Brother MFC8220 fix error codes list

Brother MFC8220 fix error codes list

– Compatible Printer model: Brother MFC8220
– Brother MFC8220 Error Codes with instructions guide:

• Code: 56
• Description: Front cover opened.
• Causes:

• Code: 5A
• Description: Out of paper.
• Causes:

• Code: 6A
• Description: Heater warming-up timeout error. (Heater does not reach 60°C within 11 sec.)
• Causes: • Thermistor ASSY • Halogen lamp

• Code: 6B
• Description: Heater warming-up timeout error. (Heater does not reach 100°C within 15 sec.)
• Causes: • Thermistor ASSY • Halogen lamp

• Code: 6C
• Description: Heater temperature exceeds the maximum high temperature. (270°C or more is detected for 1 sec.)
• Causes: • Thermistor ASSY • Power supply PCB

• Code: 6D
• Description: Heater temperature lowers the minimum low temperature. (60°C or less is detected for 1 sec.)
• Causes: • Thermistor ASSY • Power supply PCB

• Code: 6E
• Description: Heater temperature does not go up enough. (Slower temperature rise rate than 2°C/5 sec. is detected.)
• Causes: • Halogen lamp • Power supply PCB

• Code: 6F
• Description: Heater hard limiter operates.
• Causes: • Thermistor ASSY • Power supply PCB

• Code: 71
• Description: Scanner motor does not synchronize with the reference clock.
• Causes: • Scanner motor

• Code: 72
• Description: Cannot detect Beam Detect signal.
• Causes: • Scanner motor

• Code: 73
• Description: Drum unit is not mounted.
• Causes: • Toner sensor • Drum unit

• Code: 74
• Description: Toner empty.
• Causes: • Toner sensor • Toner cartridge

• Code: 75
• Description: In-casing temperature error.
• Causes: • Thermistor ASSY

• Code: 76
• Description: Heater harness disconnected or broken.
• Causes: • Thermistor ASSY • Halogen lamp

• Code: 77
• Description: Power was turned off when error 76 or error 78 occurred.
• Causes:

• Code: 78
• Description: Heater thermistor harness disconnected or broken.
• Causes: • Thermistor ASSY

• Code: 79
• Description: In-casing temperature sensor harness disconnected or broken.
• Causes: • Thermistor ASSY • Main PCB • Engine PCB • Main motor

• Code: 7A
• Description: Main motor does not synchronize with the reference clock.
• Causes:

• Code: 7B
• Description: ASIC error on the main PCB.
• Causes:

• Code: 7C
• Description: Engine PCB error.
• Causes:

• Code: 80
• Description: Paper size setting error.
• Causes: • Paper width sensor • Paper size

• Code: 81
• Description: Paper width sensor remains ON.
• Causes: • Paper width sensor

• Code: 82
• Description: Paper feeding error.
• Causes: • Paper pick-up roller

• Code: 83
• Description: Paper jam. Regist sensor, second regist sensor, or manual feed sensor remaining ON.
• Causes: • Regist sensor • Main PCB

• Code: 84
• Description: Paper jam. Paper eject sensor remaining ON.
• Causes: • Regist sensor actuator • If the paper width sensor is defective, replace the needle tube & head flat cable ASSY. • Main PCB

• Code: 85
• Description: No paper tray loaded.
• Causes: • Paper tray

• Code: 86
• Description: No 2nd paper tray loaded.
• Causes: • Paper tray

• Code: 87
• Description: Main motor stop position error.
• Causes: • Main motor

• Code: 88
• Description: Paper jam. Paper eject sensor remaining OFF even after regist sensor is turned OFF.
• Causes: • Regist sensor actuator • If the paper width sensor is defective, replace the needle tube & head flat cable ASSY. • Main PCB

• Code: A1
• Description: Main cover opened.
• Causes: • Main PCB • Scanner unit

• Code: A2
• Description: Document too long to scan.
• Causes: • Document front sensor • Document rear sensor • Document sensor PCB • Document feed roller • ADF motor • Main PCB

• Code: A3
• Description: Document not detected by the document rear sensor.
• Causes:

• Code: A4
• Description: Not used. (50% or more of white level data is improper.)
• Causes:

• Code: A5
• Description: FAX transmission scan failure detected. First attempt.
• Causes: • CIS • Main PCB

• Code: A6
• Description: FAX transmission scan failure detected. Second attempt.
• Causes: • CIS • Main PCB

