Samsung SF650P model and fix error codes list

Samsung SF650P model and fix error codes list

– Compatible Printer model: Samsung SF650P
– Samsung SF650P Error Codes with quick guides:

• Code: 01
• Display: Document Jam
• Description: When Document Jam occurred at ADF module, this is displayed on LCD.
• Troubleshooting Guides: Clear the JAM.

• Code: 02
• Display: [Door Open]
• Description: The front cover is not securely latched.
• Troubleshooting Guides: Close the front door.

• Code: 03
• Display: [ No Paper ] Add Paper
• Description: When there is no paper in CASSETTE Tray, machine displays this message on LCD.
• Troubleshooting Guides: Load paper in the paper tray.

• Code: 04
• Display: [Paper Jam 0] Open/Close Door
• Description: When the machine encountered paper jam in pick-up area, Machine displays on the LCD.
• Troubleshooting Guides: Clear the JAM.

• Code: 04-002
• Display: Error #04-002 Turn off then on
• Description: LSU error has occurred
• Troubleshooting Guides: 1. Enter the EDC mode. 2. Execute the LSU test. 3. If the LSU does not operate, replace it.

• Code: 05
• Display: [Paper Jam 1] Open/Close Door
• Description: When the machine encountered paper jam in paper exit of Machine, machine displays on LCD.
• Troubleshooting Guides: Clear the JAM.

• Code: 06
• Display: [Paper Jam 2] Check Insidey.
• Description: When the machine encountered paper jam in paper exit of Machine, machine displays on the LCD.
• Troubleshooting Guides: Clear the JAM.

• Code: 07
• Display: [COMM. Error]
• Description: When the machine has problem in communication, it displayed on the LCD. Machine displays this in case of Transmission. Machine displays this in case of fax handshaking step of Reception.
• Troubleshooting Guides: Ask the sender to try again.

• Code: 08
• Display: [Line Error]
• Description: When the machine has problem in case of Fax Data reception step.
• Troubleshooting Guides: Try again. If the problem persists, wait an hour or so for the line to clear and try again. Or, turn the ECM on.

• Code: 09
• Display: [No Answer]
• Description: The remote fax machine has not answered after several redial attempts.
• Troubleshooting Guides: Try again. Make sure that the remote machine is operational.

• Code: 10
• Display: [Incompatible]
• Description: The remote machine does not have the requested feature, such as a delayed transmission. It also occurs if the remote machine does not have enough memory space to complete the operation you are attempting.
• Troubleshooting Guides: Reconfirm the remote machine’s features.

• Code: 11
• Display: Line Busy
• Description: The remote person did not answer or the line is already engaged.
• Troubleshooting Guides: Try again after a few minutes.

Solve Samsung SF650P Error codes

• Code: 12
• Display: Power Failure
• Description: Power has turned off then on and the machine’s memory has not been saved.
• Troubleshooting Guides: You need to start again the job which you were trying to do before the power failure.

• Code: 13
• Display: [Stop Pressed]
• Description: The Stop/Clear button is pressed during a copy or fax operation.
• Troubleshooting Guides: Try again.

• Code: 14
• Display: Memory Full
• Description: The memory is full.
• Troubleshooting Guides: Delete unnecessary documents, retransmit after more memory becomes available or split the transmission into more than one operation.

• Code: 15
• Display: CRU Fuse Error
• Description: When the machine failed in installing the new toner cartridge.
• Troubleshooting Guides: Open the front door and take out the toner cartridge. Then re-install it.

• Code: 16
• Display: [Hsync Error] Or [LSU Error]
• Description: When the machine has encountered the LSU could not reach the READY state.
• Troubleshooting Guides: Enter the EDC mode.(Refe to EDC mode). And check the LSU Control Test. If the LSU is defective, replace it.

• Code: 17
• Display: [Toner Low]
• Description: Small amount of toner is left in the cartridge. The estimated cartridge life of toner is close.
• Troubleshooting Guides: Prepare a new cartridge for replacement. You may temporarily increase the printing quality by redistributing the toner.

