[SOLVED] Quick fix Konica-Minolta 40P list error codes

[SOLVED] Quick fix Konica-Minolta 40P list error codes

– Compatible Printer model: Konica-Minolta bizhub 40P
– Konica-Minolta bizhub 40P Error Codes with quick guides:

• Code: 0017
• Display: MAIN MOTOR
• Description: Main motor malfunction
  – The speed of the main motor (M1) does not reach the predetermined value.
• Causes: Main motor Print control board (PRCB)
• Troubleshooting Guides: 1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary . 4 M1 operation check DCPU P/J43-5 (ON) P.183 5 Change M1 6 Change PRCB

• Code: 0046
• Display: FUSER FAN
• Description: Fusing cooling fan motor malfunction
  – The fusing cooling fan motor (FM1) develops a rotation failure or other malfunction.
• Causes: Fusing cooling fan motor (FM1) Print control board (PRCB)
• Troubleshooting Guides: 1 Check the FM1 connector for proper connection and correct as necessary . 2 Check the fan for possible overload and correct as necessary. 3 FM1 operation check PRCB P/J24-16 (ALARM) P.187 4 Change FM1 5 Change PRCB .

• Code: 0300
• Display: POLYGON MOTOR
• Description: Polygon motor malfunction
  – The interval of the /BD signal is retarded relative to the predetermined value after the polygon motor has started rotating.
  – The interval of the /BD signal is retarded relative to the predetermined value after it has reached the predetermined value.
  – The laser beam output does not reach the predetermined value.
• Causes: PH unit Print control board (PRCB)
• Troubleshooting Guides: 1 Check the cable and connector for proper connection and correct as necessary. 2 Change PH unit 3 Change PRCB

• Code: 0500
• Display: FUSER ERROR
• Description: Heating roller warm-up failure
  – The fusing temperature does not reach the predetermined value after the lapse of the predetermined period of time.
  – The heater lamp remains ON for 10 sec. or more in the standby state.
  – The fusing temperature is 125 °C or less during a print cycle.
  – The fusing temperature is 220 °C or more. • An open-circuited thermistor is detected.
• Causes: Fuser unit DC power supply (DCPU) Print control board (PRCB)
• Troubleshooting Guides: 1 Check the fuser unit for correct installation (whether it is secured in position). 2 Check the fuser unit, DCPU, and PRCB for proper connection and correct as necessary. 3 Change fuser unit 4 Change PRCB 5 Change DCPU

• Code: 13E3
• Display: FLASH DEVICE
• Description: Flash ROM device fault
  – An erase error occurs during erasing of data in flash ROM.
• Causes: Print control board (PRCB) MFP board (MFPB)
• Troubleshooting Guides: 1 Check the MFPB for proper connection and correct as necessary. 2 Change PRCB 3 Change MFPB

• Code: C002
• Display: RAM ERROR
• Description: RAM error at startup (standard memory)
  – RAM error at standard memory is detected during printer start-up.
• Causes: MFP board (MFPB) DIMM (standard/option)
• Troubleshooting Guides: 1 Reboot the main body. 2 Check connection state of the standard/ expanded memory and correct as necessary. 3 Check the MFPB connector for proper connection and correct as necessary. 4 Change the standard/expanded DIMM. 5 Change MFPB

• Code: C003
• Display: RAM ERROR
• Description: RAM error at startup (expanded memory)
  – RAM error at expanded memory is detected during printer start-up.
• Causes: MFP board (MFPB) DIMM (standard/option)
• Troubleshooting Guides: 1 Reboot the main body. 2 Check connection state of the standard/ expanded memory and correct as necessary. 3 Check the MFPB connector for proper connection and correct as necessary. 4 Change the standard/expanded DIMM. 5 Change MFPB

• Code: C013
• Display: H/W ADDRESS
• Description: MAC address error at startup
  – Invalid MAC address is detected during printer start-up.
• Causes: MFP board (MFPB)
• Troubleshooting Guides: 1 Reboot the main body. 2 Check the MFPB connector for proper connection and correct as necessary. 3 Change MFPB

• Code: C015
• Display: BOOT ROM
• Description: Boot ROM error at startup
  – Boot ROM error is detected during printer startup.
• Causes: MFP board (MFPB)
• Troubleshooting Guides: 1 Reboot the main body. 2 Check the MFPB connector for proper connection and correct as necessary. 3 Change MFPB

• Code: C025
• Display: CONTROLLER ROM
• Description: Controller ROM error (Configuration information error)
  – Lead error of destination setting file is detected during the printer starting.
• Causes: MFP board (MFPB)
• Troubleshooting Guides: 1 Reboot the main body. 2 Check the MFPB connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change MFPB

