Look at the disassbly/reassembly guide of Epson XP-15000,15010,15080. Click here
How to route ASF Motor/IS Motor?
STEP 1: Route the ASF Motor Cable through the slit on the Holder, and set the ferrite core into the space shown above.
STEP 2: Set the ferrite core of the IS Motor Cable into the space shown above on the Holder.
STEP 3:Route the cables through the two hooks on the Holder, and route them through the groove on the Frame Base. And then secure them with acetate tape.
STEP 4:Route the cables through the five hooks on the Main Frame. (Align the portions protected with acetate tape with the hooks of the Main Frame.)
STEP 5:Pull the cables out from the holes on the Frame Base, and secure them though the hook.
How to route PE Sensor FFC (Main Frame bottom)?
Route the PE Sensor FFC on the bottom of the Main Frame as shown above
How to route Paper Guide Front Assy?
Route the Paper Guide Front Assy or Route Stacker Open Sensor Cable through the eight slits, and pull it out from the hole on the Frame Base
How to route Waste Ink Connector Holder?
Route the Waste Ink Connector FFC along the shape of the ribs on the Waste Ink Connector Holder.
— See the details guide to remove or replace the Epson XP-15000. Click here
How to route High Voltage Module Grounding Cable?
- Route the Grounding Cable through the three slits on the Rail Guide Left Assy.
- When tightening the screw, set the Grounding Cable inside the rib on the Paper Guide Front Assy
— See the guide for removing High Voltage Module. Click here
By the way, this post is the final post of disassembly Epson Xp-15000 series and the final of the section Routing Cables/FFCs on the products.
If you have trouble with others parts, come to find the error or just contact me to get the supports.