[SOLVED] Quick fix Konica-Minolta C3110 list error codes

[SOLVED] Quick fix Konica-Minolta C3110 list error codes

– Compatible Printer model: Konica-Minolta bizhub C3110
– Konica-Minolta bizhub C3110 Error Codes with quick guides:

• Code: 0010
• Description: Color PC drum motor malfunction • The color PC drum motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the color PC drum motor is being rotated.
• Causes: • Color PC drum motor (M4) • Printer control board (PRCB)
• Troubleshooting Guides: 1 Check the connector between M4-PRCB CN12 for proper connection and correct as necessary. 2 Check the M4 connector for proper drive coupling and correct as necessary. 3 M4 operation check PRCB CN12-3 to 6 13-E 4 Replace M4. 5 Replace PRCB.

• Code: 0017
• Description: Transport motor malfunction • The transport motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the transport motor is being rotated.
• Causes: • Transport motor (M2) • Printer control board (PRCB)
• Troubleshooting Guides: 1 Check the connector between M2-PRCB CN11 for proper connection and correct as necessary. 2 Check the M2 connector for proper drive coupling and correct as necessary. 3 M2 operation check PRCB CN11-10 to 13 13-B to C 4 Replace M2. 5 Replace PRCB.

• Code: 0018
• Description: Developing motor malfunction • The developing motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the developing motor is being rotated.
• Causes: • Developing motor (M1) • Printer control board (PRCB)
• Troubleshooting Guides: 1 Check the connector between M1-PRCB CN11 for proper connection and correct as necessary. 2 Check the M1 connector for proper drive coupling and correct as necessary. 3 M1 operation check PRCB CN11-3 to 6 13-B to C 4 Replace M1. 5 Replace PRCB.

• Code: 004A
• Description: Cooling fan motor malfunction • The cooling fan motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the cooling fan motor is being rotated.
• Causes: • Cooling fan motor (FM11) • Printer control board (PRCB)
• Troubleshooting Guides: 1 Check the connector between FM11-relay CN29- PRCB CN10 for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 FM11 operation check PRCB CN10-5 (REM) PRCB CN10-7 (LOCK) 5-E 4 Replace FM11. 5 Replace PRCB.

• Code: 004E
• Description: Power supply cooling fan malfunction • The power supply cooling fan does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the power supply cooling fan is being rotated.
• Causes: • Power supply cooling fan (FM10) • Printer control board (PRCB)
• Troubleshooting Guides: 1 Check the connector between FM10-relay CN43- PRCB CN2 for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 FM10 operation check PRCB CN2-1 (REM) 12-L PRCB CN2-3 (LOCK) 4 Replace FM10. 5 Replace PRCB.

• Code: 0094
• Description: 2nd transfer pressure / retraction failure • The IDC sensor does not come into the condition where the level detection is available (retracted position = IDC sensor shutter is open) within a given period of time after the 2nd transfer pressure solenoid has turned ON. • The IDC sensor does not come into the condition where the level detection is not available (pressed position = IDC sensor shutter is closed) within a given period of time after the 2nd transfer pressure solenoid has turned ON.
• Causes: • IDC sensor (IDCS) • Transport motor (M2) • 2nd transfer pressure solenoid (SD2) • Printer control board (PRCB)
• Troubleshooting Guides: 1 Check the connector between M2-PRCB CN11 for proper connection and correct as necessary. 2 Check the M2 connector for proper drive coupling and correct as necessary. 3 Check the connector between IDCS-PRCB CN19 for proper connection and correct as necessary. 4 Check the connector between SD2-relay CN23-PRCB CN24 for proper connection and correct as necessary. 5 IDCS sensor check PRCB CN19-1 (IDC_D_LEFT) PRCB CN19-4 (IDC_CTL_LEFT) 13-K 6 SD2 operation check PRCB CN24-6 (REM) 5-D 7 M2 operation check PRCB CN11-10 to 13 13-B to C 8 Replace SD2. 9 Replace M2. 10 Replace IDCS. 11 Replace PRCB.

