Sharp AR120E with list Error Codes and Epson XP-445 Adjustment Program

Sharp AR120E Printer with list Error Codes and Epson XP-445 Adjustment Program

– Printer model: Sharp AR120E
– Error codes on Sharp AR120E with details instruction fixing:

Code: E7 01
Description: Duplex model memory setup error, memory not-detected error
Causes: The memory is not set properly or the memory capacity is not set to the duplex setup (6M). Cancel method: Set SIM 26-39 code number to 2.

Code: E7 03
Description: HSYNC not detected.
Causes: LSU (laser diode, reception element, APC circuit) trouble LSU drive circuit (ASIC) trouble

Code: E7 04
Description: CCD white level trouble
Causes: CCD drive circuit (CCD PWB, ASIC harness) trouble Copy lamp lighting trouble (Copy lamp, invertor PWB

Code: E7 05
Description: CCD black level trouble
Causes: CCD drive circuit (CCD PWB, ASIC, harness) trouble

Code: E7 12
Description: Shading trouble (White correction)
Causes: Dirt on white plate for scanning white level

Code: E7 14
Description: ASIC connection trouble
Causes: Improper connection between CPU and ASIC (pattern cut, improper connection of lead pin)

Code: E7 15
Description: Copy lamp disconnection trouble
Causes: Copy lamp or copy lamp drive circuit (invertor PWB) trouble Copy lamp disconnection

Code: F6 10
Description: FAX PWB trouble
Causes: Communication trouble between the MCU and the FAX board or between the FAX board and the FAX panel Cancel method: Turn OFF/ON the power. Check connections.

Code: F6 80
Description: Communication trouble with FAX PWB (Protocol)
Causes: Error in data reception from the FAX board to the MCU. Occurs when the message header of the message format is other than F. Cancel method: Turn OFF/ON the power.

Code: F6 81
Description: Communication trouble with FAX PWB (Parity)
Causes: Error in data reception from the FAX board to the MCU. Occurs when the odd number parity set with SMR (serial mode register) differs from the reception data. Cancel method: Turn OFF/ON the power.

Code: F6 82
Description: Communication trouble with FAX PWB (Overrun)
Causes: Error in data reception from the FAX board to the MCU Occurs when the next data reception is completed with RDRF (Receive Data Register Full) flag of SS (Reserial status register) set to 1. Cancel method: Turn OFF/ON the power.

Code: F6 84
Description: Communication trouble with FAX PWB (Framing)
Causes: Error in data reception from the FAX board to the MCU. Occurs when the stop bit is 0. (The stop bit must be 1.) Cancel method: Turn OFF/ON the power.

Code: F6 88
Description: Communication trouble with FAX PWB (Time-out)
Causes: Occurs when time is out without response in data communication between the FAX board and the MCU. Cancel method: Turn OFF/ON the power.

Code: H2 00
Description: Thermistor open detection
Causes: The fusing thermistor is open.

Code: H3 00
Description: Heat roller abnormally high temperature
Causes: The fusing temperature rises above 240°C.

Code: H4 00
Description: Heat roller abnormally low temperature
Causes: The fusing temperature does not reach 185°C within 27 sec of turning on the power, or the fusing temperature keeps at 140°C.

Code: L1 00
Description: Feeding is not completed within the specified time after starting feeding.
Causes: When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn OFF. Or when the mirror base is fed for the specified time (about 6 sec) after start of copy return, the mirror home position sensor (MHPS) does not turn OFF.

Code: L3 00
Description: Return is not completed within the specified time.
Causes: When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn ON.Or when the mirror base is returned for the specified time (about 6 sec) after start of copy return, the mirror home position sensor (MHPS) does not turn ON.

– Sharp AR120E printer Error Codes and quick guide on repairing:

Code: L4 01
Description: Main motor lock
Causes: When the main motor encoder pulse is not detected for 100msec.

Code: L6 10
Description: Polygon motor lock
Causes: The lock signal (specified rpm signal) does not return within a certain time (about 20sec) from starting the polygon motor rotation

Code: U2 01
Description: Counter sum check error
Causes: When the counter check sum value stored in the EEPROM is abnormal.

Code: U2 04
Description: EEPROM serial communication error
Causes: When a communication trouble occurs with the EEPROM.

Epson XP-445 Adjustment Program

– OS Support: only Windows Operating System.
– Because Adjprog.exe gets Hardware ID info => Antivirus will misunderstand Adjprog.exe is the virus ==> you need to disable antivirus before extract and run Epson XP-445 Adjustment Program or add to exclusion folder
– Limitation: Unlimited using on only 1 Computer.
– Epson XP-445 AdjProg or Epson XP-445 Adjustment Program or Epson XP-445 Adj Program, is a middleware developed by third-party software to supply for Epson XP-445 printer, making printer continuous printing without error.

– Epson XP-445 Adjustment Program is featured with clearing the waste ink counter, ultra-deep clean to clean the printhead, adjust the smoothness of the printhead, adjust the motor headers, and fix the errors: no printing, lack of colour printing, colour blur, prints with horizontal and vertical stripes…

Epson XP-445 Adjustment Functions:

– Bi-D Adjustment
– USB ID Input
– Initial Ink Charge
– Deep Cleaning the Print Head
– Reset Waste Ink Pad Counter
– Head ID Setting
– EEPROM initial setting
– Top margin Adjustment

Using Epson XP-445 Adjustment Program

– Choose printer model and usb connection

– Choose Particular Adjustment Mode

Using Epson XP-445 Adjustment Program Step 2

– Choose Waste Ink Pad Counter

Using Epson XP-445 Adjustment Program Step 4

– Read Waste Ink Pad Counter

Using Epson XP-445 Adjustment Program Step 5

– Reset Waste Ink Pad Counter

Using Epson XP-445 Adjustment Program Step 6

Active Epson XP-445 Adjustment Program

– Run Adjprog.exe, Copy XP-445 Hardware ID, send it to admin email : [email protected] to get serial key and then active Epson XP-445 Adjustment Program.