Xerox 5352 error and solving error codes
– Compatible Printer model: Xerox 5352
– Xerox 5352 Error Codes with quick guides:
- Code: 00-009, 00-030, 00-031, 00-032, 00-033
- Description: A door was opened while paper was being fed
- Code: 00-047
- Description: Paper in duplex
- Code: 00-1
- Description: Auditron
- Code: 00-2
- Description: Diagnostic error
- Code: 00-3
- Description: Faults error
- Code: 00-4
- Description: Ric error
- Code: 00-5
- Description: Job manager system error
- Code: 00-6
- Description: LLM interface
- Code: 00-7
- Description: Standby error
- Code: 00-8
- Description: Communications error
- Code: 00-9
- Description: Xerographic error
- Code: 01-300
- Description: Front interlock
Solve Xerox 5352 Error codes
- Code: 01-310
- Description: Right upper interlock
- Code: 01-315
- Description: Left upper interlock
- Code: 01-320
- Description: Left lower interlock
- Code: 01-325
- Description: Fuser interlock
- Code: 02-910
- Description: Key counter missing
- Code: 02-920
- Description: Wrong combination of accessories
- Code: 03-321, 03-322, 03-326, 03-327
- Description: LLM to ISIL communications problems
- Code: 03-328
- Description: IOT communications problem with duplex or tray 4
- Code: 03-330
- Description: IOT communications problems with HCF
- Code: 03-335, 336
- Description: LLM communications problems with edit
- Code: 03-340
- Description: NVM memory
- Code: 03-341-347
- Description: Communications problems between IOT and sorter
- Code: 03-350-354
- Description: Communications problem with LLM and user interface
- Code: 03-363, 364
- Description: Communications problem between LLM & optics
- Code: 03-370 … 03-373
- Description: Communications problem between LLM & DADF
- Code: 03-380, 03-384
- Description:
- Code: 03-416 … 03-422
- Description: RAM memory problem
- Code: 03-424, 03-426
- Description: NVM memory problem
- Code: 03-430, 03-432
- Description: Billing problem
- Code: 03-439
- Description: GRAIB communications problem
- Code: 03-440
- Description: RIC communications problem
- Code: 03-441
- Description: RIC NVM problem
- Code: 03-442
- Description: Modem
- Code: 03-443 … 03-458
- Description: RIC problems
- Code: 03-460
- Description: Serial communications processor problem
- Code: 04-300
- Description: Main motor or drive problem
- Code: 05-100, 05-108
- Description: DADF registration sensor
- Code: 05-110
- Description: DADF exit sensor
- Code: 05-115, 05-120
- Description: DADF jams
- Code: 05-305
- Description: DADF document drive
- Code: 05-310, 05-312
- Description: DADF document sensor
- Code: 05-316
- Description: DADF registration sensor jam
- Code: 05-325
- Description: DADF exit sensor
- Code: 05-335, 05-341, 05-345
- Description: DADF interlock switches
- Code: 06-300 … 06-310
- Description: Scan problems
- Code: 06-315
- Description: Scan drive
- Code: 06-320A, 06-320B, 06-320C, 06-325
- Description: Scan problem
- Code: 06-330
- Description: Lens drive
- Code: 06-340
- Description: Exposure control problem
- Code: 06-342
- Description: LLM CPU problem
- Code: 06-344 … 06-350
- Description: Exposure cvontrol problem
- Code: 06-352
- Description: IOT CPU problem
- Code: 07-300, 07-315, 07-330, 07-345
- Description: Tray faults
- Code: 07-360 … 07-370
- Description: HCF problems
- Code: 07-375, 07-380A, 07-380B
- Description: Duplex problems
- Code: 08-100 … 08-110
- Description: Feed problems. Lead edge of copy paper is late getting to feed sensor of tray 1
- Code: 08-115 … 08-162
- Description: Feed problem. Lead edge of copy paper is late getting to registration sensor
- Code: 08-165
- Description: Paper jam at registration sensor
- Code: 08-310 … 08-370
- Description: Paper at a sensor when power is turned on
- Code: 08-330
- Description: DADF nudger sensor
- Code: 08-380
- Description: Registration side to side problem with home position
- Code: 08-390
- Description: Nip
- Code: 09-300
- Description: Copy cartridge finished (drum unit)
- Code: 09-310
- Description: Add black toner Add color toner
- Code: 09-320
- Description: Add color toner
- Code: 09-330
- Description: Wrong copy cartridge (wrong drum unit)
- Code: 09-340
- Description: Drum cartridge not installed properly
- Code: 09-350
- Description: Waste toner full