• Code: 0096
• Description: 1st transfer pressure / retraction failure • The 1st transfer pressure sensor is not activated (retracted position) within a given period of time after the 1st transfer pressure solenoid has turned ON. • The 1st transfer pressure sensor is not deactivated (pressed position) within a given period of time after the 1st transfer pressure solenoid has turned ON.
• Causes: • 1st transfer pressure sensor (PS17) • Transport motor (M2) • 1st transfer pressure solenoid (SD1) • Printer control board (PRCB)
• Troubleshooting Guides: 1 Check the connector between M2-PRCB CN11 for proper connection and correct as necessary. 2 Check the M2 connector for proper drive coupling and correct as necessary. 3 Check the connector between PS17-PRCB CN9 for proper connection and correct as necessary. 4 Check the connector between SD1-relay CN25-PRCB CN7 for proper connection and correct as necessary. 5 PS17 sensor check PRCB CN9-6 (ON) 12-J 6 SD1 operation check PRCB CN7-4 (REM) 13-D 7 M2 operation check PRCB CN11-10 to 13 13-B to C 8 Replace PS17. 9 Replace SD1. 10 Replace M2. 11 Replace PRCB.

• Code: 0101
• Description: Power malfunction When opening or closing the door and cover, a paper jam occurs, or the power is not supplied to the printer control board even after a specified period of time passed.
• Causes: • Front door sensor (PS10) • Right door sensor (PS11) • Front door switch (SW2) • Right door switch (SW3) • DC power supply (DCPU) • Printer control board (PRCB) • MFP board (MFPB) • PH unit
• Troubleshooting Guides: 1 Check the connector between PS10-PRCB CN15 for proper connection and correct as necessary. 2 Check the connector between PS11-PRCB CN15 for proper connection and correct as necessary. 3 Check the connector between PRCB CN5-MFPB CN16 for proper connection and correct as necessary. 4 Check the connector between DCPU CN4-relay CN90- SW2-SW3-relay CN90-PRCB CN1 for proper connection and correct as necessary. 5 Check the connector between DCPU CN3-PRCB CN3 for proper connection and correct as necessary. 6 Check the connector between PRCB CN18-relay CN63-PH unit for proper connection and correct as necessary. 7 PS10 sensor check PRCB CN15-3 (ON) 15-H 8 PS11 sensor check PRCB CN15-6 (ON) 15-H 9 Replace PRCB. 10 Replace DCPU. 11 Replace the PH unit. 12 Replace MFPB.

• Code: 0300
• Description: Polygon motor malfunction • The polygon motor does not rotate evenly even after the lapse of a given period of time after it has been started. • The motor lock signal remains HIGH for a given period of consecutive time while the polygon motor is being rotated.
• Causes: • PH unit • Printer control board (PRCB)
• Troubleshooting Guides: 1 Check the connector between PH unit-relay CN63- PRCB CN18 for proper connection and correct as necessary. 2 Replace the PH unit. 3 Replace PRCB.

• Code: 0310
• Description: Laser malfunction The SOS signal is not detected within a given period of time after the output of the laser has been started.
• Causes: • PH unit • Printer control board (PRCB) • MFP board (MFPB)
• Troubleshooting Guides: 1 Check the connector between PH unit-relay CN63- PRCB CN18 for proper connection and correct as necessary. 2 Check the connector between PH unit-MFPB CN15 for proper connection and correct as necessary. 3 Replace the PH unit. 4 Replace PRCB.

• Code: 0315
• Description: PH board communication error • Mismatching of data being written and read occurs continuously for certain times during communication with the PH board. • The EEPROM of the PH board is not yet initialized.
• Causes: • Front door sensor (PS10) • Right door sensor (PS11) • Front door switch (SW2) • Right door switch (SW3) • DC power supply (DCPU) • Printer control board (PRCB) • MFP board (MFPB) • PH unit
• Troubleshooting Guides: 1 Check the connector between PRCB CN18-relay CN63-PH unit for proper connection and correct as necessary. 2 Replace the PH unit. 3 Replace PRCB.

