Samsung SCX6122FN model and fix error codes list

Samsung SCX6122FN model and fix error codes list

– Compatible Printer model: Samsung SCX6122FN
– Samsung SCX6122FN Error Codes with quick guides:

• Code: 01
• Display: Authentication Failure
• Description: The ID or password you entered is incorrect.
• Troubleshooting Guides: Enter the correct ID or password.

• Code: 02
• Display: [COMM. Error]
• Description: The machine has a communication problem.
• Troubleshooting Guides: Ask the sender to try again.

• Code: 03
• Display: Connection Error
• Description: Connection with the SMTP server failed.
• Troubleshooting Guides: Check the server settings and the network cable

• Code: 04
• Display: Connection Failed
• Description: The protocol you have entered is not supported or server port is wrong.
• Troubleshooting Guides: Check the protocol or server port.

• Code: 05
• Display: [Document Jam]
• Description: The loaded original has jammed in the ADF
• Troubleshooting Guides: Clear the jam.

• Code: 06
• Display: Door Open
• Description: The front cover or rear cover is not securely latched.
• Troubleshooting Guides: Close the cover until it locks into place.

• Code: 07
• Display: Drum Warning
• Description: The drum cartridge is near the end of its life.
• Troubleshooting Guides: You should ensure a replacement cartridge in stock.

• Code: 08
• Display: Enter Again
• Description: You entered an unavailable item.
• Troubleshooting Guides: Enter the correct item again.

• Code: 09
• Display: Duplex Jam Open/Close Door
• Description: Paper has jammed during duplex printing.
• Troubleshooting Guides: Clear the jam.

• Code: 10
• Display: File Access Denied
• Description: Login to the network server was successful. However, access to the file on the network server was denied.
• Troubleshooting Guides: Change the server settings.

• Code: 11
• Display: File Name Exist
• Description: The file name you have entered already exists
• Troubleshooting Guides: Enter a different file name.

• Code: 12
• Display: File Name Over Limit
• Description: The file names you can use are from doc001 to doc999. However, all file names are used already.
• Troubleshooting Guides: Delete unnecessary files.

Solve Samsung SCX6122FN Error codes

• Code: 13
• Display: Fuser Door Open
• Description: The fuser door is not securely latched.
• Troubleshooting Guides: Open the rear cover and close the fuser door until it locks into place. For the location of the fuser door.

• Code: 14
• Display: Group Not Available
• Description: You have tried to select a group location number where only a single location number can be used, such as when adding locations for a Multiple Send operation.
• Troubleshooting Guides: Use a speed dial number or dial a number manually using the number keypad.

• Code: 15
• Display: [Incompatible]
• Description: The machine has received a fax from which is registered as a junk fax.
• Troubleshooting Guides: The received fax data will be deleted. Reconfirm junk fax setup.

• Code: 16
• Display: Invalid Server Address
• Description: The server address you have entered is invalid.
• Troubleshooting Guides: Enter the correct server address.

• Code: 17
• Display: Line Busy
• Description: The receiving fax machine did not answer or the line is already engaged.
• Troubleshooting Guides: Try again after a few minutes.

• Code: 18
• Display: [Line Error]
• Description: Your machine cannot connect with the receiving fax machine or has lost contact because of a problem with the phone line.
• Troubleshooting Guides: Try again. If the problem persists, wait an hour or so for the line to clear and try again. Or, turn the ECM mode on.

• Code: 19
• Display: Low Heat Error Cycle Power
• Description: There is a problem in the fuser uni t.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, Replace to the Fuser Unit

• Code: 20
• Display: LSU Motor Error Cycle Power
• Description: A problem has occurred in the LSU (Laser Scanning Unit).
• Troubleshooting Guides: Unplug the power cord and plug it back inches. If the problem persists, Replace to the Fuser Unit

• Code: 21
• Display: LSU Hsync Error Cycle Power
• Description: A problem has occurred in the LSU (Laser Scanning Unit).
• Troubleshooting Guides: Unplug the power cord and plug it back inches. If the problem persists, Replace to the Fuser Unit

• Code: 22
• Display: Main Motor Locked
• Description: There is a problem in the main motor.
• Troubleshooting Guides: Open and then close the front cover.

• Code: 23
• Display: Mail Exceeds Server Support
• Description: The mail size is larger than the supported size by SMTP server.
• Troubleshooting Guides: Divide your mail or reduce the resolution.

• Code: 24
• Display: Memory Full
• Description: The memory is full.
• Troubleshooting Guides: Delete unnecessary fax jobs and retransmit after more memory becomes available. Alternatively, split the transmission into more than one operation.

• Code: 25
• Display: MP Tray Paper Empty
• Description: There is no paper in the multi-purpose tray.
• Troubleshooting Guides: Load paper in the multi-purpose tray.

• Code: 26
• Display: Network Error
• Description: There is a problem with the network.
• Troubleshooting Guides: Contact your network administrator

• Code: 27
• Display: [No Answer]
• Description: The receiving fax machine has not answered after several redial attempts
• Troubleshooting Guides: Try again. Make sure that the receiving machine is operational.

