FIX Epson XP 15000 15010 15080 I/S PID error

Continue the series fatal errors of Epson XP 15000, 15010, 15080 products, this part is also the same with the before posts, show the error code 000100, 000101, 000102, 000103, 000104, 000110, 000111, 000112, 000113… by the way with their name, possible cause and finally is the solution to fix error code.

Below picture is the way the printer machine show the message error and the error code to LCD screen and announce to you.

Fix Epson XP 15000, 15010, 15080: error code 000100

I/S PID driving time error

• Error code: 000100
• Error name: I/S PID driving time error
• Possible cause:  Malfunction or crash of the firmware
• Solution and how to fix Epson XP 15000, 15010, 15080 I/S PID error code 000100?
  1.  Turn the printer off and back it on.
  2.  If the error still occurs after the restart, replace the Main Board

Fix Epson XP 15000, 15010, 15080: error code 000101

I/S PID excess load error

• Error code: 000101
• Error name:  I/S PID excess load error
• Possible cause:
  • # The IS Motor stopped running in the middle of the operation.
    1. The Inksystem was stopped by;
  • # Overload of the Mechanism
  • # Disengaging or breakage of the gears
  • # Failure of IS Encoder Sensor reading
    2. Contamination of the IS Encoder Sensor Scale
    3. Failure of the IS Motor (not completely broken)
    4. Failure of the Main Board
• Solution and how to fix Epson XP 15000, 15010, 15080 I/S PID error code 000101?
  1.  Check the load applied to the IS Motor by moving it by hand.
  2.  Check the Wheel Train of the I/S and the APG Drive for disengage or crack.
  3.  Clean the IS Encoder Sensor Scale if it is contaminated.
  4.  Replace the IS Motor with a new one.
  5.  Replace the Main Board with a new one.

Fix Epson XP 15000, 15010, 15080: error code 000102

I/S PID excess speed error

• Connector board: ‘Sub Board CN21, Main Board CN903’
• Error code: 000102
• Error name: I/S PID excess speed error
• Possible cause:
  • #  Failure of IS Encoder Sensor reading
    1. Contamination of the IS Encoder Sensor Scale
    2. Damage or skew of the IS Encoder Sensor FFC
    3. Failure of the IS Encoder Sensor
  • # Failure of the IS Motor Driver
    4. Failure of the Main Board
• Solution and how to fix Epson XP 15000, 15010, 15080 I/S  PID error code 000102?
  1.  Clean the IS Encoder Sensor Scale if it is contaminated.
  2.  Check the IS Encoder Sensor FFC or the connector.
  3.  Replace the IS Encoder Sensor with a new one.
  4.  Replace the Main Board with a new one.

Fix Epson XP 15000, 15010, 15080: error code 000103

I/S PID reverse error

• Connector board: ‘Sub Board CN21, Main Board CN903’
• Error code: 000103
• Error name: I/S PID reverse error
• Possible cause:
  • #  Operation failure of the IS Motor, interrupted by obstacles
    1. The Inksystem was stopped by;
  • # Overload of the Mechanism
  • # Disengaging or breakage of the gears
  • # Failure of IS Encoder Sensor reading
    2. Contamination of the IS Encoder Sensor Scale
    3. Damage or skew of the IS Motor Cable/IS Encoder Sensor FFC
    4. Failure of the IS Encoder Sensor.
    5. Failure of the Main Board.
• Solution and how to fix Epson XP 15000, 15010, 15080 I/S  PID error code 000103?
  1.  Check the load applied to the IS Motor by moving it by hand.
  2.  Check the Wheel Train of the I/S and the Drive for tooth breakage or disengaging.
  3.  Clean the IS Encoder Sensor Scale if it is contaminated.
  4.  Check the cable/FFC of the IS Motor/Encoder.
  5.  Replace the Inksystem with a new one.
  6.  Replace the Main Board with a new one.