• Code: 0500
• Description: Heating roller warm-up failure The thermistor/1 does not detect the specified temperature and the warm-up cycle is not completed even after the lapse of a given period of time after the cycle has been started.
• Causes: • Fusing unit • Printer control board (PRCB) • DC power supply (DCPU)
• Troubleshooting Guides: 1 Check the fusing unit for correct installation (whether it is secured in position). 2 Check the connector between fusing unit-PRCB CN9 for proper connection and correct as necessary. 3 Check the connector between fusing unit-DCPU CN2 for proper connection and correct as necessary. 4 Replace the fusing unit. 5 Replace PRCB. 6 Replace DCPU.

• Code: 0502
• Description: Thermistor open-circuit failure The temperature detected by the thermistor/1 or thermistor/2 does not reach a predetermined level even after the lapse of a given period time after the warm-up cycle has been started.
• Causes: • Fusing unit • Printer control board (PRCB) • DC power supply (DCPU)
• Troubleshooting Guides: 1 Check the fusing unit for correct installation (whether it is secured in position). 2 Check the connector between fusing unit-PRCB CN9 for proper connection and correct as necessary. 3 Check the connector between fusing unit-DCPU CN2 for proper connection and correct as necessary. 4 Replace the fusing unit. 5 Replace PRCB. 6 Replace DCPU.

• Code: 0503
• Description: Thermistor resistance failure The difference between the temperature detected by thermistor/1 and that detected by thermistor/2 exceeds a predetermined value.
• Causes: • Fusing unit • Printer control board (PRCB) • DC power supply (DCPU)
• Troubleshooting Guides: 1 Check the fusing unit for correct installation (whether it is secured in position). 2 Check the connector between fusing unit-PRCB CN9 for proper connection and correct as necessary. 3 Check the connector between fusing unit-DCPU CN2 for proper connection and correct as necessary. 4 Replace the fusing unit. 5 Replace PRCB. 6 Replace DCPU.

• Code: 0510
• Description: Abnormally low heating roller temperature The temperature detected by the thermistor/1 or thermistor/2 remains lower than the specified value.
• Causes: • Fusing unit • Printer control board (PRCB) • DC power supply (DCPU)
• Troubleshooting Guides: 1 Check the fusing unit for correct installation (whether it is secured in position). 2 Check the connector between fusing unit-PRCB CN9 for proper connection and correct as necessary. 3 Check the connector between fusing unit-DCPU CN2 for proper connection and correct as necessary. 4 Replace the fusing unit. 5 Replace PRCB. 6 Replace DCPU.

• Code: 0520
• Description: Abnormally high heating roller temperature The temperature detected by the thermistor/1 or thermistor/2 remains higher than the specified value.
• Causes: • Fusing unit • Printer control board (PRCB) • DC power supply (DCPU)
• Troubleshooting Guides: 1 Check the fusing unit for correct installation (whether it is secured in position). 2 Check the connector between fusing unit-PRCB CN9 for proper connection and correct as necessary. 3 Check the connector between fusing unit-DCPU CN2 for proper connection and correct as necessary. 4 Replace the fusing unit. 5 Replace PRCB. 6 Replace DCPU.

• Code: 0F52
• Description: Toner level sensor/Y malfunction An error occurs on the toner level sensor/Y.
• Causes: • Toner level sensor/Y (PS13) • Printer control board (PRCB)
• Troubleshooting Guides: 1 Check the connector between each sensor-PRCB CN21 for proper connection and correct as necessary. 2 Replace the toner level sensor of the corresponding color. 3 Replace PRCB.

• Code: 0F53
• Description: Toner level sensor/M malfunction An error occurs on the toner level sensor/M.
• Causes: • Toner level sensor/M (PS14) • Printer control board (PRCB)
• Troubleshooting Guides: 1 Check the connector between each sensor-PRCB CN21 for proper connection and correct as necessary. 2 Replace the toner level sensor of the corresponding color. 3 Replace PRCB.

• Code: 0F54
• Description: Toner level sensor/C malfunction An error occurs on the toner level sensor/C.
• Causes: • Toner level sensor/C (PS15) • Printer control board (PRCB)
• Troubleshooting Guides: 1 Check the connector between each sensor-PRCB CN21 for proper connection and correct as necessary. 2 Replace the toner level sensor of the corresponding color. 3 Replace PRCB.

