[SOLVED] Quick fix Konica-Minolta C300 list error codes

[SOLVED] Quick fix Konica-Minolta C300 list error codes

– Compatible Printer model: Konica-Minolta bizhub C300
– Konica-Minolta bizhub C300 Error Codes with quick guides:

• Code: C0210
• Description: LCT ascent motion failure
• Troubleshooting Guides:

• Code: C0211
• Description: Manual tray rise descent error
  • The bypass lift-up sensor is not blocked even when the tray 2 vertical transport motor has turned for a given number of pulses after the sequence to move the paper lifting plate from the standby position to the feed position was started. • The bypass lift-up sensor is not unblocked even when the tray 2 vertical transport motor has turned for a given number of pulses after the sequence to move the paper lifting plate from the feed position to the standby position was started.
• Troubleshooting Guides: 1 Check the M1 connector for proper connection and correct as necessary. 2 Check the connector of M1 for proper drive coupling and correct as necessary. 3 PC14 I/O check, sensor check MFPB CNTRY1-10 (ON) C-9. 4 M1 operation check MFPB CNDM1-5 (REM) MFPB CNDM1-8 (LOCK) L-2. 5 Change MFPB.

• Code: C0212
• Description: LCT ejection failure
• Troubleshooting Guides:

• Code: C0213
• Description: LCT shift gate malfunction
• Troubleshooting Guides:

• Code: C0214
• Description: LCT shifting failure
• Troubleshooting Guides:

• Code: C0215
• Description: LCT shift motor malfunction
• Troubleshooting Guides:

• Code: C0001
• Description: LCT connection failed
• Troubleshooting Guides:

• Code: C0102
• Description: LCT vertical transport motor malfunction
• Troubleshooting Guides:

• Code: C0204
• Description: Tray 2 elevator failure
  • The lift-up sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.
• Troubleshooting Guides: 1 Check the M3-PC connector for proper connection and correct as necessary. 2 Check the connector of M3-PC for proper drive coupling and correct as necessary. 3 PC7-PC I/O check, sensor check PCCB PJ6PCCB-3 (ON) S-24. 4 M3-PC operation check PCCB PJ4PCCB-4 to 5 M-27. 5 Change PCCB

• Code: C0206
• Description: Tray 3 elevator failure
• Troubleshooting Guides:

• Code: C0208
• Description: Tray 4 elevator failure
• Troubleshooting Guides:

• Code: C0209
• Description: LCT elevator motor malfunction (elevator malfunction)
• Troubleshooting Guides:

• Code: C0210
• Description: LCT ascent motion failure
• Troubleshooting Guides:

• Code: C0211
• Description: Manual tray rise descent error
  • The bypass lift-up sensor is not blocked even when the tray 2 vertical transport motor has turned for a given number of pulses after the sequence to move the paper lifting plate from the standby position to the feed position was started. • The bypass lift-up sensor is not unblocked even when the tray 2 vertical transport motor has turned for a given number of pulses after the sequence to move the paper lifting plate from the feed position to the standby position was started.
• Troubleshooting Guides: 1 Check the M1 connector for proper connection and correct as necessary. 2 Check the connector of M1 for proper drive coupling and correct as necessary. 3 PC14 I/O check, sensor check MFPB CNTRY1-10 (ON) C-9. 4 M1 operation check MFPB CNDM1-5 (REM) MFPB CNDM1-8 (LOCK) L-2. 5 Change MFPB.

• Code: C0212
• Description: LCT ejection failure
• Troubleshooting Guides:

• Code: C0213
• Description: LCT shift gate malfunction
• Troubleshooting Guides:

• Code: C0214
• Description: LCT shifting failure
• Troubleshooting Guides:

• Code: C0215
• Description: LCT shift motor malfunction
• Troubleshooting Guides:

• Code: C11B2
• Description: Finishing option stapling mechanism malfunction 1
• Troubleshooting Guides:

• Code: C11B5
• Description: Side staple 1 drive failure
• Troubleshooting Guides:

• Code: C11B6
• Description: Side staple 2 drive failure
• Troubleshooting Guides:

• Code: C11C0
• Description: Punch motor malfunction
• Troubleshooting Guides:

• Code: C11D0
• Description: Crease motor drive failure
• Troubleshooting Guides:

