Samsung SCX4828FN model and fix error codes list

Samsung SCX4828FN model and fix error codes list

– Compatible Printer model: Samsung SCX4828FN
– Samsung SCX4828FN Error Codes with quick guides:

• Code: 01
• Display: [COMM. Error]
• Description: The machine has a communication problem.
• Troubleshooting Guides: Ask the sender to try again.

• Code: 02
• Display: [Incompatible]
• Description: The machine has received a fax from which is registered as a junk fax.
• Troubleshooting Guides: The received fax data will be deleted.

• Code: 03
• Display: [Line Error]
• Description: Your machine cannot connect with the receiving fax machine or has lost contact because of a problem with the phone line.
• Troubleshooting Guides: Try again. If the problem persists, wait an hour or so for the line to clear and try again. Or, turn the ECM mode on.

• Code: 04
• Display: [No Answer]
• Description: The receiving fax machine has not answered after several redial attempts.
• Troubleshooting Guides: Try again. Make sure that the receiving machine is operational.

• Code: 05
• Display: [Stop Pressed]
• Description: Stop/Clear has been pressed during an operation.
• Troubleshooting Guides: Try again.

• Code: 06
• Display: [yyy] Paper Empty
• Description: There is no paper in the tray.
• Troubleshooting Guides: Load paper in the tray.

• Code: 07
• Display: [yyy] Paper Mismatch
• Description: The paper size specified in the printer properties does not match the paper you are loading.
• Troubleshooting Guides: Load correct paper in the tray.

• Code: 08
• Display: Authentication Failure
• Description: The ID or password you entered is incorrect.
• Troubleshooting Guides: Enter the correct ID or password.

• Code: 09
• Display: Connection Error
• Description: Connection with the SMTP server failed
• Troubleshooting Guides: Check the server settings and the network cable.

• Code: 10
• Display: Data Read Fail Check USB Mem.
• Description: Time expired while reading data.
• Troubleshooting Guides: Try again.

• Code: 11
• Display: Data Write Fail Check USB Mem.
• Description: Storing to the USB memory failed.
• Troubleshooting Guides: Check the available USB memory space.

• Code: 12
• Display: Document Jam
• Description: The loaded original has jammed in the ADF.
• Troubleshooting Guides: Clear the jam.

Solve Samsung SCX4828FN Error codes

• Code: 13
• Display: Door Open
• Description: The front cover is not securely latched.
• Troubleshooting Guides: Close the cover until it locks into place.

• Code: 14
• Display: Duplex Jam 0 Check Inside
• Description: Paper has jammed during duplex printing. This is applicable only to machines with this feature.
• Troubleshooting Guides: Clear the jam.

• Code: 15
• Display: Duplex Jam 1 Open/Close Door
• Description: Paper has jammed during duplex printing. This is applicable only to machines with this feature.
• Troubleshooting Guides: Clear the jam.

• Code: 16
• Display: Enter Again
• Description: You entered an unavailable item.
• Troubleshooting Guides: Enter the correct item again.

• Code: 17
• Display: File Format Not Supported
• Description: The selected file format is not supported.
• Troubleshooting Guides: Use the correct file format

• Code: 18
• Display: Fuser Fan Locked
• Description: There is a problem in the cooling fan of the machine.
• Troubleshooting Guides: Open and then close the front cover.

• Code: 19
• Display: Group Not Available
• Description: You have tried to select a group location number where only a single location number can be used, such as when adding locations for a Multiple Send operation.
• Troubleshooting Guides: Use a speed dial number or dial a number manually using the number keypad.

• Code: 20
• Display: Install Toner
• Description: The toner cartridge is not installed.
• Troubleshooting Guides: Install the toner cartridge.

• Code: 21
• Display: Invalid Toner
• Description: The toner cartridge you have installed is not for your machine.
• Troubleshooting Guides: Install the a Samsunggenuine toner cartridge designed for your machine.

• Code: 22
• Display: Line Busy
• Description: The receiving fax machine did not answer or the line is already engaged.
• Troubleshooting Guides: Try again after a few minutes.

• Code: 23
• Display: Low Power
• Description: The machine is in the previous stage of the power save mode.
• Troubleshooting Guides:

• Code: 24
• Display: Mail Exceeds Server Support
• Description: The mail size is larger than the supported size by SMTP server.
• Troubleshooting Guides: Divide your mail or reduce the resolution.

• Code: 25
• Display: Main Motor Locked
• Description: There is a problem in the main motor.
• Troubleshooting Guides: Open and then close the front cover.