• Code: 0F55
• Description: Toner level sensor/K malfunction An error occurs on the toner level sensor/K.
• Causes: • Toner level sensor/K (PS16) • Printer control board (PRCB)
• Troubleshooting Guides: 1 Check the connector between each sensor-PRCB CN21 for proper connection and correct as necessary. 2 Replace the toner level sensor of the corresponding color. 3 Replace PRCB.

• Code: 13C4
• Description: Imaging unit/C new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set.
• Causes: • Imaging unit/C • Printer control board (PRCB)
• Troubleshooting Guides: 1 Reinstall the imaging unit. 2 Check the connector between imaging unit-PRCB CN221 for proper connection and correct as necessary. 3 Replace the imaging unit. 4 Replace PRCB.

• Code: 13C5
• Description: Imaging unit/M new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set.
• Causes: • Imaging unit/M • Printer control board (PRCB)
• Troubleshooting Guides: 1 Reinstall the imaging unit. 2 Check the connector between imaging unit-PRCB CN221 for proper connection and correct as necessary. 3 Replace the imaging unit. 4 Replace PRCB.

• Code: 13C6
• Description: Imaging unit/Y new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set.
• Causes: • Imaging unit/Y • Printer control board (PRCB)
• Troubleshooting Guides: 1 Reinstall the imaging unit. 2 Check the connector between imaging unit-PRCB CN221 for proper connection and correct as necessary. 3 Replace the imaging unit. 4 Replace PRCB.

• Code: 13C7
• Description: Imaging unit/K new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set.
• Causes: • Imaging unit/K • Printer control board (PRCB)
• Troubleshooting Guides: 1 Reinstall the imaging unit. 2 Check the connector between imaging unit-PRCB CN221 for proper connection and correct as necessary. 3 Replace the imaging unit. 4 Replace PRCB.

• Code: 13CB
• Description: Toner cartridge/C new release failure. The status with the new cartridge is not cleared continuously for 3 times after the new toner cartridge is set.
• Causes: • Toner cartridge/C • Printer control board (PRCB)
• Troubleshooting Guides: 1 Reinstall the toner cartridge. 2 Check the connector between toner cartridge-PRCB CN82 for proper connection and correct as necessary. 3 Replace the toner cartridge. 4 Replace PRCB.

• Code: 13CC
• Description: Toner cartridge/M new release failure. The status with the new cartridge is not cleared continuously for 3 times after the new toner cartridge is set.
• Causes: • Toner cartridge/M • Printer control board (PRCB)
• Troubleshooting Guides: 1 Reinstall the toner cartridge. 2 Check the connector between toner cartridge-PRCB CN82 for proper connection and correct as necessary. 3 Replace the toner cartridge. 4 Replace PRCB.

• Code: 13CD
• Description: Toner cartridge/Y new release failure. The status with the new cartridge is not cleared continuously for 3 times after the new toner cartridge is set.
• Causes: • Toner cartridge/Y • Printer control board (PRCB)
• Troubleshooting Guides: 1 Reinstall the toner cartridge. 2 Check the connector between toner cartridge-PRCB CN82 for proper connection and correct as necessary. 3 Replace the toner cartridge. 4 Replace PRCB.

• Code: 13CE
• Description: Toner cartridge/K new release failure. The status with the new cartridge is not cleared continuously for 3 times after the new toner cartridge is set.
• Causes: • Toner cartridge/K • Printer control board (PRCB)
• Troubleshooting Guides: 1 Reinstall the toner cartridge. 2 Check the connector between toner cartridge-PRCB CN82 for proper connection and correct as necessary. 3 Replace the toner cartridge. 4 Replace PRCB.

• Code: 13DD
• Description: Backup data error. The engine counter data and the controller counter data are inconsistent.
• Causes: • Printer control board (PRCB) • MFP board (MFPB)
• Troubleshooting Guides: 1 Select [SERVICE MODE] -> [BK CLEAR], and execute the BK Clear function. 2 Check the connector between MFPB CN16-PRCB CN5 for proper connection and correct as necessary. 3 Replace PRCB. 4 Replace MFPB.