• Code: C1301
• Description: Finishing option cooling fan motor failure
• Troubleshooting Guides:

• Code: C2556
• Description: Abnormally high toner density detected yellow TCR sensor
  • TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 12 % or more for a given number of times consecutively.
• Troubleshooting Guides: 1 Clean the TCR sensor window on the underside of the imaging unit if dirty 2 Reinstall imaging unit. 3 Change imaging unit. 4 Change MFPB. 5 Change PRCB

• Code: C2557
• Description: Abnormally low toner density detected black TCR sensor
  • TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 4 % or less for a given number of times consecutively.
• Troubleshooting Guides: 1 Perform image troubleshooting procedure if image density is low. 2 Clean the TCR sensor window on the underside of the imaging unit if dirty 3 M7 operation check MFPB CNDM3-10 to 13 C-21 4 Reinstall Imaging unit. 5 Change imaging unit /K. 6 Change MFPB. 7 Change PRCB.

• Code: C2558
• Description: Abnormally high toner density detected black TCR sensor
  • TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 12 % or more for a given number of times consecutively.
• Troubleshooting Guides: 1 Correct the TCR connection on the underside of the imaging unit if faulty. 2 Reinstall imaging unit. 3 Change imaging unit. 4 Change MFPB. 5 Change PRCB.

• Code: C2559
• Description: Cyan TCR sensor adjustment failure
  • TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value.
• Troubleshooting Guides: 1 Clean the TCR sensor window on the underside of the imaging unit if dirty 2 M6, M7 operation check MFPB CNDM2-10 to 13 (M6) MFPB CNDM3-10 to 13 (M7) C-20 C-21. 3 Reinstall imaging unit. 4 Change imaging unit. 5 Change MFPB. 6 Change PRCB.

• Code: C255A
• Description: Magenta TCR sensor adjustment failure
• Troubleshooting Guides: 1 Clean the TCR sensor window on the underside of the imaging unit if dirty 2 M6, M7 operation check MFPB CNDM2-10 to 13 (M6) MFPB CNDM3-10 to 13 (M7) C-20 C-21. 3 Reinstall imaging unit. 4 Change imaging unit. 5 Change MFPB. 6 Change PRCB.

• Code: C255B
• Description: Yellow TCR sensor adjustment failure
• Troubleshooting Guides: 1 Clean the TCR sensor window on the underside of the imaging unit if dirty 2 M6, M7 operation check MFPB CNDM2-10 to 13 (M6) MFPB CNDM3-10 to 13 (M7) C-20 C-21. 3 Reinstall imaging unit. 4 Change imaging unit. 5 Change MFPB. 6 Change PRCB.

• Code: C255C
• Description: Black TCR sensor adjustment failure
• Troubleshooting Guides: 1 Clean or correct each contact of the imaging unit if faulty. 2 M7 operation check MFPB CNDM3-10 to 13 C-21. 3 Reinstall imaging unit /K. 4 Change imaging unit /K. 5 Change MFPB. 6 Change PRCB.

• Code: C2651
• Description: Cyan imaging unit EEPROM access error
  • The re-written data, which has been read out, checked and founded as error, is read out again and found as error.
  • The error was found when reading out the counter value.
• Troubleshooting Guides: 1 Clean the connection between the imaging unit and the machine if dirty 2 Reinstall imaging unit. 3 Change imaging unit. 4 Change MFPB.

• Code: C2652
• Description: Magenta imaging unit EEPROM access error
• Troubleshooting Guides: 1 Clean the connection between the imaging unit and the machine if dirty 2 Reinstall imaging unit. 3 Change imaging unit. 4 Change MFPB.

• Code: C2653
• Description: Yellow imaging unit EEPROM access error
• Troubleshooting Guides: 1 Clean the connection between the imaging unit and the machine if dirty 2 Reinstall imaging unit. 3 Change imaging unit. 4 Change MFPB.

• Code: C2654
• Description: Black imaging unit EEPROM access error
• Troubleshooting Guides: 1 Clean the connection between the imaging unit and the machine if dirty 2 Reinstall imaging unit. 3 Change imaging unit. 4 Change MFPB.

