Samsung ProXpress C3060FW model and fix error codes list

– Compatible Printer model: Samsung ProXpress C3060FW
– Samsung ProXpress C3060FW Error Codes with quick guides:

Code: 11-2T11, 11-2T21
Description: Paper mismatch Tray 1 Load [A4]
Paper mismatch Tray 2 Load [A4] [Plain]
Causes: Paper in tray is not matched to the machine paper setting.
Troubleshooting Guides: 1) Check and change the paper setting of the corresponding tray properly.

Code: 11-2T31, 11-2T61
Description: Paper mismatch Tray 3 Load [A4]
Paper mismatch MPT Load [A4]
Causes: Paper in tray is not matched to the machine paper setting.
Troubleshooting Guides: 1) Check and change the paper setting of the corresponding tray properly.

Code: A1-1210
Description: Error: #A1-1210 / Motor Failure: #A1-1210. Turn off then on. Call for service if the problem persists
Causes: The fuser motor does not operate. / The fuser motor is operating but is recognized as stop status.
Troubleshooting Guides: 1) Turn the machine off then on. If the error persists, turn the machine off again.
2) Remove the rear and right cover.
3) Check if there are any obstacles or paper around the fuser unit.
4) Check if the connection between main board and fuser motor are correct.
5) If the connection is OK, replace the fuser motor.
6) If there is a driver test for this component, please try it first. If the problem persists, replace the main board.

Code: A1-3621, A1-3622, A1-4111
Description: Error: #A1-3621 / Motor Failure: #A1-3621. Turn off then on. Call for service if the problem persists
Error: #A1-3622 / Motor Failure: #A1-3622. Turn off then on. Call for service if the problem persists
Error: #A1-4111 / Motor Failure: #A1-4111. Turn off then on. Call for service if the problem persists
Causes: The motor for OPC/Deve/ITB does not operate normally.
Troubleshooting Guides: 1) Turn the machine off then on. If the error persists, turn the machine off again.
2) Remove the right cover.
3) Check if the connection between main board and 2 motors in the main drive unit are correct.
4) If the connection is OK, replace the motor in the main drive unit.
5) If there is a driver test for this component, please try it first. If the problem persists, replace the main board.

Code: A1-4112, A1-4310
Description: Error: #A1-4112 / Motor Failure: #A1-4112. Turn off then on. Call for service if the problem persists
Error: #A1-4310 / Motor Failure: #A1-4310. Turn off then on. Call for service if the problem persists
Causes: The motor for OPC/Deve/ITB does not operate normally.
Troubleshooting Guides: 1) Turn the machine off then on. If the error persists, turn the machine off again.
2) Remove the right cover.
3) Check if the connection between main board and 2 motors in the main drive unit are correct.
4) If the connection is OK, replace the motor in the main drive unit.
5) If there is a driver test for this component, please try it first. If the problem persists, replace the main board.

Code: A2-1210, A2-2110
Description: Error: #A2-1210 / Fan Failure: #A2-1210. Turn off then on. Call for service if the problem persists
Error: #A2-2110 / Fan Failure: #A2-2110. Turn off then on. Call for service if the problem persists
Causes: The SMPS fan or Fuser fan does not operate normally.
Troubleshooting Guides: 1) Turn the machine off then on. If the error persists, turn the machine off again.
2) Remove the right cover.
3) Check if the connection between main board and the related fan is correct.
4) If the connection is OK, replace the defective fan.

Code: A3-3211, A3-3212
Description: Error: #A3-3211 / Sensor Failure: #A3-3211. Turn off then on. Call for service if the problem persists
Error: #A3-3212 / Sensor Failure: #A3-3212. Turn off then on. Call for service if the problem persists
Causes: The inner temperature sensor is defective.
Troubleshooting Guides: 1) Turn the machine off then on. If the error persists, turn the machine off again.
2) Enter the tech mode. Check the temperature sensor output.
3) If the sensor is defective, replace it.
4) If the temperature sensor is OK, replace the main board.

Code: A3-3311, A3-3312
Description: Error: #A3-3311 / Sensor Failure: #A3-3311. Turn off then on. Call for service if the problem persists
Error: #A3-3312 / Sensor Failure: #A3-3312. Turn off then on. Call for service if the problem persists
Causes: The outer temperature sensor is defective.
Troubleshooting Guides: 1) Turn the machine off then on. If the error persists, turn the machine off again.
2) Enter the tech mode. Check the temperature sensor output.
3) If the sensor is defective, replace it.
4) If the temperature sensor is OK, replace the main board.

Code: A3-3320
Description: Not proper Room Temp / The room temperature is not suitable for this set use. Please adjust room temperature
Causes: The value of the outer temperature sensor is out of normal area.
Troubleshooting Guides: 1) Check if the machine is installed in the proper area.
2) If the temperature sensor is defective, replace it.

Code: C2-2110
Description: Prepare new Y toner/ Prepare new yellow toner cartridge
Causes: There is not enough toner in the yellow toner cartridge
Troubleshooting Guides: 1) Print the supply information report. Check the life remaining of the toner cartridge.
2) If its life is at the end, turn the machine off and replace the toner cartridge with new one.

Code: C2-2120, C2-2140, C2-2150
Description: Replace new Y toner / Replace with new yellow toner cartridge
Replace new Y toner / End of life, Replace with new yellow toner cartridge
Causes: The yellow toner cartridge is at the end of its life.
Troubleshooting Guides: 1) If its life is at the end, turn the machine off and replace the yellow toner cartridge with new one.