• Code: 13E2
• Description: Engine flash ROM device fault. An erase error occurs during erasing of data in flash ROM.
• Causes: • Printer control board (PRCB) • MFP board (MFPB)
• Troubleshooting Guides: 1 Rewrite the engine firmware. 2 Replace PRCB.

• Code: 13E3
• Description: Engine flash ROM download communication error. Flash ROM writing is found faulty during a check.
• Causes: • Printer control board (PRCB) • MFP board (MFPB)
• Troubleshooting Guides: 1 Rewrite the engine firmware. 2 Replace PRCB.

• Code: 13F0
• Description: Engine control failure An undefined malfunction occurs in the engine section (PRCB, etc.).
• Causes: • Printer control board (PRCB) • MFP board (MFPB)
• Troubleshooting Guides: 1 Reboot the main body.

• Code: 3C00
• Description: EEPROM fault 1 (main body) An EEPROM communication error of the main body occurs.
• Causes: Printer control board (PRCB)
• Troubleshooting Guides: 1 Check the connectors on the PRCB for proper connection and correct any faulty connection as necessary. 2 Replace PRCB.

• Code: 3C10
• Description: EEPROM fault 2 (main body) The engine serial number cannot be recovered.
• Causes: Printer control board (PRCB)
• Troubleshooting Guides: 1 Check the connectors on the PRCB for proper connection and correct any faulty connection as necessary. 2 Replace PRCB.

• Code: 6751
• Description: Lamp lights on and AFE gain adjustment failure. During the AFE gain adjustment, the error occurs continuously for three times after retrying in a state that the the peek value of the output data is 64 or less.
• Causes: • Scanner unit • MFP board (MFPB)
• Troubleshooting Guides: 1 Check the connector between scanner unit-MFPB CN102 for proper connection and correct as necessary. 2 Check for possible extraneous light and correct as necessary. 3 Clean the lens, mirrors, AFE surface, and shading sheet if dirty. 4 Correct reflective mirror of the scanner if faulty, or change scanner mirror. 5 Replace the scanner unit. 6 Replace MFPB.

• Code: 6790
• Description: AFE offset adjustment error. During the offset adjustment, the offset value does not fall within the predetermined range a total of three times including retries.
• Causes: • Scanner unit • MFP board (MFPB)
• Troubleshooting Guides: 1 Check the connector between scanner unit-MFPB CN102 for proper connection and correct as necessary. 2 Check for possible extraneous light and correct as necessary. 3 Clean the lens, mirrors, AFE surface, and shading sheet if dirty. 4 Correct reflective mirror of the scanner if faulty, or change scanner mirror. 5 Replace the scanner unit. 6 Replace MFPB.

• Code: 6791
• Description: AFE register setting error There is a mismatch between the set default values of the AFE gain/offset and the gain/offset values read thereafter.
• Causes: • Scanner unit • MFP board (MFPB)
• Troubleshooting Guides: 1 Check the connector between scanner unit-MFPB CN102 for proper connection and correct as necessary. 2 Check for possible extraneous light and correct as necessary. 3 Clean the lens, mirrors, AFE surface, and shading sheet if dirty. 4 Correct reflective mirror of the scanner if faulty, or change scanner mirror. 5 Replace the scanner unit. 6 Replace MFPB.

• Code: 6792
• Description: White reference plate search error The black/white edge on the shading plate cannot be detected during initialization.
• Causes: • Scanner unit • MFP board (MFPB)
• Troubleshooting Guides: 1 Check the connector between scanner unit-MFPB CN102 for proper connection and correct as necessary. 2 Check for possible extraneous light and correct as necessary. 3 Clean the lens, mirrors, AFE surface, and shading sheet if dirty. 4 Correct reflective mirror of the scanner if faulty, or change scanner mirror. 5 Replace the scanner unit. 6 Replace MFPB.