• Code: AA
• Description: The document cover is not closed.
• Causes:

• Code: AC
• Description: Less than 50% of white level date is incorrect.
• Causes:

• Code: AE
• Description: CIS home position sensor remains OFF. In other words, the CIS unit does not return to the home position.
• Causes: • CIS • Driver PCB • Main PCB

• Code: AF
• Description: CIS home position sensor remains ON. In other words, the CIS unit remains in the home position.
• Causes:

• Code: B0
• Description: Scanner motor harness half inserted.
• Causes: • Scanner motor harness

• Code: B1
• Description: Dark level offset data level error for scanning.
• Causes: • CIS • Main PCB

• Code: B2
• Description: Gain control data level error for scanning.
• Causes:

• Code: B3
• Description: Scan area left edge detection error.
• Causes: • CIS • Main PCB • Black markings on the white-level reference film inside the scanner top cover

• Code: B4
• Description: Scan area right edge detection error.
• Causes:

• Code: B7
• Description: A/D converter standard voltage failure; at High side.
• Causes:

• Code: B8
• Description: A/D converter standard voltage failure; at Low side.
• Causes:

• Code: B9
• Description: Scanning light source failure.
• Causes: • CIS • Main PCB

• Code: BB
• Description: Scanning white level failure.
• Causes: • CIS • Main PCB • White tape

Solved Brother MFC8220 Error codes

• Code: BD
• Description: Black level data error.
• Causes: • CIS • Main PCB

• Code: Dx
• Description: Modem error.
• Causes: • Main PCB

• Code: E4
• Description: Out of paper.
• Causes: • Regist sensor • Main PCB

• Code: E6
• Description: Write error in EEPROM.
• Causes: • Driver PCB

• Code: E8
• Description: Data scanning error during transmission.
• Causes: • CIS • Main PCB

• Code: EA
• Description: Document removed at phase B.
• Causes:

• Code: F5
• Description: EOL not found during page memory transfer.
• Causes: • Replace the main PCB if this error occurs frequently.

• Code: F6
• Description: PC interface error.
• Causes: • Interface cable • Main PCB

• Code: FA
• Description: Scanner motor error detected.
• Causes: • Scanner motor

• Code: FF
• Description: Memory management error
• Causes: • Replace the main PCB if this error occurs frequently.

– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here

About Canon Servie Tool V5610

– Canon Service Tool V5610 is a tool used to perform maintenance on Canon printers and reset Canon printers after replacement of parts such as replacing ink absorbents, print heads, printer mainboard, and others. Based on the many cases we have encountered, the Service Tool is most often used to reset ink absorber counter value when the waste ink absorber is full.
– The ink absorber is going to be full of box, it has to be replaced or cleaned the waste ink absorber. Also, replaceing or cleaning the waste ink absorber, you need to repair or reset the waste ink counter value, cause those parts are concerned to each others.
– So using Canon Service Tool V5610 to reset the waste ink counter value becomes effective when the ink absorber is replaced or cleaned.

– Canon Service Tool V5610 can use to fix error code 5B00, 5B02, 5B04, 5B14, 1701, 1702, 1700 on your printer. You must enter Service Mode on your printer to use this Canon Service Tool.
– If the printer can not enter Service Mode, you can not reset it by Canon ST V5610. In this case, change EEPROM on the logic board.

Canon Service Tool V5610 Functions

– Fix Canon printer 7 times/ 8 times red light blinking:

– Fix Canon printer error code: 5B00, 5B01, 1700, 1701

Enter Service Mode on Canon Printer

1. Turn off a printer
2. Press and hold the Resume/Cancel/Stop button
3. Press and hold the ON button (do not release both buttons)
4. Release the Resume/Cancel/Stop button (do not release the ON button)
5. While holding the ON button, press the Resume/Cancel/Stop button 5 times, then release both the ON and Resume/Cancel/Stop buttons together.
– Canon printer in service mode: computer detects new hardware, led on printer goes green light.
For more information about Canon Serice Tool V5610

– Get more information about Epson XP 15000 troubleshooting, click here
– Buy cheap key of Epson WIC Reset Tool, CLICK HERE
– Key Epson Adjustment Program, CLICK HERE
https://dnasofts.com/download-epson-xp-6100-driver-firmware-and-manuals/

Contact us to get support with Brother MFC8220 Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.

Source:
https://dnasofts.com
https://shop.nguyendangnam.com/