• Code: C026
• Display: CONTROLLER ROM
• Description: Controller ROM error (Access error)
  – Flash ROM access error is detected during the printer starting.
• Causes: MFP board (MFPB)
• Troubleshooting Guides: 1 Reboot the main body. 2 Check the MFPB connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change MFPB

• Code: C027
• Display: CONTROLLER ROM
• Description: Controller ROM error (Data error)
  – Final check sum error is detected during the printer starting.
• Causes: MFP board (MFPB)
• Troubleshooting Guides: 1 Reboot the main body. 2 Check the MFPB connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change MFPB

• Code: C050
• Display: HDD ERROR
• Description: HDD access error
  – When correct access to the hard disk kit is failed during access.
• Causes: MFP board (MFPB) Hard disk kit (HDD)
• Troubleshooting Guides: 1 Reboot the main body. 2 Check the HDD connector for proper connection and correct as necessary. 3 Check the MFPB connector for proper connection and correct as necessary. 4 Change HDD 5 Change MFPB

• Code: C051
• Display: HDD DISK FULL
• Description: HDD full error
  – Range for user space is full during access to the hard disk kit.
• Causes: MFP board (MFPB) Hard disk kit (HDD)
• Troubleshooting Guides: 1 Reboot the main body. 2 Delete the job hold in “PROOF/PRINT MENU” to increase the available range for user space. 3 Check the HDD connector for proper connection and correct as necessary. 4 Change H

• Code: C052
• Display: CARD ERROR
• Description: Compact flash access error
  – When correct access to the compact flash card is failed during access.
• Causes: MFP board (MFPB) Compact flash card
• Troubleshooting Guides: 1 Reboot the main body. 2 Check the compact flash for proper connection and correct as necessary. 3 Check the MFPB connector for proper connection and correct as necessary. 4 Change compact flash 5 Change MFPB

• Code: C053
• Display: CARD FULL
• Description: Compact flash full error
  – Range for user space is full during access to the compact flash card.
• Causes: MFP board (MFPB) Compact flash card
• Troubleshooting Guides: 1 Reboot the main body. 2 Delete the job hold in “PROOF/PRINT MENU” to increase the available range for user space. 3 Check the compact flash for proper connection and correct as necessary. 4 Change compact flash

• Code: C054
• Display: CARD ERROR
• Description: Compact flash disconnected
  – Compact flash is disconnected
• Causes: MFP board (MFPB) Compact flash card
• Troubleshooting Guides: 1 Reboot the main body. 2 Check the compact flash for proper connection and correct as necessary. 3 Change compact flash

• Code: C060
• Display: UPDATE ERROR
• Description: Firmware update error
  – Firmware update fails to complete correctly during update.
• Causes: MFP board (MFPB)
• Troubleshooting Guides: 1 Reboot the main body. 2 Check the cable that has been used for update of the firmware for proper connection and correct as necessary. 3 Check the firmware update file and if the file is not the correct one, update the firmware again. 4 Check the firmware update procedure and if the procedure is not correct, update the firmware again. 5 Update the firmware again. 6 Check the MFPB connector for proper connection and correct as necessary. 7 Change MFPB

• Code: C071
• Display: H/W CONFIG ERROR
• Description: Hardware configuration error
  – An error occurs with hardware configuration (video clock etc.).
• Causes: MFP board (MFPB)
• Troubleshooting Guides: 1 Reboot the main body. 2 Check the MFPB connector for proper connection and correct as necessary. 3 Change MFPB

• Code: FFFF
• Display: I/F COMM ERROR
• Description: Interface Communication error
  – Correct communication is failed when receiving/ sending the command between MFPB and PRCB.
• Causes: Print control board (PRCB) MFP board (MFPB)
• Troubleshooting Guides: 1 Reboot the main body. 2 Check the PRCB connector for proper connection and correct as necessary 3 Check the MFPB connector for proper connection and correct as necessary. 4 Change MFPB 5 Change PRCB

Solve Konica-Minolta bizhub 40P Error codes

– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here






– Get more information about Epson XP 15000 troubleshooting, click here
– Buy cheap key of Epson WIC Reset Tool, CLICK HERE
– Key Epson Adjustment Program, CLICK HERE
– Download Epson printer driver, CLICK HERE
– Download Epson XP-6100 Driver, Firmware and Manuals, CLICK HERE

Contact us to get support with Konica-Minolta bizhub 40P Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.