How to fix Epson XP-15000 series Error Codes List

Now, I’m going to share my knowledge about how to fix the Epson XP 15000, XP 15010, XP 15080 all able fatal error code, possible cause and solution of those products.
By the way, the XP 15000, XP 15010, XP 15080 errors codes will go with their error name message, their possible, their connector number port and finally is their confirmation step solution to solve them. Let’s go now!

First of all, you need to know how the product announce you about the error message?

That , the fatal error code is stored in the EEPROM on the Main Board and can be read out using the Adjustment Program. When a fatal error occurs, this product displays the fatal error code automatically on the panel LCD.

Fix Epson XP 15000, 15010, 15080 errors about the Printer (CR)

Epson XP 15000, 15010, 15080: error code 000020

CR PID driving time error

• Error code: 000020
• Error name: CR PID driving time error
• Possible cause: Malfunction or crash of the firmware.
• Solution and how to fix 000020 error?
  1. Turn the printer off and back it on.
  2. If the error still occurs after the restart, replace the Main Board.

Epson XP 15000, 15010, 15080: error code 000021

CR PID excess load error

• Connector board: Main Board CN30 CN901
• Error code: 000021
• Error name: CR PID excess load error
• Possible cause:
  • The CR Motor stopped running in the middle of the operation.
    • 1. The CR was stopped by;
      • Obstacles such as jammed paper
      • Overload of the Mechanism
      • Interfere with the Inksystem
      • Disengaging, fraying, jumping of the Timing Belt
      • Disengaging or breakage of the gears.
      • APG Sensor failure, Sensor FFC disconnected
  • Failure of CR Encoder reading
    • 2. Contamination of the CR Encoder Scale
    • 3. Failure of the CR Motor (not completely broken)
    • 4. Failure of the Main Board

• Solution and how to fix 000021 error?
  1. Check that no obstacle exist in the CR motion range.
  2. Check the CR Lock and Inksystem for any abnormality.
  3. Check the Timing Belt for fraying or looseness.
  4. Check the load applied to the CR by moving it by hand.
  5. Check if the lubricant on the CR shaft is adequate.
  6. Check the CR Drive Mechanism.
  7. Clean the CR Encoder Scale if it is contaminated.
  8. Replace the CR Motor with a new one.
  9. Replace the Main Board with a new one.

Epson XP 15000, 15010, 15080: error code 000022

CR PID excess speed error

• Connector board: Main Board CN30 CN901
• Error code: 000022
• Error name: CR PID excess speed error
• Possible cause:
  • Failure of CR Encoder reading
    • Contamination of the CR Encoder Scale
    • Damage or skew of the CR Encoder FFC
    • Failure of the CR Encoder Sensor
  • Failure of the CR Motor Driver
  • Failure of the Main Board
• Solution and how to fix 000020 error?
  1. Clean the CR Encoder Scale if it is contaminated.
  2. Check the FFC of the CR Encoder.
  3. Replace the CR Encoder Sensor with a new one.
  4. Replace the Main Board with a new one.

Epson XP 15000, 15010, 15080: error code 000023

CR PID reverse error

• Connector board: Main Board CN30 CN901
• Error code: 000023
• Error name: CR PID reverse error
• Possible cause:
  • Operation failure of the CR Motor, interrupted by obstacles
    1. 1. CR was stopped by;
        Obstacles such as jammed paper
        Interfere with the Inksystem
        Disengaging or breakage of the gears
        Failure of CR Encoder reading
    2. Jumping of the CR Timing Belt
    3. Contamination of the CR Encoder Scale
    4. Damage or skew of the CR Encoder FFC
    5. Failure of the CR Encoder Sensor
    6. Failure of the Main Board
• Solution and how to fix 000023 error?
  1. Check that no obstacle exist in the CR motion range.
  2. Check the CR Lock and Inksystem for any abnormality.
  3. Check the Timing Belt for fraying or looseness.
  4. Clean the CR Encoder Scale if it is contaminated.
  5. Check the CR Encoder FFC or the connector.
  6. Replace the CR Encoder Sensor with a new one.
  7. Replace the Main Board with a new one.

Epson XP 15000, 15010, 15080: error code 000024

CR PID lock error

• Connector board: Main Board CN30 CN901
• Error code: 000024
• Error name: CR PID lock error
• Possible cause:
  • The CR Motor did not run, or the CR could not move smoothly.
    1. Overload of the CR
  • Failure of CR Encoder reading
    2. The Timing Belt become frayed or jumping
    3. Contamination of the CR Encoder Scale
    4. Disconnection, break, skew or damage of the CR Encoder FFC
    5. Failure of the CR Encoder Sensor
    6. Failure of the CR Motor (the lead wire is broken or the connector is disconnected)
    7. Failure of the Main Board
• Solution and how to fix 000024 error?
  1.  Check that no obstacle exist in the CR motion range.
  2.  Move the CR by hand to see if it moves smoothly without getting stuck.
  3.  Check the Timing Belt for fraying or looseness.
  4.  Clean the CR Encoder Scale if it is contaminated.
  5.  Check the connector and the CR Encoder FFC for damage.
  6.  Replace the CR Encoder FFC with a new one.
  7.  Check the connector of the CR Motor.
  8.  Replace the CR Motor with a new one.
  9.  Replace the Main Board with a new one

Epson XP 15000, 15010, 15080: error code 000025

CR PID speed fall error

• Connector board: Main Board CN30 CN901
• Error code: 000025
• Error name: CR PID speed fall error
• Possible cause:
  • Operation failure of the CR.
    1. The CR was stopped by;
  • Obstacles such as jammed paper
  • Overload of the Mechanism
  • Interfere with the Inksystem.
  • Failure of CR Encoder reading
    2. The Timing Belt become loosened or jumping
    3. Contamination of the CR Encoder Scale
    4. Damage or skew of the CR Encoder FFC
    5. Failure of the CR Motor
    6. Failure of the Main Board
• Solution and how to fix 000025 error?
  1. Check that no obstacle exist in the CR motion range.
  2. Check the CR Lock and Inksystem for any abnormality.
  3. Check the Timing Belt for looseness.
  4. Clean the CR Encoder Scale if it is contaminated.
  5. Check the connector of the CR Encoder FFC.
  6. Replace the CR Motor with a new one.
  7. Replace the Main Board with a new one.

