Panasonic FP7718 Error Codes list and fixing solutions

Panasonic FP7718 Error Codes list and fixing solutions

– Compatible Printer model: Panasonic FP7718
– Panasonic FP7718 Error Code List and description errors:

• Code: E1-01
• Description: Scan home problem

• Code: E1-21
• Description: Half speed scan home sensor problem

• Code: E1-22
• Description: 5th & 6th mirror unit sensor problem

• Code: E1-23
• Description: Original registration input problem

• Code: E1-32
• Description: No density detection of auto original

• Code: E1-40
• Description: Optics fan not A working

• Code: E1-41
• Description: Optics fan B not working

• Code: E2-20
• Description: Bypass feed sensor

• Code: E3-03
• Description: Toner density sensor

• Code: E3-10
• Description: High voltage problem

• Code: E3-20
• Description: Drive problem

• Code: E3-22
• Description: blanking prevention film problem

• Code: E3-29
• Description: Discharge lamp problem

• Code: E4-01
• Description: Low fuser temperature

• Code: E4-10
• Description: Fuser fan problem

• Code: E5-01
• Description: 24 volt problem

• Code: E5-04
• Description: 10 volt problem

• Code: E5-35
• Description: EEPROM problem

• Code: J00
• Description: Bypass feed jam

• Code: J01
• Description: Cassette feed jam

• Code: J02
• Description: Paper feed unit jam

• Code: J06
• Description: Paper feed unit jam

• Code: J08
• Description: Bypass feed jam

• Code: J19
• Description: Bypass feed jam

– Panasonic FP7718 Error codes and solution steps to fix:

• Code: J20
• Description: Paper feed jam

• Code: J21
• Description: Paper jam in registration area

• Code: J30
• Description: Paper jam in center of machine

• Code: J40
• Description: Fuser exit jam

• Code: J41
• Description: Fuser exit jam

• Code: J70
• Description: ADF jam

• Code: o
• Description: In power save mode. Press any key

• Code: O
• Description: In standby mode. Press any key

• Code: P-
• Description: Add paper

• Code: U10
• Description: Document feeder interlock

• Code: U13
• Description: Add toner. Could also be toner density sensor, toner feed system, or main board. Note: To clear U13, any key must be pressed. If this does not clear the U13, see F5-63 to determine which keys for which machine must be pressed.

• Code: U16
• Description: Developer unit not installed properly, or connector problem.

• Code: U6
• Description: Paper feed console interlock

Contact us to get support with Panasonic FP7718 Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/