[SOLVED] Quick fix Konica-Minolta 5450 list error codes

[SOLVED] Quick fix Konica-Minolta 5450 list error codes

– Compatible Printer model: Konica-Minolta Magicolor 5450
– Konica-Minolta Magicolor 5450 Error Codes with quick guides:

• Code: 0010
• Display: P MOTOR COLOR
• Description: Color PC Drum Motor malfunction
  • The Color PC Drum Motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The Motor Lock signal remains HIGH for a given period of consecutive time while the Color PC Drum Motor is being rotated.
• Troubleshooting Guides: 1 Check the M2 connector for proper connection and correct as necessary. 2 Check M2 for proper drive coupling and correct as necessary. 3 Check the PWB-A connector for proper connection and correct as necessary. 4 M2 operation check PWB-A PJ14A-8 (LOCK) PWB-A PJ14A-5 (REM) 11-B. 5 Change PWB-A. 6 Change LV.

• Code: 0017
• Display: P MOTOR BLACK
• Description: Intermediate Transport Motor malfunction
  • The Intermediate Transport Motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The Motor Lock signal remains HIGH for a given period of consecutive time while the Intermediate Transport Motor is being rotated.
• Troubleshooting Guides: 1 Check the M3 connector for proper connection and correct as necessary. 2 Check M3 for proper drive coupling and correct as necessary. 3 Check the PWB-A connector for proper connection and correct as necessary. 4 M3 operation check PWB-A PJ27A-8 (LOCK) PWB-A PJ27A-5 (REM) 2-I. 5 Change PWB-A. 6 Change LV.

• Code: 0018
• Display: D MOTOR BLACK
• Description: Developing Motor/K malfunction
  • The Developing Motor/K does not rotate evenly even after the lapse of a given period of time while it is being started. • The Motor Lock signal remains HIGH for a given period of consecutive time while the Developing Motor/K is being rotated.
• Troubleshooting Guides: 1 Check the M5 connector for proper connection and correct as necessary. 2 Check M5 for proper drive coupling and correct as necessary. 3 Check the PWB-A connector for proper connection and correct as necessary. 4 M5 operation check PWB-A PJ33A-8 (LOCK) PWB-A PJ33A-5 (REM) 11-C. 5 Change PWB-A. 6 Change LV.

• Code: 001B
• Display: D MOTOR COLOR
• Description: Developing Motor/ Y,M,C malfunction
  • The Developing Motor/Y,M,C does not rotate evenly even after the lapse of a given period of time while it is being started. • The Motor Lock signal remains HIGH for a given period of consecutive time while the Developing Motor/Y,M,C is being rotated.
• Troubleshooting Guides: 1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the PWB-A connector for proper connection and correct as necessary. 4 M1 operation check PWB-A PJ8A-8 (LOCK) PWB-A PJ8A-5 (REM) 11-A. 5 Change PWB-A. 6 Change LV.

• Code: 0046
• Display: FUSER FAN
• Description: Fusing Cooling Fan Motor malfunction
  • The Motor Lock signal remains HIGH for a given period of consecutive time while the Fusing Cooling Fan Motor is being rotated.
• Troubleshooting Guides: 1 Check the M11 connector for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 M11 operation check PWB-A PJ21A-3 (LOCK) PWB-A PJ21A-1 (ON) 2-F-E 4 Change PWB-A.

• Code: 004C
• Display: OZONE FAN
• Description: Ozone Ventilation Fan Motor malfunction
  • The Motor Lock signal remains HIGH for a given period of consecutive time while the Ozone Ventilation Fan Motor is being rotated.
• Troubleshooting Guides: 1 Check the M12 connector for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 M12 operation check PWB-A PJ6A-7 (LOCK) PWB-A PJ6A-5 (ON) 14-I. 4 Change PWB-A.

• Code: 004E
• Display: POWER FAN
• Description: LV Cooling Fan Motor malfunction
  • The Motor Lock signal remains HIGH for a given period of consecutive time while the LV Cooling Fan Motor is being rotated.
• Troubleshooting Guides: 1 Check the M10 connector for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 M10 operation check PWB-A PJ9A-3 (LOCK) PWB-A PJ9A-1 (ON) 12-J. 4 Change PWB-A.

