Xerox 5622 error and solving error codes
– Compatible Printer model: Xerox 5622
– Xerox 5622 Error Codes with quick guides:
- Code: A1-1 … A1-32
- Description: All indicate a paper path problem, etc. in the ADF.
- Code: A1-1 … A1-32
- Description: All indicate a paper path problem, etc. in the ADF.
- Code: A2
- Description: ADF exit problems
- Code: A2
- Description: ADF exit problems
- Code: A3
- Description: Irregular size documents
- Code: A3
- Description: Irregular size documents
- Code: A5
- Description: ADF interlock
- Code: A5
- Description: ADF interlock
- Code: A6
- Description: ADF single sheet document reset.
- Code: A6
- Description: ADF single sheet document reset.
- Code: A7
- Description: Platen interlock
- Code: A7
- Description: Platen interlock
Solve Xerox 5622 Error codes
- Code: A8
- Description: ADF exit interlock
- Code: A8
- Description: ADF exit interlock
- Code: C1
- Description: Tray 1 jam
- Code: C1
- Description: Tray 1 jam
- Code: C2
- Description: Tray 2 jam
- Code: C2
- Description: Tray 2 jam
- Code: C3
- Description: Tray 3 jam
- Code: C3
- Description: Tray 3 jam
- Code: C6-1, C6-2
- Description: Jams related to duplex
- Code: C6-1, C6-2
- Description: Jams related to duplex
- Code: C6-3
- Description: Registration sensor, re tray 1
- Code: C6-3
- Description: Registration sensor, re tray 1
- Code: C7-1, C7-2
- Description: HCF feed problems
- Code: C7-1, C7-2
- Description: HCF feed problems
- Code: C7-3
- Description: Tray 1 feed problem
- Code: C7-3
- Description: Tray 1 feed problem
- Code: C8
- Description: Paper stays in tray or duplex or HCF
- Code: C8
- Description: Paper stays in tray or duplex or HCF
- Code: C9
- Description: Bypass feed problem
- Code: C9
- Description: Bypass feed problem
- Code: E1-10 … E1-25
- Description: Internal jam
- Code: E1-10 … E1-25
- Description: Internal jam
- Code: E1-6
- Description: Paper on registration sensor
- Code: E1-6
- Description: Paper on registration sensor
- Code: E2
- Description: Reset signal happened. Might read E-2 something else.
- Code: E2
- Description: Reset signal happened. Might read E-2 something else.
- Code: E3-30 … E4-14
- Description: Exit jam
- Code: E3-30 … E4-14
- Description: Exit jam
- Code: E3-6
- Description: Exit jam
- Code: E3-6
- Description: Exit jam
- Code: E4-10 … E4-14
- Description: Inverter sensor not actuated.
- Code: E4-10 … E4-14
- Description: Inverter sensor not actuated.
- Code: E4-15
- Description: Inverter sensor
- Code: E4-15
- Description: Inverter sensor
- Code: E4-40, E4-41, E4-12, E4-43, E4-44, E4-45
- Description: Duplex entry sensor
- Code: E4-40, E4-41, E4-12, E4-43, E4-44, E4-45
- Description: Duplex entry sensor
- Code: E4-6
- Description: Inverter sensor
- Code: E4-6
- Description: Inverter sensor
- Code: E5
- Description: Front door interlock
- Code: E5
- Description: Front door interlock
- Code: E6-1
- Description: Tray 1 interlock
- Code: E6-1
- Description: Tray 1 interlock
- Code: E6-2
- Description: 2 tray or duplex interlock
- Code: E6-2
- Description: 2 tray or duplex interlock
- Code: E6-3
- Description: HCF interlock
- Code: E6-3
- Description: HCF interlock
- Code: E7-2,-3
- Description: Duplex interlock
- Code: E7-2,-3
- Description: Duplex interlock
- Code: E8-6 … E8-15
- Description: Duplex entry sensor
- Code: E8-6 … E8-15
- Description: Duplex entry sensor
- Code: F1-1
- Description: Sorter entry sensor
- Code: F1-1
- Description: Sorter entry sensor
- Code: F1-6
- Description: Sorter exit sensor
- Code: F1-6
- Description: Sorter exit sensor
- Code: F3
- Description: Paper size not available for sort/stack
- Code: F3
- Description: Paper size not available for sort/stack
- Code: F5
- Description: Sorter interlock
- Code: F5
- Description: Sorter interlock
- Code: J1
- Description: Add toner
- Code: J1
- Description: Add toner
- Code: J3
- Description: Replace copy cartridge
- Code: J3
- Description: Replace copy cartridge
- Code: J7