• Code: 6793
• Description: Scanner communication error A communication error of some sort occurs between the controller and the scanner.
• Causes: • Scanner unit • MFP board (MFPB)
• Troubleshooting Guides: 1 Check the connector between scanner unit-MFPB CN102 for proper connection and correct as necessary. 2 Check for possible extraneous light and correct as necessary. 3 Clean the lens, mirrors, AFE surface, and shading sheet if dirty. 4 Correct reflective mirror of the scanner if faulty, or change scanner mirror. 5 Replace the scanner unit. 6 Replace MFPB.

• Code: 9401
• Description: Exposure lamp lighting failure detected. The intensity of the lamp is not stabilized within a predetermined period of time during the lamp stabilization check process in a lamp warm-up cycle.
• Causes: • Scanner unit • MFP board (MFPB)
• Troubleshooting Guides: 1 Check the connector between scanner unit-MFPB CN102 for proper connection and correct as necessary. 2 Check for possible extraneous light and correct as necessary. 3 Clean the lens, mirrors, AEF surface, and shading sheet if dirty. 4 Correct reflective mirror of the scanner if faulty, or change scanner mirror. 5 Replace the scanner unit. 6 Replace MFPB.

• Code: C151
• Description: ROM contents error upon startup (MSC) A fault is detected in a sequence of ROM contents check of the MFPB during starting.
• Causes: MFP board (MFPB)
• Troubleshooting Guides: 1 Check the ROM version. 2 Rewrite the firmware. 3 Replace MFPB.

• Code: C161
• Description: Firmware update error A firmware updating sequence is not normally terminated.
• Causes: MFP board (MFPB)
• Troubleshooting Guides: 1 Check the cable used for updating the firmware for proper connection and correct any faulty connection as necessary. 2 Check the firmware updating file; if the file is not correct, update the firmware again. 3 Check the firmware updating procedure; if the procedure is not correct, update the firmware again. 4 Update the firmware again. 5 Check the MFPB connector for proper connection and correct any faulty connection as necessary. 6 Replace MFPB.

Solve Konica-Minolta bizhub C3110 Error codes

• Code: D004
• Description: Hard disk access error (connection failure) Unable to communicate between the hard disk and MFP board (MFPB).
• Causes: • MFP board (MFPB) • HDD (HDD)
• Troubleshooting Guides: 1 Check the connector between hard disk-MFPB CN5, CN13 for proper connection and correct as necessary. 2 Reinstall the hard disk. 3 Replace the hard disk. 4 Replace MFPB.

• Code: D091
• Description: Hard disk full error The area made available as a user area is full during access to the hard disk.
• Causes: • MFP board (MFPB) • HDD (HDD)
• Troubleshooting Guides: 1 Set [Admin Settings] -> [Printer Settings] -> [HOLD JOB TIMEOUT] to [Disable]. 2 Check the connector between hard disk-MFPB CN5, CN13 for proper connection and correct as necessary. 3 Format the hard disk. 4 Replace the hard disk. 5 Replace MFPB.

• Code: D092
• Description: No hard disk (found during a disk check) The hard disk is not mounted.
• Causes: HDD
• Troubleshooting Guides: 1 Install and format the hard disk.

• Code: D093
• Description: Wrong hard disk (found during a disk check) • A hard disk intended for another model is mounted. • The hard disk capacity is short.
• Causes: HDD
• Troubleshooting Guides: 1 Replace the hard disk. 2 Format hard disk.

• Code: D094
• Description: Hard disk check disk error When the power switch ON, the hard disk fails to be checked.
• Causes: HDD
• Troubleshooting Guides: 1 Replace the hard disk. 2 Format the hard disk.

• Code: D095
• Description: Hard disk recovered (requiring reboot) When the power switch ON, the hard disk fails to be recovered.
• Causes: HDD
• Troubleshooting Guides: 1 Turn OFF/ON the power switch. 2 Replace the hard disk. 3 Format the hard disk.

• Code: D096
• Description: Hard disk access fault When the power switch ON, the hard disk fails to be access.
• Causes: HDD
• Troubleshooting Guides: 1 Replace the hard disk. 2 Format the hard disk.

• Code: D0A2
• Description: No SSD board (found during a disk check) The SSD board is not mounted.
• Causes: SSD board (SSDB)
• Troubleshooting Guides: 1 Install the SSDB. 2 Using [Admin Settings] -> [Security Settings] -> [SSD Settings] -> [SSD Format], format the SSD.

