Brother ADS2800W fix error codes list

Brother ADS2800W fix error codes list

– Compatible Printer model: Brother ADS2800W
– Brother ADS2800W Error Codes with instructions guide:

• Code: 8100
• Description: A document longer than the specified length was set and scanned.
• Remedy: <User Check> • Set the document length within the standard.
  1 Dirt on the eject roller Clean the eject roller. 2 Feed belt failure Replace the feed belt. 3 Feed motor failure Replace the feed motor. 4 Main PCB failure Replace the main PCB ASSY.

• Code: A200
• Description: The first side document scanning position sensor detected that the document length was 90 cm or more while scanning a document.
• Remedy: <User Check> • Set the document length within the standard. • Remove the jammed document.
  1 First side document scanning position actuator caught in sections of the machine Reattach the first side document scanning position actuator. 2 First side document scanning position sensor failure Replace the first side document scanning position sensor PCB. 3 Main PCB failure Replace the main PCB ASSY.

• Code: A300
• Description: The document scanning position sensor has not detected the document passing even after the document has been fed for the specified time.
• Remedy: <User Check> • Set a document within the specified size in the ADF correctly. • Remove the jammed document.
  1 Document scanning position actuator coming off Reattach the document scanning position actuator. 2 Connection failure of the first side document scanning position sensor harness Reconnect the first side document scanning position sensor harness. 3 Document scanning position sensor failure Replace the document scanning position sensor PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY.

• Code: A400
• Description: The front cover sensor detected an open front cover.
• Remedy: <User Check> • Close the front cover correctly.
  1 Connection failure of the front cover sensor harness Reconnect the front cover sensor harness. 2 Front cover sensor attachment failure Reattach the front cover sensor. 3 Front cover sensor failure Replace the front cover sensor. 4 Main PCB failure Replace the main PCB ASSY.

• Code: A700
• Description: Color parameter in the ROM does not match the first side or second side CIS.
• Remedy: 1 Old firmware Install the latest version of the firmware. 2 First side or second side CIS unit failure Replace the first side or second side CIS unit. 3 Main PCB failure Replace the main PCB ASSY.

• Code: A900
• Description: A scanning error occurred while scanning the image.
• Remedy: 1 Program malfunction Install the latest version of the firmware. 2 First side or second side CIS unit failure Replace the first side or second side CIS unit. 3 Main PCB failure Replace the main PCB ASSY.

• Code: AB00
• Description: The multi feeding sensor detected multiple documents.
• Remedy: <User Check> • Check that the thickness of the document is within the standard. • Check that the number of documents set in each tray is within the standard. • Moisten a soft cloth with cleaning solution. Gently and evenly wipe the pick up roller and reverse roller perpendicular to the direction of the rotation with the cloth to clean it. Note: Do not use any solution except the one packaged in the accessory (ethanol or detergent on the market). Failure to keep this instruction may cause the roller deterioration or machine break down.
  1 Incorrect multi feeding sensor threshold setting Reset the multi feeding sensor threshold. 2 Multi feeding sensor (Sent/ Receive) failure Replace the multi feeding sensor (Sent/ Receive). 3 Main PCB failure Replace the main PCB ASSY.

• Code: B000
• Description: Detected that the first side CIS flat cable or second side CIS flat cable was not inserted correctly.
• Remedy: 1 Connection failure of the first side or second side CIS flat cable Reconnect the first side or second side CIS flat cable. 2 First side or second side CIS unit flat cable failure Replace the first side or second side CIS unit flat cable. 3 First side or second side CIS unit failure Replace the first side or second side CIS unit. 4 Main PCB failure Replace the main PCB ASSY.

• Code: BB00
• Description: A white level not within the standard was scanned when function code 55 was executed.
• Remedy: 1 Dirty calibration sheet Replace the calibration sheet with a new one. 2 First side or second side CIS unit failure Replace the first side or second side CIS unit. 3 Main PCB failure Replace the main PCB ASSY.

• Code: BD00
• Description: A black level not within the standard was scanned when function code 55 was executed.
• Remedy: 1 Dirty calibration sheet Replace the calibration sheet with a new one. 2 First side or second side CIS unit failure Replace the first side or second side CIS unit. 3 Main PCB failure Replace the main PCB ASSY.