• Code: 28
• Display: Not Assigned
• Description: The one-touch dial or speed dial number you tried to use has no number or email address assigned to it.
• Troubleshooting Guides: Enter the number or email address manually using the number keypad or store the number or address.

• Code: 29
• Display: [No Paper] Add Paper
• Description: The paper in the tray has run out.
• Troubleshooting Guides: Load paper in the tray

• Code: 30
• Display: One Page is Too Large
• Description: Single page data exceeds the configured mail size
• Troubleshooting Guides: Reduce the resolution and try again.

• Code: 31
• Display: Open Heat Error Cycle Power
• Description: There is a problem in the fuser unit.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, Replace to the Fuser Unit

• Code: 32
• Display: Operation Not Assigned
• Description: You are in the Add Page/Cancel Job operation, but there are no jobs stored.
• Troubleshooting Guides: Check the display to see if there are any scheduled jobs.

• Code: 33
• Display: Over Heat Error Cycle Power
• Description: There is a problem in the fuser unit.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, Replace to the Fuser Unit

• Code: 34
• Display: Paper Jam 0 Open/Close Doorel
• Description: Paper has jammed in the feeding area of the tray.
• Troubleshooting Guides: Clear the jam.

• Code: 35
• Display: Paper Jam 1 Open/Close Door
• Description: Paper has jammed in the fuser area.
• Troubleshooting Guides: Clear the jam.

• Code: 36
• Display: Paper Jam 2 Check Inside
• Description: Paper has jammed in the paper exit area.
• Troubleshooting Guides: Clear the jam.

• Code: 37
• Display: Power Failure
• Description: Power has turned off then on and the machine’s memory has not been back up.
• Troubleshooting Guides: The job which you were trying to do before the power failure must be completely re-done.

• Code: 38
• Display: Replace Drum
• Description: The drum cartridge is at the end of its life.
• Troubleshooting Guides: Replace the drum cartridge.

• Code: 39
• Display: Retry Redial?
• Description: The machine is waiting for a specified time interval to redial a previously busy station.
• Troubleshooting Guides: You can press OK to immediately redial, or Stop/Clear to cancel the redial operation.

• Code: 40
• Display: Scanner locked
• Description: The scanner module is locked
• Troubleshooting Guides: Unlock the scanner and press Stop/Clear.

• Code: 41
• Display: Self Diagnostic LSU
• Description: The LSU (Laser Scanning Unit) in your printer is checking some problems detected.
• Troubleshooting Guides: Please wait a few minutes.

• Code: 42
• Display: Self Diagnostic Temperature
• Description: The engine in your machine is checking some problems detected.
• Troubleshooting Guides: Please wait a few minutes.

• Code: 43
• Display: Send Error (AUTH)
• Description: There is a problem in SMTP authentication.
• Troubleshooting Guides: Configure the authentication setting.

• Code: 44
• Display: Send Error (DNS)
• Description: There is a problem in DNS.
• Troubleshooting Guides: Configure the DNS setting.

• Code: 45
• Display: Send Error (POP3)
• Description: There is a problem in POP3.
• Troubleshooting Guides: Configure the POP3 setting.

• Code: 46
• Display: Send Error (SMTP)
• Description: There is a problem in SMTP
• Troubleshooting Guides: Change to the available server.

• Code: 47
• Display: Send Error (Wrong Config)
• Description: There is a problem on the network interface card.
• Troubleshooting Guides: Configure your network interface card correctly.

• Code: 48
• Display: [Stop Pressed]
• Description: Stop/Clear has been pressed during a fax transmission.
• Troubleshooting Guides: Try again.

• Code: 49
• Display: Tray 1 Paper Empty
• Description: There is no paper in the tray 1.
• Troubleshooting Guides: Load paper in the tray 1.

• Code: 50
• Display: Tray 2 Paper Empty
• Description: There is no paper in the optional tray 2.
• Troubleshooting Guides: Load paper in the optional tray 2.

– Get more information about Epson XP 15000 troubleshooting, click here

– Get more error code list with quick guide to fix printer product, click here

– About get help with reseting Epson inkpad or others, click here

Samsung printer reset software introduction:

Notes before resetting Samsung printer:

– Identify accurate version, serial and crum of Samsung printer.
– How to get Samsung printer model info: Click Here
– Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.
– It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.
– And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the “UPS” (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
– This firmware will be installed directly to your printer. Before opening firmare link make sure that printer is turned on and connected to your computer and printer drivers are installed correctly.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!

How To Run Firmware Fix Samsung printer

1. Connect the printer to the computer and turn it on.
2. Wait until the printer is ready for work.
3. Drag and drop *.hd to usbprns2.exe file.

4. The reprogramming process starts automatically.
5. Wait until the printer reprograms (10-20 minute) and restarts.
6. After that the reprogramming process is finished, restart the printer.

Contact us to get support with Samsung SCX6122FN Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.