• Code: D0A3
• Description: Wrong SSD board (found during a disk check) • A SSD board intended for another model is mounted. • The SSD board capacity is short.
• Causes: SSD board (SSDB)
• Troubleshooting Guides: 1 Replace SSDB. 2 Using [Admin Settings] -> [Security Settings] -> [SSD Settings] -> [SSD Format], format the SSD.

• Code: D0A4
• Description: SSD board check disk error When the power switch ON, the SSD board fails to be checked.
• Causes: SSD board (SSDB)
• Troubleshooting Guides: 1 Using [Admin Settings] -> [Security Settings] -> [SSD Settings] -> [SSD Format], format the SSD. 2 Replace SSDB. 3 Using [Admin Settings] -> [Security Settings] -> [SSD Settings] -> [SSD Format], format the SSD.

• Code: D0A5
• Description: SSD board recovered (requiring reboot) When the power switch ON, the SSD board fails to be recovered.
• Causes: SSD board (SSDB)
• Troubleshooting Guides: 1 Turn OFF/ON the power switch. 2 Replace SSDB. 3 Using [Admin Settings] -> [Security Settings] -> [SSD Settings] -> [SSD Format], format the SSD.

• Code: D0A6
• Description: SSD board access fault When the power switch ON, the SSD board fails to be access.
• Causes: SSD board (SSDB)
• Troubleshooting Guides: 1 Replace SSDB. 2 Using [Admin Settings] -> [Security Settings] -> [SSD Settings] -> [SSD Format], format the SSD.

• Code: D3A2
• Description: Counter error A write error occurs in the counter area.
• Causes: MFP board (MFPB)
• Troubleshooting Guides: 1 Check the MFPB for its mounting condition and correct any faulty condition. 2 Replace MFPB 3 If the same trouble code persists after the abovementioned procedures, the EEPROM is probably damaged.

• Code: D3F1
• Description: Successful completion of counter backup The counter backup process is completed successfully.
• Causes:
• Troubleshooting Guides: 1 This code is displayed when the counter backup process is completed successfully. When this code is displayed, turn OFF/ON the power switch and then perform the given steps. G.3.10 MFP board (MFPB)

• Code: D3F2
• Description: Write error of the counter area (NVRAM) An error occurs in the counter area when writing to the BootFlash.
• Causes: MFP board (MFPB)
• Troubleshooting Guides: 1 Turn OFF/ON the power switch. 2 Check the MFPB for its mounting condition and correct any faulty condition. 3 Replace MFPB

• Code: D3F3
• Description: Write error of the counter area (SSD) An error occurs in the counter area when writing to the EEPROM.
• Causes: MFP board (MFPB)
• Troubleshooting Guides: 1 Turn OFF/ON the power switch. 2 Check the MFPB for its mounting condition and correct any faulty condition. 3 Replace MFPB 4 If the same trouble code persists after the abovementioned procedures, replace the EEPROM with the one has been installed on the new board.

• Code: D3F4
• Description: Copy write error of the counter area An error occurs in the counter area when restoring from the EEPROM to the BootFlash.
• Causes: MFP board (MFPB)
• Troubleshooting Guides: 1 Turn OFF/ON the power switch. 2 Check the MFPB for its mounting condition and correct any faulty condition. 3 Replace MFPB 4 If the same trouble code persists after the abovementioned procedures, replace the EEPROM with the one has been installed on the new board.

• Code: D501
• Description: FLASH error The SSD board (SSDB) develops a fault.
• Causes: • MFP board (MFPB) • SSD board (SSDB)
• Troubleshooting Guides: 1 Check the SSD for its mounting condition and correct any faulty condition. 2 Replace MFPB.

– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here






– Get more information about Epson XP 15000 troubleshooting, click here
– Buy cheap key of Epson WIC Reset Tool, CLICK HERE
– Key Epson Adjustment Program, CLICK HERE
– Download Epson printer driver, CLICK HERE
– Download Epson XP-6100 Driver, Firmware and Manuals, CLICK HERE

Contact us to get support with Konica-Minolta bizhub C3110 Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.