the shape of the Housing Front Upper/Panel Assy to secure the Star Wheel Holder Assy.

Secure the Epson XP 15000 CDR Tray

• Purpose:
  • Prevent damaging the CDR Tray by vibration during transportation.
• Risk if it is not performed:
  • Damage of the CDR Tray by the vibration during transportation
• Preparation:
  • Prepare two pieces of strong tape (Length: 115 mm, width: 22 mm, fold one end 5 mm).

• The way to secure Epson XP 15000 CDR Tray Assy and the Cassette Assy:
  • Secure the CDR Tray and the Cassette Assy with the strong tape as shown below.

— Epson XP 15000 | XP series disassembly/reassembly, click here

— Epson XP 15000 AdjProg Ver1.0.0 guide, click here

Secure the Epson XP 15000 Cassette Cover and Edge Guide

• Purpose:
  • Prevent damaging the Cassette Cover and Edge Guide by vibration during transportation.
• Risk if it is not performed:
  • Damage of the Cassette Cover and Edge Guide by the vibration during transportation
• Preparation:
  • ## Cassette Cover
    Prepare a piece of strong tape A (Length: 120 mm, Width: 22 mm, fold one end 5 mm) and a styrene foam (front packing material).
  • ## Edge Guide
    Prepare two pieces of strong tape B (Length: 75 mm, Width: 22 mm, fold one end 5 mm) and two styrene foam (rear packing material).

• The way to secure Epson XP 15000 Cassette Cover and Edge Guide:
  • • Cassette Cover
    Attach the front packing material on the cassette cover as shown above and secure it with the strong tape A.
  • • Edge Guide
    Move both edge guides toward the center, place the rear packing material beside each edge guide as shown above, and secure them with the strong tape B.

— About Epson XP 15000 Adjustment Program, click here

Secure the Epson XP 15000 Panel Assy and Cassette Cover

• Purpose:
  • Prevent damaging the Panel Assy and Cassette Cover by vibration during transportation
• Risk if it is not performed:
  • Damage of the Panel Assy and Cassette Cover by the vibration during transportation
• Preparation:
  • Prepare four pieces of strong tape (Length: 60 mm, Width: 22 mm, fold one end 5 mm).

• The way to secure Epson XP 15000 Panel Assy and Cassette Cover:
  • Attach the strong tape to the Panel Assy, Cassette Cover, and Housing Front Left/Right as shown above to secure the Panel Assy and Cassette Cover.

Secure the Epson XP 15000 Printer Cover Upper Assy

• Purpose:
  • Prevent damaging the Printer Cover Upper Assy by vibration during transportation.
• Risk if it is not performed:
  • Damage of the Printer Cover Upper Assy by the vibration during transportation
• Preparation:
  • Prepare two pieces of strong tape (Length: 95 mm, Width: 22 mm, fold one end 5 mm).

• The way to secure Epson XP 15000 Panel Assy and Cassette Cover:
  • Secure the Printer Cover Upper Assy with the strong tape as shown above.

Secure the Epson XP 15000 ASF Cover

• Purpose:
  • Prevent damaging the ASF Cover by vibration during transportation.
• Risk if it is not performed:
  • Damage of the ASF Cover by the vibration during transportation
• Preparation:
  • Prepare a piece of strong tape (Length: 200 mm, Width: 22 mm, fold one end 5 mm).
• Method:
  • Secure the ASF Cover with the strong tape as shown below.