• Code: C2A01
• Description: Cyan toner cartridge EEPROM access error
  • The re-written data, which has been read out, checked and founded as error, is read out again and found as error.
  • The error was found when reading out the counter value.
• Troubleshooting Guides: 1 Clean the connection between the toner cartridge and the machine if dirty 2 Reinstall toner cartridge – – 3 Check the harness for proper connection and correct as necessary. 4 Change toner cartridge. 5 Change MFPB.

Solve Konica-Minolta bizhub C300 Error codes

• Code: C6103
• Description: Slider over run
  • The scanner home sensor detects the scanner at its home position during a period of time that begins with the time when a prescan command and a scan preparation command are executed and ends when a home return command is executed.
• Troubleshooting Guides: 1 Correct or change the scanner drive (cable, pulley, gear, belt) if it is faulty. 2 Correct the scanner motor set screw if loose. 3 Adjust [Image Position Leading Edge] and [Feed Direction Adjustment]. 4 Check the PC201, M201, SCADB and IPB connector for proper connection and correct as necessary. 5 PC201 I/O check, sensor check IPB PJ11IPB-8 (ON) T-13 6 M201 operation check SCADB PJ3SCADB-1 (REM) SCADB PJ3SCADB-3 (LOCK) Y-7. 7 Change SCADB. 8 Change IPB.

• Code: C6301
• Description: Scanner cooling fan motor’s failure to turn
  • The fan lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
• Troubleshooting Guides: 1 Check the connector of motor for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 M202 operation check IPB PJ81IPB-2 (REM) IPB PJ81IPB-3 (LOCK) U-10. 4 Change IPB. 5 Change MFPB.

• Code: C6302
• Description: Exposure lamp cooling fan motor’s failure to turn
  • The fan lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
• Troubleshooting Guides: 1 Check the connector of motor for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 M203 operation check IPB PJ82IPB-2 (REM) IPB PJ82IPB-3 (LOCK) U-11. 4 Change IPB. 5 Change MFPB.

• Code: C6704
• Description: Image input time out
  • Image data is not input from the image processing board (IPB) to the printer control board (PRCB).
• Troubleshooting Guides: 1 Select [Service Mode] – [State Confirmation] – [Memory/HDD Adj.] – [Memory Bus Check] – [Scanner-Memory], and conduct the memory bus function. 2 Check the connectors between IPB and PRCB for proper connection and correct as necessary. 3 Change PRCB. 4 Change IPB.

• Code: C6751
• Description: CCD clamp/gain adjustment failure
  • The adjustment value is 0 or 255 during a CCD clamp adjustment. • The peak value of the output data is 64 or less during a CCD gain adjustment
• Troubleshooting Guides: 1 Correct the harness connection between CCDB and IPB if faulty. 2 Check for possible extraneous light and correct as necessary. 3 Clean the lens, mirrors, CCD surface, and shading sheet if dirty 4 Correct reflective mirror of the scanner if faulty, or change scanner. 5 Change CCD sensor unit. 6 Change IPB.

• Code: C8101
• Description: Pressure/retraction mechanism failure before image reading See DF-608
• Troubleshooting Guides:

• Code: CF001 … CFF15
• Description: MFP Control Board error
• Troubleshooting Guides:

• Code: CF001 … CFF15
• Description: MFP Control Board error
• Troubleshooting Guides:

• Code: CF001 … CFF15
• Description: MFP Control Board error
• Troubleshooting Guides:

• Code: CF001 … CFF15
• Description: MFP Control Board error
• Troubleshooting Guides:

• Code: CF001 … CFF15
• Description: MFP Control Board error
• Troubleshooting Guides:

• Code: CF001 … CFF15
• Description: MFP Control Board error
• Troubleshooting Guides:

• Code: CF001 … CFF15
• Description: MFP Control Board error
• Troubleshooting Guides:

• Code: CF001 … CFF15
• Description: MFP Control Board error
• Troubleshooting Guides:

– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here






– Get more information about Epson XP 15000 troubleshooting, click here
– Buy cheap key of Epson WIC Reset Tool, CLICK HERE
– Key Epson Adjustment Program, CLICK HERE
– Download Epson printer driver, CLICK HERE
– Download Epson XP-6100 Driver, Firmware and Manuals, CLICK HERE

Contact us to get support with Konica-Minolta bizhub C300 Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.