The type and amount of the grease used to lubricate the printer parts are determined based on the results of the internal evaluations. Therefore, refer to this post for the repairing procedures below, and apply the specified type and amount of the grease to the specified part of the printer mechanism.
Lubricate Epson XP 15000 also provides information about whether or not the parts which require lubrication are supplied as ASP and the lubrication status when supplied as ASP. For the parts which are not supplied as ASP, if their movement is not smooth enough, check their lubrication status and lubricate them if necessary.
— Clean the Epson XP 15000 | XP series Printhead, click here
Grease on using during Lubricating Epson XP 15000, XP series
Grease: G-96 | EPSON Part Code: 1590700
Grease: G-97 | EPSON Part Code: 1635441
Grease: G-72 | EPSON Part Code: 1409258
Lubricate Epson XP 15000 | XP series Frame Base Right
- Part supply as ASP: Supplied as the Printer Mechanism
- Lubrication status when supplied as ASP: Lubricated
- Application Amount: Appropriate amount
- Remarks: Apply with Flux Dispenser.
- Grease Type: G-96
- Lubrication Point: (the point with the PINK COLOR on the figure above)
- Contact points on the Frame Base Right with gears (10 points)
- Grease Type: G-97
- Lubrication Point: (the point with the PINK COLOR on the figure above)
- Contact points on the Frame Base Right with PF Roller Shaft and EJ Roller Shaft (three points)
— Remove Epson XP 15000 | XP series Main Frame, Sensors,… click here
Lubricate Epson XP 15000 | XP series Frame Base Left
- Part supply as ASP: Supplied as the Printer Mechanism
- Lubrication status when supplied as ASP: Lubricated
- Remarks: Apply with Flux Dispenser.
- Application Amount: Appropriate amount
- Grease Type: G-96
- Lubrication Point: (the point with the PINK COLOR on the figure above)
- Contact points on the Frame Base Left with gears (three points)
- Application Amount: Each 0.004g
- Grease Type: G-96
- Lubrication Point: (the point with the PINK COLOR on the figure above)
- Contact points on the Frame Base Left with PF Roller Shaft and EJ Roller Shaft (five points)