• Code: 0060
• Display: FUSER MOTOR
• Description: Fusing Motor malfunction
  • The Fusing Motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The Motor Lock signal remains HIGH for a given period of consecutive time while the Fusing Motor is being rotated.
• Troubleshooting Guides: 1 Check the M4 connector for proper connection and correct as necessary. 2 Check the Fusing Unit driving mechanism for possible overload and correct as necessary. 3 Check the PWB-A connector for proper connection and correct as necessary. 4 M4 operation check PWB-A PJ19A-8 (LOCK) PWB-A PJ19A-5 (REM) 2-B-C 5 Change PWB-A.

• Code: 0094
• Display: XFER DETACH 2
• Description: 2nd image transfer pressure / retraction failure
  • The Retraction Position Sensor/2nd Image Transfer is not activated (retracted position) within a given period of time after the retraction sequence of the 2nd Transfer Roller has been started. • The Retraction Position Sensor/2nd Image Transfer is not deactivated (pressed position) within a given period of time after the pressure sequence of the 2nd Transfer Roller has been started.
• Troubleshooting Guides: 1 Check the M3 connector for proper connection and correct as necessary. 2 Check the CL5 connector for proper connection and correct as necessary. 3 Check M3 for proper drive coupling and correct as necessary. 4 Check CL5 for proper drive coupling and correct as necessary. 5 Check the PWB-A connector for proper connection and correct as necessary. 6 PC10 sensor check PWB-A PJ10A-6 (ON) 7-A. 7 CL5 operation check PWB-A PJ10A-8 (ON) 7-A. 8 M3 operation check PWB-A PJ27A-8 (LOCK) PWB-A PJ27A-5 (REM) 2-I. 9 Change PWB-A.

• Code: 0096
• Display: XFER DETACH 1
• Description: 1st image transfer pressure / retraction failure
  • The Retraction Position Sensor/1st Image Transfer is not activated (retracted position) within a given period of time after the Intermediate Transport Motor has started rotating. • The Retraction Position Sensor/1st Image Transfer is not deactivated (pressed position) within a given period of time after the Intermediate Transport Motor has started rotating.
• Troubleshooting Guides: 1 Check the M3 connector for proper connection and correct as necessary. 2 Check the CL4 connector for proper connection and correct as necessary. 3 Check M3 for proper drive coupling and correct as necessary. 4 Check CL4 for proper drive coupling and correct as necessary. 5 Check the PWB-A connector for proper connection and correct as necessary. 6 PC9 sensor check PWB-A PJ7A-13 (ON) 7-B-C. 7 CL4 operation check PWB-A PJ7A-10 (ON) 7-B. 8 M3 operation check PWB-A PJ27A-8 (LOCK) PWB-A PJ27A-5 (REM) 2-I. 9 Change PWB-A.

• Code: 0300
• Display: POLYGON MOTOR
• Description: Polygon Motor malfunction
  • The Polygon Motor does not rotate evenly even after the lapse of a given period of time after it has been started. • The Motor Lock signal remains HIGH for a given period of consecutive time while the Polygon Motor is being rotated.
• Troubleshooting Guides: 1 Check the cable and connector for proper connection and correct as necessary. 2 Change PH Unit. 3 Change PWB-A.

• Code: 0310
• Display: LASER ERROR
• Description: Laser malfunction
  • The SOS signal is not detected within a given period of time after the output of the laser has been started.
• Troubleshooting Guides: 1 Check the cable and connector for proper connection and correct as necessary. 2 Change PH Unit. 3 Change PWB-A.

• Code: 0500
• Display: FUSER ERROR
• Description: Heating Roller warm-up failure
  • The Heating Roller Thermistor does not detect the specified temperature and the warm-up cycle is not completed even after the lapse of a given period of time after the cycle has been started.
• Troubleshooting Guides: 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, LV, and PWB-A for proper connection and correct as necessary. 3 Change Fusing Unit. 4 Change PWB-A. 5 Change LV.

• Code: 0501
• Display: FUSER ERROR
• Description: Fusing Pressure Roller warm-up failure
  • The Fusing Pressure Roller Thermistor does not detect the specified temperature and the warm-up cycle is not completed even after the lapse of a given period of time after the cycle has been started.
• Troubleshooting Guides: 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, LV, and PWB-A for proper connection and correct as necessary. 3 Change Fusing Unit. 4 Change PWB-A. 5 Change LV.

