Samsung SCX4200 model and fix error codes list
– Compatible Printer model: Samsung SCX4200
– Samsung SCX4200 Error Codes with quick guides:
- Code: 01
- Display: Door Open
- Description: The front cover is not securely latched.
- Troubleshooting Guides: Close the cover until it locks into place.
- Code: 02
- Display: Hsync Error
- Description: A problem has occurred in the LSU (Laser Scanning Unit).
- Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, please call for service.
- Code: 03
- Display: [Invalid Cartridge]
- Description: There is invalid foner install.
- Troubleshooting Guides: Installed authorized toner cartridge.
- Code: 04
- Display: Low Heat Error
- Description: There is a problem in the fuser unit.
- Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, please call for service.
- Code: 05
- Display: [LSU Error]
- Description: A problem has occurred in the LSU (Laser Scanning Unit).
- Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, please call for service.
- Code: 06
- Display: [No Paper] Add Paper
- Description: The paper in the paper input tray has run out.
- Troubleshooting Guides: Load paper in the paper input tray.
- Code: 07
- Display: Open Heat Error
- Description: There is a problem in the fuser unit.
- Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, please call for service.
- Code: 08
- Display: [Over Heat]
- Description: There is a problem in the fuser unit.
- Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, please call for service.
- Code: 09
- Display: [Paper Jam 0] Open/Close Door
- Description: Paper has jammed in the feeding area of the paper input tray.
- Troubleshooting Guides: Clear the jam.
- Code: 10
- Display: [Paper Jam 1] Open/Close Door
- Description: Paper has jammed in the fuser area or in the manual feeder.
- Troubleshooting Guides: Clear the jam.
- Code: 11
- Display: [Paper Jam 2] Check Inside
- Description: Paper has jammed in the paper exit area.
- Troubleshooting Guides: Clear the jam.
- Code: 12
- Display: Power Failure
- Description: Power has turned off then on and the machine’s memory has not been back up.
- Troubleshooting Guides: The job which you were trying to do before the power failure must be completely re-done.
Solve Samsung SCX4200 Error codes
- Code: 13
- Display: Scanner Error
- Description: There is a problem in the scanner unit.
- Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, please call for service.
– Get more information about Epson XP 15000 troubleshooting, click here
– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here
Samsung printer reset software introduction:
Notes before resetting Samsung printer:
– Identify accurate version, serial and crum of Samsung printer.
– How to get Samsung printer model info: Click Here
– Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.
– It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.
– And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the “UPS” (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
– This firmware will be installed directly to your printer. Before opening firmare link make sure that printer is turned on and connected to your computer and printer drivers are installed correctly.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!
How To Run Firmware Fix Samsung printer
1. Connect the printer to the computer and turn it on.
2. Wait until the printer is ready for work.
3. Drag and drop *.hd to usbprns2.exe file.
4. The reprogramming process starts automatically.
5. Wait until the printer reprograms (10-20 minute) and restarts.
6. After that the reprogramming process is finished, restart the printer.
Contact us to get support with Samsung SCX4200 Error case
Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.