- Code: 10-100
- Description: Exit jam
- Code: 10-105
- Description: Exit jam
- Code: 10-110
- Description: Vertical sensor jam
- Code: 10-120, 10-122, 10-125
- Description: Duplex jam
- Code: 10-150, 10-155
- Description: Too much or not enough paper in duplex tray
- Code: 10-300
- Description: Fuser thermistor
- Code: 10-302
- Description: Low fuser temperature
- Code: 10-304
- Description: Bad fuser temp
- Code: 10-308
- Description: High fuser temperature or open thermistor
- Code: 10-310
- Description: High fuser temperature
- Code: 10-312
- Description: Fuser not up to temperature after energy save
- Code: 10-314
- Description: Fuser problem
- Code: 10-320
- Description: Fuser web finished
- Code: 10-330, 10-335, 10-340
- Description: Exit switch, vertical sensor switch actuated when power is turned on
- Code: 100
- Description: A fault has occurred
- Code: 11-100 … 11-116
- Description: Sorter jam
- Code: 11-150 … 11-176
- Description: Sorter auto stapler jam
- Code: 11-310, 11-314, 11-316
- Description: Sorter interlock
- Code: 11-325A, 11-325B, 11-325C, 11-325D, 11-325E, 11-325F, 11-325G
- Description: Sorter index
- Code: 11-352, 11-354, 11-356
- Description: Sorter auto stapler interlocks
- Code: 11-365A, 11-365B, 11-365C, 11-365D, 11-365E
- Description: Sorter auto stapler bin
- Code: 11-370, 11-371, 11-372A, 11-373A, 11-373B, 11-374
- Description: Sorter auto stapler staple failure, staple home problem or tamper home problem
- Code: 11-385A, 11-385B, 11-390A, 11-390B, 11-390C, 11-390D, 11-390E, 11-396A
- Description: Sorter auto stapler staple failure, staple home problem or tamper home problem
- Code: 301
- Description: Fuser web must be replaced
- Code: 302
- Description: Copy cartridge (drum unit) must be replaced
- Code: 501
- Description: Tray 1 must be rebuilt
- Code: 502
- Description: Tray 2 must be rebuilt
- Code: 503
- Description: Tray 3 must be rebuilt
- Code: 504
- Description: Tray 4 must be rebuilt
- Code: 505
- Description: HCF must be rebuilt
- Code: 506
- Description: Bypass must be rebuilt
- Code: 507
- Description: Duplex unit must be rebuilt
- Code: 508
- Description: Replace black developer
- Code: 509
- Description: Replace red developer
- Code: 510
- Description: Replace green developer
- Code: 512
- Description: Replace brown developer
- Code: 513
- Description: Copy cartridge (drum unit) will need replacing soon
- Code: 514
- Description: Fuser web will need replacing soon
- Code: 515
- Description: DADF belt should be replaced
- Code: 516
- Description: DADF feed rollers should be replaced
- Code: 517
- Description: Replace exposure lamp
- Code: 518
- Description: Replace suction filter
- Code: 519
- Description: Replace ozone filter
- Code: 520
- Description: Replace optics filter
- Code: 521
- Description: Replace particle filter
- Code: 522
- Description: Replace upper fuser roller
- Code: 523
- Description: Replace fuser pawls
– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here
– Get more information about Epson XP 15000 troubleshooting, click here
Xerox printer reset software introduction:
Notes before resetting Xerox printer:
– Identify accurate version, serial and crum of Xerox printer.
– How to get Xerox printer model info: Click Here
– Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.
– It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.
– And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the “UPS” (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
– This firmware will be installed directly to your printer. Before opening firmare link make sure that printer is turned on and connected to your computer and printer drivers are installed correctly.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!
How To Run Firmware Fix Xerox printer
1. Connect the printer to the computer and turn it on.
2. Wait until the printer is ready for work.
3. Drag and drop *.hd to usbprns2.exe file.
4. The reprogramming process starts automatically.
5. Wait until the printer reprograms (10-20 minute) and restarts.
6. After that the reprogramming process is finished, restart the printer.
– Fix Xerox B205 Toner Empty Error, click here
Contact us to get support with Xerox 5352 Error case
Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.