• Code: 0510
• Display: FUSER ERROR
• Description: Abnormally low Heating Roller temperature
  • The temperature detected by the Heating Roller Thermistor remains lower than the specified value for a given period of time or longer.
• Troubleshooting Guides: 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, LV, and PWB-A for proper connection and correct as necessary. 3 Change Fusing Unit. 4 Change PWB-A. 5 Change LV.

• Code: 0511
• Display: FUSER ERROR
• Description: Abnormally low Fusing Pressure Roller temperature
  • The temperature detected by the Fusing Pressure Roller Thermistor remains lower than the specified value for a given period of time or longer.
• Troubleshooting Guides: 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, LV, and PWB-A for proper connection and correct as necessary. 3 Change Fusing Unit. 4 Change PWB-A. 5 Change LV.

• Code: 0520
• Display: FUSER ERROR
• Description: Abnormally high Heating Roller temperature
  • The temperature detected by the Heating Roller Thermistor remains higher than the specified value for a given period of time or longer.
• Troubleshooting Guides: 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, LV, and PWB-A for proper connection and correct as necessary. 3 Change Fusing Unit. 4 Change PWB-A. 5 Change LV.

• Code: 0521
• Display: FUSER ERROR
• Description: Abnormally high Fusing Pressure Roller temperature
  • The temperature detected by the Fusing Pressure Roller Thermistor remains higher than the specified value for a given period of time or longer.
• Troubleshooting Guides: 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, LV, and PWB-A for proper connection and correct as necessary. 3 Change Fusing Unit. 4 Change PWB-A. 5 Change LV.

• Code: 13D0
• Display: EEPROM1
• Description: Parameter Chip failure
  • Data, which has been written, is read, checked, and found faulty; rewriting of the data is then executed and the data is checked to be found faulty during re-reading. • A count value is found faulty during reading. • Parameter Chip is detected to be not mounted during initial mounting detecting sequence. • Found to be access failure.
• Troubleshooting Guides: 1 Unplug the power cord and plug it in, then turn OFF and ON the Power Switch. 2 Check Parameter Chip (IC15) on PWB-A for proper connection and correct as necessary. 3 Change PWB-A. 4 Change Parameter Chip.

• Code: 13E2
• Display: FLASH WRITE
• Description: Flash ROM write error
  • Flash ROM writing is found faulty during a check.
• Troubleshooting Guides: 1 Change PWB-A.

• Code: 13E3
• Display: FLASH DEVICE
• Description: Flash ROM device fault • An erase error occurs during erasing of data in Flash ROM.
• Troubleshooting Guides: 1 Change PWB-A.

• Code: C002
• Display: RAM
• Description: RAM error at Standard Memory
  • RAM error at Standard Memory is detected during printer start-up.
• Troubleshooting Guides: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check connection state of the extension memory and correct as necessary. 3 Check the PWB-P connector for proper connection and correct as necessary. 4 Changethe extension memory. 5 Change PWB-P.

• Code: C003
• Display: ERROR
• Description: RAM error at Extension Memory
  • RAM error at Extension Memory is detected during printer start-up.
• Troubleshooting Guides: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check connection state of the extension memory and correct as necessary. 3 Check the PWB-P connector for proper connection and correct as necessary. 4 Changethe extension memory. 5 Change PWB-P.

• Code: C013
• Display: H/W ADDRESS
• Description: MAC address error
  • Invalid Mac address is detected during printer start-up.
• Troubleshooting Guides: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 Change PWB-P.A.

• Code: C015
• Display: BOOT ROM
• Description: Boot ROM error
  • Boot ROM error is detected during printer startup.
• Troubleshooting Guides: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 Change PWB-P.A.

• Code: C022
• Display: NVRAM ERROR
• Description: NVRAM access error
  • Correct access to NVRAM is failed during the printer starting.
• Troubleshooting Guides: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 Change PWB-P.A.

• Code: C025
• Display: NVRAM ERROR
• Description: NVRAM access error
  • Lead error of destination setting file is detected during the printer starting.
• Troubleshooting Guides: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change PWB-P.