Fix Epson XP 15000, 15010, 15080: error code 000104

I/S PID reverse error

• Connector board: ‘Sub Board CN21, Main Board CN903’
• Error code: 000104
• Error name: I/S PID reverse error
• Possible cause:
  • #  Operation failure of the IS Motor, interrupted by obstacles
    1. The Inksystem was stopped by;
  • # Overload of the Mechanism
  • # Disengaging or breakage of the gears
  • # Failure of IS Encoder Sensor reading
    2. Contamination of the IS Encoder Sensor Scale
    3. Damage or skew of the IS Motor Cable/IS Encoder Sensor FFC
    4. Failure of the IS Encoder Sensor.
    5. Failure of the Main Board.
• Solution and how to fix Epson XP 15000, 15010, 15080 I/S  PID error code 000104?
  1.  Check the load applied to the IS Motor by moving it by hand.
  2.  Check the Wheel Train of the I/S and the Drive for tooth breakage or disengaging.
  3.  Clean the IS Encoder Sensor Scale if it is contaminated.
  4.  Check the cable/FFC of the IS Motor/Encoder.
  5.  Replace the Inksystem with a new one.
  6.  Replace the Main Board with a new one.

Fix Epson XP 15000, 15010, 15080: error code 000110

I/S load position driving time error

• Error code: 000110
• Error name: I/S load position driving time error
• Possible cause: Malfunction or crash of the firmware
• Solution and how to fix Epson XP 15000, 15010, 15080 I/S  PID error code 000110?
  1. Turn the printer off and back it on.
  2. If the error still occurs after the restart, replace the Main Board.

Fix Epson XP 15000, 15010, 15080: error code 000111

I/S load position excess load error

• Connector board: ‘Sub Board CN21, Main Board CN903’
• Error code: 000111
• Error name: I/S load position excess load error
• Possible cause:
  • #The IS Motor stopped running in the middle of the operation.
    1. The Inksystem was stopped by;
  • #Overload of the Mechanism
  • #Disengaging or breakage of the gears
  • #Failure of IS Encoder Sensor reading
    2. Contamination of the IS Encoder Sensor Scale
    3. Failure of the IS Motor (not completely broken)
    4. Failure of the Main Board
• Solution and how to fix Epson XP 15000, 15010, 15080 I/S  PID error code 000111?
  1.  Check the load applied to the IS Motor by moving it by hand.
  2.  Check the Wheel Train of the I/S and the APG Drive for disengage or crack.
  3.  Clean the IS Encoder Sensor Scale if it is contaminated.
  4.  Replace the IS Motor with a new one.
  5.  Replace the Main Board with a new one

Fix Epson XP 15000, 15010, 15080: error code 000112

I/S load position excess speed error

• Connector board: ‘Sub Board CN21, Main Board CN903’
• Error code: 000112
• Error name:   I/S load position excess speed error
• Possible cause:
  • #Failure of IS Encoder Sensor reading
    1. Contamination of the IS Encoder Sensor Scale
    2. Damage or skew of the IS Encoder Sensor FFC
    3. Failure of the IS Encoder Sensor
  • #Failure of the IS Motor Driver
    4. Failure of the Main Board/
• Solution and how to fix Epson XP 15000, 15010, 15080 I/S  PID error code 000112?
  1.  Clean the IS Encoder Sensor Scale if it is contaminated.
  2.  Check the IS Encoder Sensor FFC or the connector.
  3.  Replace the IS Encoder Sensor with a new one.
  4.  Replace the Main Board with a new one.

Fix Epson XP 15000, 15010, 15080: error code 000113

I/S load position reverse error

• Connector board: ‘Sub Board CN21, Main Board CN903’
• Error code: 000113
• Error name:  I/S load position reverse error
• Possible cause:
  • #Operation failure of the IS Motor, interrupted by obstacles
    1. The Inksystem was stopped by;
  • #Overload of the Mechanism
  • #Disengaging or breakage of the gears
  • #Failure of IS Encoder Sensor reading
    2. Contamination of the IS Motor Encoder Scale
    3. Damage or skew of the IS Motor Cable/ IS Encoder Sensor FFC
    4. Failure of the IS Encoder Sensor
    5. Failure of the Main Board
• Solution and how to fix Epson XP 15000, 15010, 15080 I/S  PID error code 000113?
  1.  Check the load applied to the IS Motor by moving it by hand.
  2.  Check the Wheel Train of the I/S and the APG Drive for tooth breakage or disengaging.
  3.  Clean the IS Encoder Sensor Scale if it is contaminated.
  4.  Check the cable/FFC of IS Motor/Encoder.
  5.  Replace the IS Encoder Sensor with a new one.
  6.  Replace the Main Board with a new one.