- Description: Replace copy cartridge
- Code: J7
- Description: Replace copy cartridge
- Code: J8-1
- Description: Wrong copy cartridge installed
- Code: J8-1
- Description: Wrong copy cartridge installed
- Code: J8-2
- Description: Copy cartridge EEPROM
- Code: J8-2
- Description: Copy cartridge EEPROM
- Code: L6
- Description: Auditron or other counter problem
- Code: L6
- Description: Auditron or other counter problem
- Code: L8
- Description: Platen glass temperature is too high
- Code: L8
- Description: Platen glass temperature is too high
- Code: L9
- Description: Communication problem between interimage erase/edge lamps and main board
- Code: L9
- Description: Communication problem between interimage erase/edge lamps and main board
- Code: U1-1
- Description: Main motor drive problem
- Code: U1-1
- Description: Main motor drive problem
- Code: U2-1, U2-2, U2-3, U2-4
- Description: Scan home sensor
- Code: U2-1, U2-2, U2-3, U2-4
- Description: Scan home sensor
- Code: U3-1
- Description: Lens sensor
- Code: U3-1
- Description: Lens sensor
- Code: U4-1
- Description: Open fuser thermistor
- Code: U4-1
- Description: Open fuser thermistor
- Code: U4-2
- Description: Fuser did not warm up properly
- Code: U4-2
- Description: Fuser did not warm up properly
- Code: U4-3
- Description: Fuser temperature too high
- Code: U4-3
- Description: Fuser temperature too high
- Code: U4-4
- Description: Fuser problem. Staying on too long
- Code: U4-4
- Description: Fuser problem. Staying on too long
- Code: U4-6
- Description: High fuser temperature
- Code: U4-6
- Description: High fuser temperature
- Code: U5-1
- Description: Sorter bin home switch not activated
- Code: U5-1
- Description: Sorter bin home switch not activated
- Code: U5-2
- Description: Sorter bin home switch stayed actuated
- Code: U5-2
- Description: Sorter bin home switch stayed actuated
- Code: U5-3
- Description: Sorter bin home switch
- Code: U5-3
- Description: Sorter bin home switch
- Code: U5-4
- Description: Sorter bin home switch
- Code: U5-4
- Description: Sorter bin home switch
- Code: U6-1
- Description: ROM problem
- Code: U6-1
- Description: ROM problem
- Code: U6-2
- Description: RAM problem
- Code: U6-2
- Description: RAM problem
- Code: U6-3
- Description: Low battery
- Code: U6-3
- Description: Low battery
- Code: U6-4
- Description: Incorrect value in NVM. Reinitialize main board with code 20-96
- Code: U6-4
- Description: Incorrect value in NVM. Reinitialize main board with code 20-96
- Code: U8-1, U8-2, U8-3, U8-4, U8-5, U8-6
- Description: Problem with exposure lamp, lamp sensor, lamp board
– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here
– Get more information about Epson XP 15000 troubleshooting, click here
Xerox printer reset software introduction:
Notes before resetting Xerox printer:
– Identify accurate version, serial and crum of Xerox printer.
– How to get Xerox printer model info: Click Here
– Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.
– It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.
– And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the “UPS” (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
– This firmware will be installed directly to your printer. Before opening firmare link make sure that printer is turned on and connected to your computer and printer drivers are installed correctly.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!
How To Run Firmware Fix Xerox printer
1. Connect the printer to the computer and turn it on.
2. Wait until the printer is ready for work.
3. Drag and drop *.hd to usbprns2.exe file.
4. The reprogramming process starts automatically.
5. Wait until the printer reprograms (10-20 minute) and restarts.
6. After that the reprogramming process is finished, restart the printer.
– Fix Xerox B205 Toner Empty Error, click here
Contact us to get support with Xerox 5622 Error case
Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.
