Brother HL2400C fix error codes list
– Compatible Printer model: Brother HL2400C
– Brother HL2400C Error Codes with instructions guide:
- Code: C3
- Description: NVRAM Error (MCTL PCB)
- Code: C4
- Description: Engine Controller MCTL PCB Hardware Error
- Code: C7
- Description: Process Timing Clock Error (Main Motor Clock Error)
- Code: D1
- Description: Clutch Error of the Yellow Developing Unit
- Code: D2
- Description: Clutch Error of the Magenta Developing Unit
- Code: D3
- Description: Clutch Error of the Cyan Developing Unit
- Code: D4
- Description: Clutch Error of the Black Developing Unit
- Code: D5
- Description: HPSI Signal Error (Retract Error of Black and Yellow Toner Cartridge)
- Code: D6
- Description: HPSI Signal Error (Retract Error of Cyan and Magenta Toner Cartridge)
- Code: E1
- Description: Developing Motor Error
- Code: E2
- Description: Main Motor Error
- Code: E3
- Description: Transfer Drum Rotational Error
- Code: E4
- Description: Toner Sensor PCB Error
- Code: E5
- Description: Transfer Roller Solenoid Error
- Code: E6
- Description: Brush Cleaner Solenoid Error
- Code: E7
- Description: Brush Cleaner Clutch Error
- Code: E8
- Description: Fusing Unit Clutch error
- Code: E9
- Description: Belt Sensor Error
- Code: EL
- Description: Erase Lamp Error
- Code: F0
- Description: Control Fan Error
- Code: F2
- Description: Ozone Fan (1) Error
- Code: F4
- Description: Fuser Fan Error
- Code: F5
- Description: Charging HV (DC High Voltage) Error
- Code: H0
- Description: Fuser Thermistor Error
- Code: H2
- Description: Fusing Temperature Error (Warming-up Time Error)
- Code: H3
- Description: Fusing Temperature (3) Error (Heater Continuous ON Time Error)
- Code: H4
- Description: Fusing Temperature (4) Error (Heater Continuous ON Time Error)
- Code: L1
- Description: Beam Sensor Error
- Code: L2
- Description: Scanner Motor Error
- Code: LL
- Description: Laser Power Error
Solved Brother HL2400C Error codes
– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here
About Canon Servie Tool V5610
– Canon Service Tool V5610 is a tool used to perform maintenance on Canon printers and reset Canon printers after replacement of parts such as replacing ink absorbents, print heads, printer mainboard, and others. Based on the many cases we have encountered, the Service Tool is most often used to reset ink absorber counter value when the waste ink absorber is full.
– The ink absorber is going to be full of box, it has to be replaced or cleaned the waste ink absorber. Also, replaceing or cleaning the waste ink absorber, you need to repair or reset the waste ink counter value, cause those parts are concerned to each others.
– So using Canon Service Tool V5610 to reset the waste ink counter value becomes effective when the ink absorber is replaced or cleaned.
– Canon Service Tool V5610 can use to fix error code 5B00, 5B02, 5B04, 5B14, 1701, 1702, 1700 on your printer. You must enter Service Mode on your printer to use this Canon Service Tool.
– If the printer can not enter Service Mode, you can not reset it by Canon ST V5610. In this case, change EEPROM on the logic board.
Canon Service Tool V5610 Functions
– Fix Canon printer 7 times/ 8 times red light blinking:
– Fix Canon printer error code: 5B00, 5B01, 1700, 1701
Enter Service Mode on Canon Printer
1. Turn off a printer
2. Press and hold the Resume/Cancel/Stop button
3. Press and hold the ON button (do not release both buttons)
4. Release the Resume/Cancel/Stop button (do not release the ON button)
5. While holding the ON button, press the Resume/Cancel/Stop button 5 times, then release both the ON and Resume/Cancel/Stop buttons together.
– Canon printer in service mode: computer detects new hardware, led on printer goes green light.
For more information about Canon Serice Tool V5610
– Get more information about Epson XP 15000 troubleshooting, click here
– Buy cheap key of Epson WIC Reset Tool, CLICK HERE
– Key Epson Adjustment Program, CLICK HERE
https://dnasofts.com/download-epson-xp-6100-driver-firmware-and-manuals/
Contact us to get support with Brother HL2400C Error case
Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.
Source:
https://dnasofts.com
https://shop.nguyendangnam.com/