• Code: 26
• Display: Memory Full
• Description: The memory is full.
• Troubleshooting Guides: Delete unnecessary fax jobs and retransmit after more memory becomes available. Alternatively, split the transmission into more than one operation.

• Code: 27
• Display: Not Assigned
• Description: The speed button or speed dial number you tried to use has no number assigned to it.
• Troubleshooting Guides: Enter the number manually using the number keypad or store the number or address.

• Code: 28
• Display: Not Available Try Again Later
• Description: Can not perform the task immediately because too many tasks are running at once.
• Troubleshooting Guides: Try again when current task is completed.

• Code: 29
• Display: One Page is Too Large
• Description: Single page data exceeds the configured mail size
• Troubleshooting Guides: Reduce the resolution and try again.

• Code: 30
• Display: Operation Not Assigned
• Description: You are in the Add Page/Cancel Job operation, but there are no jobs stored.
• Troubleshooting Guides: Check the display to see if there are any scheduled jobs.

• Code: 31
• Display: Out-Bin Full
• Description: The output tray of the machine is full of paper
• Troubleshooting Guides: Remove paper.

• Code: 32
• Display: Paper Jam 0 Open/Close Door
• Description: Paper has jammed in the feeding area of the tray.
• Troubleshooting Guides: Clear the jam.

• Code: 33
• Display: Paper Jam 1 Open/Close Door
• Description: Paper has jammed inside the machine
• Troubleshooting Guides: Clear the jam.

• Code: 34
• Display: Paper Jam 2 Check Inside
• Description: Special print media has jammed in the paper exit area.
• Troubleshooting Guides: Clear the jam.

• Code: 35
• Display: Replace Toner
• Description: This message appears between Toner Empty and Toner Low status.
• Troubleshooting Guides: Replace the toner cartridge with a new one.

• Code: 36
• Display: Scanner locked
• Description: The scanner module is locked
• Troubleshooting Guides: Unlock the scanner and press Stop/ Clear.

• Code: 37
• Display: Self Diagnostics Temperature
• Description: The engine in your machine is checking problems detected.
• Troubleshooting Guides: Wait a few minutes

• Code: 38
• Display: Self Diagnostics LSU
• Description: The LSU in your machine is checking problems detected.
• Troubleshooting Guides: Wait a few minutes

• Code: 39
• Display: Toner Empty
• Description: The toner cartridge has run out. The machine stops printing. Press OK to toggle the message to Stop or Continue.
• Troubleshooting Guides: You can select the option among Stop or Continue with the left/right arrow. If you select Stop by pressing OK on the control panel, the machine stops printing. If you select Continue, the machine keeps printing, but the quality cannot be guaranteed. If you do not select any, the machine will work as Stop is selected. Replace the toner cartridge with a new one.

• Code: 40
• Display: Toner Exhausted
• Description: The lifespan of the toner cartridge which the arrow indicates is reached.
• Troubleshooting Guides: This message appears when the toner is completely empty, and your machine stops printing. Replace the corresponding toner cartridge with a Samsunggenuine cartridge.

• Code: 41
• Display: Toner Low
• Description: The corresponding toner cartridge is almost empty.
• Troubleshooting Guides: Take out the toner cartridge and thoroughly shake it. By doing this, you can temporarily reestablish printing operations.

• Code: 42
• Display: Updating Data Please Wait…
• Description: This message appears when there is a change in the system setting or when you back up a data.
• Troubleshooting Guides: Do not turn the power off when this message is showing. Changes may not be saved and datas can be lost.

– Get more information about Epson XP 15000 troubleshooting, click here

– Get more error code list with quick guide to fix printer product, click here

– About get help with reseting Epson inkpad or others, click here

Samsung printer reset software introduction:

Notes before resetting Samsung printer:

– Identify accurate version, serial and crum of Samsung printer.
– How to get Samsung printer model info: Click Here
– Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.
– It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.
– And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the “UPS” (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
– This firmware will be installed directly to your printer. Before opening firmare link make sure that printer is turned on and connected to your computer and printer drivers are installed correctly.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!

How To Run Firmware Fix Samsung printer

1. Connect the printer to the computer and turn it on.
2. Wait until the printer is ready for work.
3. Drag and drop *.hd to usbprns2.exe file.

4. The reprogramming process starts automatically.
5. Wait until the printer reprograms (10-20 minute) and restarts.
6. After that the reprogramming process is finished, restart the printer.

Contact us to get support with Samsung SCX4828FN Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.