Brother HL1660e fix error codes list
– Compatible Printer model: Brother HL1660e
– Brother HL1660e Error Codes with instructions guide:
- Code: 50
- Display: 50 FUSER MALF
- Description: Malfunction of fuser
- Code: 51
- Display: 51 LASER BD MALF
- Description: Malfunction of laser beam detector
- Code: 52
- Display: 52 SCANNER MALF
- Description: Malfunction of laser unit motor
- Code: 53
- Display: 53 DX FAN MALF
- Description: Malfunction of fan motor in the duplex unit.
- Code: 54
- Display: 54 MOTOR MALF
- Description: Malfunction of main motor
- Code: 55
- Display: 55 HIGH VOL MALF
- Description: Malfunction of high-voltage power supply Malfunction of Transfer roller ASSY
- Code: 60
- Display: 60 SYSTEM ERROR
- Description: Error in XXXXX
- Code: 61
- Display: 61 PROG ERROR
- Description: Program ROM checksum error
- Code: 63
- Display: 63 D-RAM ERROR
- Description: D-RAM error
- Code: 66
- Display: 66 NV-W ERROR
- Description: NV-RAM error
- Code: 67
- Display: 67 NV-R ERROR
- Description: NV-RAM error
- Code: 68
- Display: 68 NV-B ERROR
- Description: NV-RAM error
- Code: 99-2
- Display: 99 SERVICE 2
- Description: Instruction access error
- Code: 99-3
- Display: 99 SERVICE 3
- Description: Memory address not aligned
- Code: 99-4
- Display: 99 SERVICE 4
- Description: Instruction bus error
- Code: 99-5
- Display: 99 SERVICE 5
- Description: Data bus error
- Code: 99-6
- Display: 99 SERVICE 6
- Description: Privileged instruction
- Code: 99-8
- Display: 99 SERVICE 8
- Description: Illegal instruction
- Code: 99-9
- Display: 99 SERVICE 9
- Description: No fpu
Solved Brother HL1660e Error codes
– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here
About Canon Servie Tool V5610
– Canon Service Tool V5610 is a tool used to perform maintenance on Canon printers and reset Canon printers after replacement of parts such as replacing ink absorbents, print heads, printer mainboard, and others. Based on the many cases we have encountered, the Service Tool is most often used to reset ink absorber counter value when the waste ink absorber is full.
– The ink absorber is going to be full of box, it has to be replaced or cleaned the waste ink absorber. Also, replaceing or cleaning the waste ink absorber, you need to repair or reset the waste ink counter value, cause those parts are concerned to each others.
– So using Canon Service Tool V5610 to reset the waste ink counter value becomes effective when the ink absorber is replaced or cleaned.
– Canon Service Tool V5610 can use to fix error code 5B00, 5B02, 5B04, 5B14, 1701, 1702, 1700 on your printer. You must enter Service Mode on your printer to use this Canon Service Tool.
– If the printer can not enter Service Mode, you can not reset it by Canon ST V5610. In this case, change EEPROM on the logic board.
Canon Service Tool V5610 Functions
– Fix Canon printer 7 times/ 8 times red light blinking:
– Fix Canon printer error code: 5B00, 5B01, 1700, 1701
Enter Service Mode on Canon Printer
1. Turn off a printer
2. Press and hold the Resume/Cancel/Stop button
3. Press and hold the ON button (do not release both buttons)
4. Release the Resume/Cancel/Stop button (do not release the ON button)
5. While holding the ON button, press the Resume/Cancel/Stop button 5 times, then release both the ON and Resume/Cancel/Stop buttons together.
– Canon printer in service mode: computer detects new hardware, led on printer goes green light.
For more information about Canon Serice Tool V5610
– Get more information about Epson XP 15000 troubleshooting, click here
– Buy cheap key of Epson WIC Reset Tool, CLICK HERE
– Key Epson Adjustment Program, CLICK HERE
https://dnasofts.com/download-epson-xp-6100-driver-firmware-and-manuals/
Contact us to get support with Brother HL1660e Error case
Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.
Source:
https://dnasofts.com
https://shop.nguyendangnam.com/