• Code: D800
• Description: An error occurred while initializing the touch panel.
• Remedy: <User Check> • Check that nothing is on the touch panel.
  1 Old firmware Install the latest version of the firmware. 2 Connection failure of the touch panel harness Reconnect the touch panel harness. 3 Touch panel failure Replace the touch panel ASSY. 4 Panel PCB failure Replace the panel PCB. 5 Main PCB failure Replace the main PCB ASSY.

• Code: E000
• Description: An error occurred in the ROM check sum.
• Remedy: 1 Program malfunction Install the latest version of the firmware. 2 Main PCB failure Replace the main PCB ASSY.

• Code: E100
• Description: Program error
• Remedy: 1 Program malfunction Install the latest version of the firmware. 2 Main PCB failure Replace the main PCB ASSY.

• Code: E500
• Description: An error occurred during access to the DRAM in the main PCB ASSY.
• Remedy: 1 Main PCB failure Replace the main PCB ASSY.

• Code: E600
• Description: Write error in the EEPROM of the main PCB ASSY
• Remedy: 1 Main PCB failure Replace the main PCB ASSY.

• Code: E900
• Description: Failed to initialize the NFC module.
• Remedy: 1 Connection failure of the panel PCB flat cable Reconnect the panel PCB flat cable. 2 Panel PCB failure Replace the panel PCB ASSY. 3 NFC PCB failure Replace the NFC PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY.

• Code: EC00
• Description: An USB device not within the specifications is connected to the USB terminal, resulting in overcurrent.
• Remedy: <User Check> • Disconnect the USB device from the USB terminal and turn the machine OFF. Turn the machine ON again after a while. • Replace the USB device with a different one.
  1 USB host PCB failure Replace the USB host PCB ASSY. 2 Main PCB failure Replace the main PCB ASSY.

• Code: F900
• Description: The country code was not entered correctly.
• Remedy: 1 The country code was not entered correctly. Reenter the country code. (Refer to ‘Setting by country (function code: 74)’) 2 Main PCB failure Replace the main PCB ASSY.

Solved Brother ADS2800W Error codes

– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here

About Canon Servie Tool V5610

– Canon Service Tool V5610 is a tool used to perform maintenance on Canon printers and reset Canon printers after replacement of parts such as replacing ink absorbents, print heads, printer mainboard, and others. Based on the many cases we have encountered, the Service Tool is most often used to reset ink absorber counter value when the waste ink absorber is full.
– The ink absorber is going to be full of box, it has to be replaced or cleaned the waste ink absorber. Also, replaceing or cleaning the waste ink absorber, you need to repair or reset the waste ink counter value, cause those parts are concerned to each others.
– So using Canon Service Tool V5610 to reset the waste ink counter value becomes effective when the ink absorber is replaced or cleaned.

– Canon Service Tool V5610 can use to fix error code 5B00, 5B02, 5B04, 5B14, 1701, 1702, 1700 on your printer. You must enter Service Mode on your printer to use this Canon Service Tool.
– If the printer can not enter Service Mode, you can not reset it by Canon ST V5610. In this case, change EEPROM on the logic board.

Canon Service Tool V5610 Functions

– Fix Canon printer 7 times/ 8 times red light blinking:

– Fix Canon printer error code: 5B00, 5B01, 1700, 1701

Enter Service Mode on Canon Printer

1. Turn off a printer
2. Press and hold the Resume/Cancel/Stop button
3. Press and hold the ON button (do not release both buttons)
4. Release the Resume/Cancel/Stop button (do not release the ON button)
5. While holding the ON button, press the Resume/Cancel/Stop button 5 times, then release both the ON and Resume/Cancel/Stop buttons together.
– Canon printer in service mode: computer detects new hardware, led on printer goes green light.
For more information about Canon Serice Tool V5610

– Get more information about Epson XP 15000 troubleshooting, click here
– Buy cheap key of Epson WIC Reset Tool, CLICK HERE
– Key Epson Adjustment Program, CLICK HERE
https://dnasofts.com/download-epson-xp-6100-driver-firmware-and-manuals/

Contact us to get support with Brother ADS2800W Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.

Source:
https://dnasofts.com
https://shop.nguyendangnam.com/