Brother MFC7150C fix error codes list
– Compatible Printer model: Brother MFC7150C
– Brother MFC7150C Error Codes with instructions guide:
- Code: 23
- Description: Printer engine timeout.
- Code: 25
- Description: Ink cartridges had already been loaded when the power was first applied.
- Code: 31
- Description: The carriage cannot travel to the right or left.
- Code: 32
- Description: After driven by the specified number of pulses, the carriage does not stop (since it cannot detect the left end of the travel).
- Code: 33
- Description: The carriage movement parameter exceeded the travel range during printing.
- Code: 34
- Description: When initialized, the carriage could not detect the right or left end of the travel range.
- Code: 35
- Description: The carriage cannot move in midway of travel.
- Code: 38
- Description: The carriage stop position is out of the travel range.
- Code: 39
- Description: Printing area error.
- Code: 3A
- Description: Sudden carriage stop during printing acceleration.
- Code: 3D
- Description: The carriage has overridden the travel range.
- Code: 41
- Description: The head drive voltage has not been turned from Low to High within the specified time.
- Code: 42
- Description: The head drive voltage has not been turned from High to Low within the specified time.
- Code: 43
- Description: The head drive voltage sticks to Low.
- Code: 44
- Description: Head thermister broken.
- Code: 45
- Description: Head thermister short-circuited.
- Code: 46
- Description: The number of performed purge sequences has reached the limit.
- Code: 4B
- Description: Abnormal carriage travel speed detected when the power was applied.
- Code: 4C
- Description: Head rated voltage data stored in the EEPROM on the head PCB is invalid. (This code may appear only in the maintenance mode.)
- Code: 50
- Description: The purge cam HP switch does not come ON even after the purge cam has been driven by the specified number of
pulses.
- Code: 51
- Description: The purge cam HP switch does not go OFF even after the purge cam has been driven by the specified number of
pulses.
- Code: 52
- Description: At the time of purge operation, the carriage has not stopped in the purge position.
- Code: 53
- Description: The purge cam HP switch has come ON when the carriage was in the wipe position.
- Code: 54
- Description: When reset, the purge cam HP switch does not come ON even after the purge cam has been driven by the specified
number of pulses.
- Code: 55
- Description: When reset, the purge cam HP switch does not go OFF even after the purge cam has been driven by the specified
number of pulses.
- Code: 82
- Description: Recording paper feeding error.
- Code: 83
- Description: Recording paper jam. (The registration sensor sticks to OFF, indicating that paper has jammed.)
- Code: 84
- Description: Recording paper jam. (The paper ejection sensor has detected a paper jam.)
- Code: 88
- Description: Recording paper jam. (Even after the registration sensor has come ON, the paper ejection sensor does not detect paper.)
- Code: A1
- Description: Top cover opened.
- Code: A2
- Description: Document too long to scan.
- Code: A3
- Description: Document not detected by the document rear sensor.
- Code: A4
- Description: 50% or more faulty of white level data.
- Code: A7
- Description: One-line feeding timeout.
- Code: A8
- Description: One-line scanning timeout.
- Code: AC
- Description: Less than 50% faulty of white level data.
- Code: B8
- Description: A/D voltage regulation error.
- Code: B9
- Description: Light emission intensity error of the LED array.
- Code: D5
- Description: The MODEM has failed to complete the command transmission sequence.
- Code: E4
- Description: Out of recording paper.
- Code: E6
- Description: Write error in EEPROM
- Code: E8
- Description: Data scanning error during transmission.
- Code: EA
- Description: Document removed at phase B
- Code: F3
- Description: Voice message recording or playing-back not started.
- Code: F6
- Description: PC interface error
Solved Brother MFC7150C Error codes
– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here
About Canon Servie Tool V5610
– Canon Service Tool V5610 is a tool used to perform maintenance on Canon printers and reset Canon printers after replacement of parts such as replacing ink absorbents, print heads, printer mainboard, and others. Based on the many cases we have encountered, the Service Tool is most often used to reset ink absorber counter value when the waste ink absorber is full.
– The ink absorber is going to be full of box, it has to be replaced or cleaned the waste ink absorber. Also, replaceing or cleaning the waste ink absorber, you need to repair or reset the waste ink counter value, cause those parts are concerned to each others.
– So using Canon Service Tool V5610 to reset the waste ink counter value becomes effective when the ink absorber is replaced or cleaned.
– Canon Service Tool V5610 can use to fix error code 5B00, 5B02, 5B04, 5B14, 1701, 1702, 1700 on your printer. You must enter Service Mode on your printer to use this Canon Service Tool.
– If the printer can not enter Service Mode, you can not reset it by Canon ST V5610. In this case, change EEPROM on the logic board.
Canon Service Tool V5610 Functions
– Fix Canon printer 7 times/ 8 times red light blinking:
– Fix Canon printer error code: 5B00, 5B01, 1700, 1701
Enter Service Mode on Canon Printer
1. Turn off a printer
2. Press and hold the Resume/Cancel/Stop button
3. Press and hold the ON button (do not release both buttons)
4. Release the Resume/Cancel/Stop button (do not release the ON button)
5. While holding the ON button, press the Resume/Cancel/Stop button 5 times, then release both the ON and Resume/Cancel/Stop buttons together.
– Canon printer in service mode: computer detects new hardware, led on printer goes green light.
For more information about Canon Serice Tool V5610
– Get more information about Epson XP 15000 troubleshooting, click here
– Buy cheap key of Epson WIC Reset Tool, CLICK HERE
– Key Epson Adjustment Program, CLICK HERE
https://dnasofts.com/download-epson-xp-6100-driver-firmware-and-manuals/
Contact us to get support with Brother MFC7150C Error case
Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.
Source:
https://dnasofts.com
https://shop.nguyendangnam.com/
