— Lubricate Epson XP 15000 | XP series Rail Guide and Stacker Gear box, click here Lubricate Epson XP 15000 | XP series Frame Base Part supply as ASP: Supplied as the Printer Mechanism Lubrication status when supplied as ASP: Lubricated Application Amount: Appropriate amount Grease Type: G-96 Remarks: Apply with Flux Dispenser. Lubrication Point: […]
Lubricate Epson XP 15000 | XP series Rail Guide, Stacker Gear box
Lubricate Epson XP 15000 | XP series Rail Guide Part supply as ASP: Supplied as the Printer Mechanism Lubrication status when supplied as ASP: Lubricated Application Amount: Appropriate amount Grease Type: G-96 Remarks: Apply with Flux Dispenser. Lubrication Point: ( PNIK COLOR point on the above figure) Contact points on the Rail Guide Right with […]
Lubricate Epson XP 15000 | XP series Frame Base
The type and amount of the grease used to lubricate the printer parts are determined based on the results of the internal evaluations. Therefore, refer to this post for the repairing procedures below, and apply the specified type and amount of the grease to the specified part of the printer mechanism. Lubricate Epson XP 15000 […]
Epson XP 15000 | XP series Maintenance Cleaning the Printhead
This is the first section of Maintenance parts. To see the other posts of Epson XP 15000,15010, 15080 Maintenance, click here – Overview: A newly structured printhead is used in this product. If any ink cartridges aren’t installed, dust or foreign material attaches easily on the printhead compared to a usual one and it may […]
Checking Epson XP-15000 | XP series Platen Gap
This section describes the procedure for checking the platen gap (PG) The standard range of the PG is as follows: • Standard: 1.2 ± 0.1 mm (PG -) This adjustment should be carried out with the mechanism in the minimum PG position (PG -) before installing the CR Scale. PG changes approximately […]
