Solved Roland FP740 Hi-Fi Express Error Codes
– Printer model: Roland FP740 Hi-Fi Express
– Error codes on Roland FP740 Hi-Fi Express model and its description:
– Roland FP740 Hi-Fi Express printer Error Codes and quick guide to troubleshooting:
- Code: 0002
- Description: Disorder of communication with Sub CPU. This occurs when the Sub CPU is not detected after turning on the machine.
- Causes: Sub Board does not work correctly. Sub CPU does not work correctly. A bad connection between Main Board and Servo Board.
- Troubleshooting Guides: Check cable connection of Main Board – Servo Board. Servo Board replacement Main Board replacement
- Code: 0101
- Description: Limit Position Initialize has not been done.
- Causes: Limit Position Initialize has not been done correctly.
- Troubleshooting Guides: Carry out Limit Position Initialize.
- Code: 0102
- Description: Even though the machine takes a normal action, the output of Limit Sensor does not reach the desired value.
- Causes: Limit Sensor does not work correctly or is broken.
- Troubleshooting Guides: Limit Sensor replacement Check the backlash or loose with the driving parts of the carriage.
- Code: 0104
- Description: Even though the machine takes a regular action, the output of Capping Sensor does not reach the desired value.
- Causes: Capping Motor disorder Capping Unit does not work correctly Capping Sensor disorder Wiring or card cable has short-circuit or cut-line
- Troubleshooting Guides: Check cable connection of Servo Board Check cable connection of Junction Board Capping Motor replacement Capping unit replacement Capping Sensor replacement Flexible Cable replacement
- Code: 0107
- Description: Linear Encoder Setup has not been done.
- Causes: Linear Encoder Setup has not been done correctly
- Troubleshooting Guides: Carry out Linear Encoder Setup in service menu
- Code: 0108
- Description: Even though the machine takes normal action, the output of the Wiper Height Sensor does not reach the desired value.
- Causes: Disorder of Wiper Height Sensor Fault of Wiper Unit Fault of Wiper Height Sensor Cut-line or short-circuit of cable and card cable
- Troubleshooting Guides: Wiper Height Motor Replacement Wiper Unit Replacement Wiper Height Sensor Replacement Cable and Flexible Cable Replacement
- Code: 0109
- Description: Even though the machine takes a normal action, the output of the Wiper Sensor does not reach the desired value.
- Causes: Disorder of Wiper Sensor Fault of Wiper Unit Fault of Wiper Sensor Cut-line or short-circuit of Cable and Flexible Cable
- Troubleshooting Guides: Wiper Motor Replacement Wiper Unit Replacement Wiper Sensor Replacement Cable and Flexible Cable Replacement
- Code: 0110
- Description: Input value from Linear Encoder is not changed when Linear Encoder is setup the origin. When Motor stops during printing, Motor does not complete the movement which is supposed to be done.
- Causes: Reading error of Linear Encoder. Reading error of Encoder on Scan Motor side. Belt is not fixed to Head Carriage firmly.
- Troubleshooting Guides: Confirm if Encoder Scale is put in the slit of Encoder Module in whole width of the machine Check Cable connection between Linear Encoder Board and Print Carriage Board Confirm connection between Belt and Head Carriage Linear Encoder replacement Scan Motor replacement Main Board replacement
- Code: 0113
- Description: Viscous ink stays in the Storage. (Only when BU-1 is installed.)
- Causes: Printer has been idled for 2 months (56 days) or more.
- Troubleshooting Guides: Remove viscous ink from the Storage. 6-13 : Ink Removing Procedure for Service Call 0113
About Canon Servie Tool V5610
– Canon Service Tool V5610 is a tool used to perform maintenance on Canon printers and reset Canon printers after replacement of parts such as replacing ink absorbents, print heads, printer mainboard, and others. Based on the many cases we have encountered, the Service Tool is most often used to reset ink absorber counter value when the waste ink absorber is full.
– The ink absorber is going to be full of box, it has to be replaced or cleaned the waste ink absorber. Also, replaceing or cleaning the waste ink absorber, you need to repair or reset the waste ink counter value, cause those parts are concerned to each others.
– So using Canon Service Tool V5610 to reset the waste ink counter value becomes effective when the ink absorber is replaced or cleaned.
– Canon Service Tool V5610 can use to fix error code 5B00, 5B02, 5B04, 5B14, 1701, 1702, 1700 on your printer. You must enter Service Mode on your printer to use this Canon Service Tool.
– If the printer can not enter Service Mode, you can not reset it by Canon ST V5610. In this case, change EEPROM on the logic board.
Canon Service Tool V5610 Functions
– Fix Canon printer 7 times/ 8 times red light blinking:
– Fix Canon printer error code: 5B00, 5B01, 1700, 1701
Enter Service Mode on Canon Printer
1. Turn off a printer
2. Press and hold the Resume/Cancel/Stop button
3. Press and hold the ON button (do not release both buttons)
4. Release the Resume/Cancel/Stop button (do not release the ON button)
5. While holding the ON button, press the Resume/Cancel/Stop button 5 times, then release both the ON and Resume/Cancel/Stop buttons together.
– Canon printer in service mode: computer detects new hardware, led on printer goes green light.
For more information about Canon Serice Tool V5610
Contact us to get support with Roland FP740 Hi-Fi Express Error case
Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
