Panasonic DP130 Error Codes list and fixing solutions

Panasonic DP130 Error Codes list and fixing solutions

– Compatible Printer model: Panasonic DP130
– Panasonic DP130 Error Code List and description errors:

• Code: E1-01
• Description: Optics scanning failure
  The home position sensor is NOT turned ON/OFF within the defined pulses after starting scanning.

• Code: E1-20
• Description: HSYNC (LSYNC) malfunction
  LSYNC is not generated or within the defined time after the laser is turned ON.

• Code: E1-22
• Description: Polygon motor malfunction
  Fail to detect the sync signal of the polygon motor rotation.

• Code: E1-23
• Description: Registration adjustment failure
  Fail to adjust the scanner registration.

• Code: E1-30
• Description: CCD gain adjustment failure
  Fail to adjust the CCD gain.

• Code: E1-31
• Description: Exposure lamp ON failure
  The exposure lamp is NOT turned ON.

• Code: E1-32
• Description: Exposure lamp OFF failure
  The exposure lamp is NOT turned OFF.

• Code: E1-33
• Description: CCD offset adjustment failure
  Fail to adjust the CCD offset.

• Code: E3-10
• Description: High voltage power supply leak
  Detect the HVPS leak for charging.

• Code: E3-20
• Description: Main motor rotation abnormality
  Detect the synchronous error despite the assignment to rotate the main motor. Or detect the motor rotating normally despite the assignment to stop it.

• Code: E4-01
• Description: Thermistor malfunction
  The fuser temperature sensor malfunction.

• Code: E4-01
• Description: Temperature control failure
  Fail to reach the defined temperature within the defined time after the fuser lamp is turned ON.

• Code: E4-10
• Description: Fan malfunction
  Detect the exhaust fan rotating despite the assignment to stop it. Or detect the fan stopped despite the assignment to rotate it.

• Code: E5-01
• Description: DC24V power supply abnormality
  Fail to output DC24V.

• Code: E5-04
• Description: DC12V power supply abnormality
  Fail to output DC12V when ready.

• Code: E5-05
• Description: Scanner 24V power supply abnormality
  Detect an error with the scanner 24V power supply control.

• Code: E5-18
• Description: Shading adjustment error
  An error occurs when adjusting the shading (black or white).

• Code: E5-30
• Description: Energy-saver microcomputer failure
  Communication error of the energy-saver microcomputer.

• Code: E5-35
• Description: FROM card write error
  Write error for the flash ROM.

• Code: E5-41
• Description: Registration control PCB malfunction
  The optics scanning or registration is • working despite the assignment to stop it. • not working within the defined time despite the assignment to work.

• Code: E5-42
• Description: Total counter error
  Counter cable is disconnected

• Code: E5-50
• Description: FIFO operation error
  Detect the operation failure of FIFO.

• Code: E5-55
• Description: PM2 error
  PM2 stops abnormally.

• Code: E5-58
• Description: D/A transfer failure
  DAC transfer completion interruption timeout error for CCD setting.

– Panasonic DP130 Error codes and solution steps to fix:

• Code: E5-59
• Description: Scanner LSYNC abnormality
  SLSYNC interruption timeout error when detecting a peak

• Code: E5-72
• Description: GA#1 α 1 access failure
  GA#1 α 1 verify error (Image processing format error)

• Code: E5-73
• Description: GA#1 α 2 access failure
  GA#1 α 2 verify error (Other errors)

• Code: E5-74
• Description: GA#1 α SRAM access failure
  GA#1 α built-in SRAM error

• Code: E5-75
• Description: GA#1 α CLK access failure
  GA#1 α built-in white shading RAM error

• Code: E5-76
• Description: GA#2 access failure
  GA#2 verify error

• Code: E5-77
• Description: GA#3 R/W error
  GA#3 Read/Write hard error

• Code: E5-89
• Description: GA#1 R/W error
  GA#1 Read/Write hard error

• Code: E5-99
• Description: Fatal error
  Fatal error occurs with unknown case.

• Code: J01
• Description: Paper tray slip jam

• Code: J17
• Description: The paper pass sensor remains ON after the defined time elapsed.

• Code: J30
• Description: When feeding paper from the sheet bypass: The registration roller paper pass sensor is NOT turned OFF within the defined time after the registration roller is turned ON.

• Code: J31
• Description: When feeding paper from the paper tray: The registration roller paper pass sensor is NOT turned OFF within the defined time after the registration roller is turned ON.

• Code: J33
• Description: The registration roller paper pass sensor still remains ON. (Jam remains)

• Code: J40
• Description: The paper exit sensor is NOT turned ON within the defined time after the registration roller is turned ON.

• Code: J41
• Description: The paper exit sensor is NOT turned OFF within the defined time.

• Code: J42
• Description: The paper exit sensor still remains ON. (Jam remains)

• Code: J99
• Description: Others

• Code: U1
• Description: Right cover (opened)

Contact us to get support with Panasonic DP130 Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/