Epson XP 15000, 15010, 15080: error code 000030

CR load position driving time error

• Connector board: Main Board CN30 CN901
• Error code: 000030
• Error name: CR load position driving time error
• Possible cause: Malfunction or crash of the firmware
• Solution and how to fix 000030 error?
  1.  Turn the printer off and back it on.
  2.  If the error still occurs after the restart, replace the Main Board.

Epson XP 15000, 15010, 15080: error code 000031

CR load position excess load error

• Connector board: Main Board CN30 CN901
• Error code: 000031
• Error name: CR load position excess load error
• Possible cause:
  • The CR Motor stopped running in the middle of the operation.
    1. The CR was stopped by;
  • Obstacles such as jammed paper
  • Overload of the Mechanism
  • Interfere with the Inksystem
  • Disengaging or breakage of the gears
  • Disengaging, fraying, jumping of the Timing Belt
  • Failure of CR Encoder reading
    2. Contamination of the CR Encoder Scale
    3. Failure of the CR Motor (not completely broken)
    4. Failure of the Main Board
• Solution and how to fix 000031 error?
  1. Check that no obstacle exist in the CR motion range.
  2. Check the CR Lock and Inksystem for any abnormality.
  3. Check the Timing Belt for fraying or looseness.
  4. Check the load applied to the CR by moving it by hand.
  5. Check if the lubricant on the CR shaft is adequate.
  6. Check the CR Drive Mechanism.
  7. Clean the CR Encoder Scale if it is contaminated.
  8. Replace the CR Motor with a new one.
  9. Replace the Main Board with a new one

Epson XP 15000, 15010, 15080: error code 000032

CR load position excess speed error

• Connector board: Main Board CN30 CN901
• Error code: 000032
• Error name: CR load position excess speed error
• Possible cause:
  • Failure of CR Encoder reading
    1. Contamination of the CR Encoder Scale
    2. Damage or skew of the CR Encoder FFC
    3. Failure of the CR Encoder Sensor
  • Failure of the CR Motor Driver
    4. Failure of the Main Board
• Solution and how to fix 000032 error?
  1.  Clean the CR Encoder Scale if it is contaminated.
  2.  Check the FFC of the CR Encoder.
  3.  Replace the CR Encoder Sensor with a new one.
  4.  Replace the Main Board with a new one.

Epson XP 15000, 15010, 15080: error code 000033

CR load position reverse error

• Connector board: Main Board CN30 CN901
• Error code: 000033
• Error name: CR load position reverse error
• Possible cause:
  •  Operation failure of the CR Motor, interrupted by obstacles
    1. CR was stopped by;
  •  Obstacles such as jammed paper
  •  Overload of the Mechanism
  •  Interfere with the Inksystem
  •  Failure of CR Encoder reading
    2. Jumping of the CR Timing Belt
    3. Contamination of the CR Encoder Scale
    4. Damage or skew of the CR Encoder FFC
    5. Failure of the CR Encoder Sensor
    6. Failure of the Main Board
• Solution and how to fix 000033 error?
  1.  Check that no obstacle exist in the CR motion range.
  2.  Check the CR Lock and Inksystem for any abnormality.
  3.  Check the Timing Belt for fraying or looseness.
  4.  Clean the CR Encoder Scale if it is contaminated.
  5.  Check the CR Encoder FFC or the connector.
  6.  Replace the CR Encoder Sensor with a new one.
  7.  Replace the Main Board with a new one

Fix Epson XP 15000, 15010, 15080 errors about Printer (PW/PE Sensor)

Epson XP 15000, 15010, 15080: error code 030001

PE detector error

• Connector board: Sub Board CN10
• Error code: 030001
• Error name: PE detector error
• Possible cause:
  • PE Sensor damage
  • Failure of the Main Board
    • Occurs when the light value became lower than the threshold value in light value adjustment.
• Solution and how to fix 030001 error?
  1. Check the PE Sensor for broken cable or unconnected connector.
  2. Replace the PE Sensor with a new one.
  3. Replace the Main Board with a new one

Epson XP 15000, 15010, 15080: error code 030002

PW sensor light value adjust error

• Connector board: Sub Board CN30
• Error code: 030002
• Error name: PW sensor light value adjust error
• Possible cause:
  •  PW Sensor damage
  •  Failure of the Main Board
    •  Cannot detect paper even the light value was raised to maximum in light value adjustment.
• Solution and how to fix 030002 error?
  1.  Check the PW Sensor for broken cable or unconnected connector.
  2.  Replace the PW Sensor with a new one.
  3.  Replace the Main Board with a new one.

Epson XP 15000, 15010, 15080: error code 030003

PE sensor light value adjust error

• Connector board: Sub Board CN10
• Error code: 030003
• Error name: PE sensor light value adjust error
• Possible cause:
  •  PW Sensor damage
  •  Failure of the Main Board
    •  Cannot detect paper even the light value was raised to maximum in light value adjustment.
• Solution and how to fix 030003 error?
  1.  Check the PE Sensor for broken cable or unconnected connector.
  2.  Replace the PE Sensor with a new one.
  3.  Replace the Main Board with a new one.