• Code: 18
• Display: Replace Toner
• Description: Small amount of toner is left in the cartridge.
• Troubleshooting Guides: Replace the toner cartridge.

• Code: 19
• Display: [Bypass Jam]
• Description: When the machine detected the nonfeeding from BYPASS tray.
• Troubleshooting Guides: Clear the JAM.

• Code: 20
• Display: Group Not Available
• Description: You have tried to select a group location number where only a single location number can be used, such as when adding locations for a broadcasting operation.
• Troubleshooting Guides: Just use a one-touch or speed dial number or dial a number manually using the number keypad

• Code: 21
• Display: Retry Redial
• Description: The machine is waiting for a specified time interval to redial a previously busy station.
• Troubleshooting Guides: You can press OK to immediately redial, or Stop/Clear to cancel the redial operation.

• Code: 22
• Display: NO. Not Assigned
• Description: The one-touch or speed dial location you tried to use has no number assigned to it
• Troubleshooting Guides: Dial the number manually using the number keypad or assign the number.

• Code: 23
• Display: Load Document
• Description: You have attempted to set up a copy or fax operation with no document loaded.
• Troubleshooting Guides: Load a document and try again.

• Code: 24
• Display: Cancel ? 1:Yes 2:No
• Description: Your machine’s memory has become full while documents were being loaded into memory.
• Troubleshooting Guides: To cancel the fax job, press the No 1 button Yes. If you want to send the pages already stored, press the No 2 button No. You should send the remaining pages later when the memory is available.

• Code: 25
• Display: Operation Not Assigned
• Description: You are doing in the Add/Cancel operation, but there is no jobs waiting.
• Troubleshooting Guides: Check the display to see if there is any scheduled job. The display should indicate them in standby mode, for example, Delay Fax.

• Code: 26
• Display: [Low Heat Error]
• Description: Temperature could not reach certain level.
• Troubleshooting Guides: Refer to the flow chart of the fuser problem.

• Code: 27
• Display: Open Heat Error
• Description: The thermistor has been disconnected.
• Troubleshooting Guides: Refer to the flow chart of the fuser problem.

• Code: 28
• Display: [Over Heat]
• Description: Temperature has gone up very high degree.
• Troubleshooting Guides: Refer to the flow chart of the fuser problem.

• Code: 29
• Display: [Jam 1] or [No Cartridge]
• Description: There is no Cartridge in MFP.
• Troubleshooting Guides: Install the toner cartridge.

• Code: 30
• Display: Toner Exhausted Replace Toner
• Description: The cartridge is out of toner.
• Troubleshooting Guides: Replace the toner cartridge.

• Code: 31
• Display: Toner Empty Replace Toner
• Description: Toner is empty, replace or order for new toner.
• Troubleshooting Guides: Replace the toner cartridge.

• Code: 32
• Display: Non Samsung Cartridge
• Description: When NON-Samsung cartridge is inserted in MFP.
• Troubleshooting Guides: Replace the toner cartridge.

– Get more information about Epson XP 15000 troubleshooting, click here

– Get more error code list with quick guide to fix printer product, click here

– About get help with reseting Epson inkpad or others, click here

Samsung printer reset software introduction:

Notes before resetting Samsung printer:

– Identify accurate version, serial and crum of Samsung printer.
– How to get Samsung printer model info: Click Here
– Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.
– It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.
– And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the “UPS” (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
– This firmware will be installed directly to your printer. Before opening firmare link make sure that printer is turned on and connected to your computer and printer drivers are installed correctly.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!

How To Run Firmware Fix Samsung printer

1. Connect the printer to the computer and turn it on.
2. Wait until the printer is ready for work.
3. Drag and drop *.hd to usbprns2.exe file.

4. The reprogramming process starts automatically.
5. Wait until the printer reprograms (10-20 minute) and restarts.
6. After that the reprogramming process is finished, restart the printer.

Contact us to get support with Samsung SF650P Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.