• Code: C026
• Display: CONTROLLER ROM
• Description: Controller ROM error
  • Flash ROM access error is detected during the printer starting.
• Troubleshooting Guides: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change PWB-P.

• Code: C027
• Display: CONTROLLER ROM
• Description: Controller ROM error
  • Final check sum error is detected during the printer starting.
• Troubleshooting Guides: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change PWB-P.

• Code: C050
• Display: HDD ERROR
• Description: HDD access error
  • When correct access to the hard disc unit is failed during access.
• Troubleshooting Guides: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the HDD connector for proper connection and correct as necessary. 3 Check the PWB-P connector for proper connection and correct as necessary. 4 Change HDD. 5 Change PWB-P

• Code: C051
• Display: HDD DISK FULL
• Description: HDD full error
  • Range for user space is full during access to the Hard Disk unit.
• Troubleshooting Guides: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Delete the job hold in “PROOF/PRINT MENU” to increase the available range for user space. 3 Check the HDD connector for proper connection and correct as necessary. 4 Format HDD with SYS DEFAULT MENU/HDD FORMAT. 5 Change HDD.

• Code: C060
• Display: UPDATE ERROR
• Description: Firmware update error
  • Firmware update fails to complete correctly during update.
• Troubleshooting Guides: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the cable that has been used for update of the firmware for proper connection and correct as necessary. 3 Update the firmware again. 4 Check the PWB-P connector for proper connection and correct as necessary. 5 Change PWB-P

• Code: C061
• Display: HOLD JOB ERROR DUPLEX
• Description: Hold job error/No Duplex unit
  • The Duplex Option is not installed, but it is required for printing the job held in the HDD.
• Troubleshooting Guides: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Return to the same state as the device configuration when job was held. 3 Check the options that are mounted on the printer for proper connection and correct as necessary. 4 Check the PWB-A connector for proper connection and correct as necessary. 5 Delete the job hold in PROOF/PRINT MENU.

• Code: C062
• Display: HOLD JOB ERROR TRAY 3
• Description: Hold job error/No Tray 3
  • Tray 3 is not set when the tray 3 is required for printing of the job hold in HDD.
• Troubleshooting Guides: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Return to the same state as the device configuration when job was held. 3 Check the options that are mounted on the printer for proper connection and correct as necessary. 4 Check the PWB-A connector for proper connection and correct as necessary. 5 Delete the job hold in PROOF/PRINT MENU.

• Code: C063
• Display: HOLD JOB ERROR TRAY 4
• Description: Hold job error/No Tray 4
  • Tray 4 is not set when the tray 4 is required for printing of the job hold in HDD.
• Troubleshooting Guides: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Return to the same state as the device configuration when job was held. 3 Check the options that are mounted on the printer for proper connection and correct as necessary. 4 Check the PWB-A connector for proper connection and correct as necessary. 5 Delete the job hold in PROOF/PRINT MENU.

• Code: C064
• Display: HOLD JOB ERROR MEMORY
• Description: Hold job error/No Memory
  • Expansion memory is not set when the expansion memory is required for printing of the job hold in HDD.
• Troubleshooting Guides: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Return to the same state as the device configuration when job was held. 3 Check the options that are mounted on the printer for proper connection and correct as necessary. 4 Check the PWB-A connector for proper connection and correct as necessary. 5 Delete the job hold in PROOF/PRINT MENU.

• Code: FFFF
• Display: I/F COMM ERROR
• Description: Interface Communication error
  • Correct communication is failed when receiving/ sending the command between PWB-A and PWB-P.
• Troubleshooting Guides: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary 3 Check the PWB-A connector for proper connection and correct as necessary. 4 Change PWB-A.

Solve Konica-Minolta Magicolor 5450 Error codes

– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here






– Get more information about Epson XP 15000 troubleshooting, click here
– Buy cheap key of Epson WIC Reset Tool, CLICK HERE
– Key Epson Adjustment Program, CLICK HERE
– Download Epson printer driver, CLICK HERE
– Download Epson XP-6100 Driver, Firmware and Manuals, CLICK HERE

Contact us to get support with Konica-Minolta Magicolor 5450 Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.