Sharp Z70 with list Error Codes and Epson L4250 Adjustment Program

Sharp Z70 Printer with list Error Codes and Epson L4250 Adjustment Program

– Printer model: Sharp Z70
– Error codes on Sharp Z70 with details instruction fixing:

Code: E
Description: Magnification dial not set properly

Code: F
Description: Thermal fuse – exposure or fuser

Code: H
Description: Heater problem (fuser has resettable

Code: L
Description: Scan problem

Code: P
Description: Paper feed problem

– Sharp Z70 printer Error Codes and quick guide on repairing:

Epson L4250 Adjustment Program

– OS Support: only Windows Operating System.
– Because Adjprog.exe gets Hardware ID info => Antivirus will misunderstand Adjprog.exe is the virus ==> you need to disable antivirus before extract and run Epson L4250 Adjustment Program or add to exclusion folder
– Limitation: Unlimited using on only 1 Computer.
– Epson L4250 AdjProg or Epson L4250 Adjustment Program or Epson L4250 Adj Program, is a middleware developed by third-party software to supply for Epson L4250 printer, making printer continuous printing without error.

– Epson L4250 Adjustment Program is featured with clearing the waste ink counter, ultra-deep clean to clean the printhead, adjust the smoothness of the printhead, adjust the motor headers, and fix the errors: no printing, lack of colour printing, colour blur, prints with horizontal and vertical stripes…

Epson L4250 Adjustment Functions:

– Bi-D Adjustment
– USB ID Input
– Initial Ink Charge
– Deep Cleaning the Print Head
– Reset Waste Ink Pad Counter
– Head ID Setting
– EEPROM initial setting
– Top margin Adjustment

Using Epson L4250 Adjustment Program

– Choose printer model and usb connection

– Choose Particular Adjustment Mode

Using Epson L4250 Adjustment Program Step 2

– Choose Waste Ink Pad Counter

Using Epson L4250 Adjustment Program Step 4

– Read Waste Ink Pad Counter

Using Epson L4250 Adjustment Program Step 5

– Reset Waste Ink Pad Counter

Using Epson L4250 Adjustment Program Step 6

Active Epson L4250 Adjustment Program

– Run Adjprog.exe, Copy L4250 Hardware ID, send it to admin email : [email protected] to get serial key and then active Epson L4250 Adjustment Program.