Code: C2-2160, C2-2170
Description: Replace new Y toner / Replace with new yellow toner cartridge
Replace new Y toner / End of life, Replace with new yellow toner cartridge
Causes: The yellow toner cartridge is at the end of its life.
Troubleshooting Guides: 1) If its life is at the end, turn the machine off and replace the yellow toner cartridge with new one.

Samsung ProXpress C3060FW error code and quick guides

Solve Samsung ProXpress C3060FW Error codes

Code: C2-2410
Description: Y toner not installed / Install yellow toner cartridge
Causes: The yellow toner cartridge is not installed or the CRUM has some problem.
Troubleshooting Guides: 1) Check if the yellow toner cartridge is installed properly. Turn the machine off then on.
2) If the error message is not disappear, remove the yellow toner cartridge. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge.
3) If the problem persists, check that the CRUM contact area is contaminated. Clean it.
4) If the problem persists, replace the yellow toner cartridge with new one.

Code: C2-2512, C2-2515, C2-2517
Description: Y Toner Not Compatible / Yellow toner cartridge is not compatible. Check guide
Causes: The yellow toner cartridge is not compatible.
Troubleshooting Guides: 1) If the toner cartridge is not a Samsung genuine toner cartridge, replace with new one.

Code: C2-2518, C2-2526
Description: Y Toner Not Compatible / Yellow toner cartridge is not compatible. Check guide
Causes: The yellow toner cartridge is not compatible.
Troubleshooting Guides: 1) If the toner cartridge is not a Samsung genuine toner cartridge, replace with new one.

Code: C2-2711, C2-2712
Description: Error: #C2-271x / Toner Cart Failure: #C2-271x. Call for service
Causes: The yellow toner cartridge is not installed or the CRUM has some problem.
Troubleshooting Guides: 1) Check if the yellow toner cartridge is installed properly. Turn the machine off then on.
2) If the error message is not disappear, remove the yellow toner cartridge. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge.
3) If the problem persists, check that the CRUM contact area is contaminated. Clean it.
4) If the problem persists, replace the yellow toner cartridge with new one.

Code: C2-2713, C2-2714
Description: Error: #C2-271x / Toner Cart Failure: #C2-271x. Call for service
Causes: The yellow toner cartridge is not installed or the CRUM has some problem.
Troubleshooting Guides: 1) Check if the yellow toner cartridge is installed properly. Turn the machine off then on.
2) If the error message is not disappear, remove the yellow toner cartridge. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge.
3) If the problem persists, check that the CRUM contact area is contaminated. Clean it.
4) If the problem persists, replace the yellow toner cartridge with new one.

Code: C2-3110
Description: Prepare new M toner/ Prepare new magenta toner cartridge
Causes: There is not enough toner in the magenta toner cartridge
Troubleshooting Guides: 1) Print the supply information report. Check the life remaining of the toner cartridge.
2) If its life is at the end, turn the machine off and replace the magenta toner cartridge with new one.

Code: C2-3120, C2-3140, C2-3150
Description: Replace new M toner / Replace with new magenta toner cartridge
Replace new M toner / End of life, Replace with new magenta toner cartridge
Causes: The magenta toner cartridge is at the end of its life.
Troubleshooting Guides: 1) If its life is at the end, turn the machine off and replace the magenta toner cartridge with new one.

Code: C2-3160, C2-3170
Description: Replace new M toner / Replace with new magenta toner cartridge
Replace new M toner / End of life, Replace with new magenta toner cartridge
Causes: The magenta toner cartridge is at the end of its life.
Troubleshooting Guides: 1) If its life is at the end, turn the machine off and replace the magenta toner cartridge with new one.

Code: C2-3410
Description: M toner not installed / Install magenta toner cartridge
Causes: The magenta toner cartridge is not installed or the CRUM has some problem.
Troubleshooting Guides: 1) Check if the magenta toner cartridge is installed properly. Turn the machine off then on.
2) If the error message is not disappear, remove the magenta toner cartridge. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge.
3) If the problem persists, check that the CRUM contact area is contaminated. Clean it.
4) If the problem persists, replace the magenta toner cartridge with new one.

Code: C2-3512, C2-3515, C2-3517
Description: M toner Not Compatible / Magenta toner cartridge is not compatible. Check guide
Causes: The magenta toner cartridge is not compatible.
Troubleshooting Guides: 1) If the toner cartridge is not a Samsung genuine toner cartridge, replace with new one.

Code: C2-3518, C2-3526
Description: M toner Not Compatible / Magenta toner cartridge is not compatible. Check guide
Causes: The magenta toner cartridge is not compatible.
Troubleshooting Guides: 1) If the toner cartridge is not a Samsung genuine toner cartridge, replace with new one.

Code: C2-3711, C2-3712, C2-3713
Description: Error: #C2-371x / Toner Cart Failure: #C2-371x. Call for service
Causes: The magenta toner cartridge is not installed or the CRUM has some problem.
Troubleshooting Guides: 1) Check if the magenta toner cartridge is installed properly. Turn the machine off then on.
2) If the error message is not disappear, remove the magenta toner cartridge. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge.
3) If the problem persists, check that the CRUM contact area is contaminated. Clean it.
4) If the problem persists, replace the magenta toner cartridge with new one.

Code: C2-4110
Description: Prepare new C toner / Prepare new cyan toner cartridge
Causes: There is not enough toner in the cyan toner cartridge
Troubleshooting Guides: 1) Print the supply information report. Check the life remaining of the toner cartridge.
2) If its life is at the end, turn the machine off and replace the cyan toner cartridge with new one.

Code: C2-4120, C2-4140, C2-4150
Description: Replace new C toner / Replace with new cyan toner cartridge
Replace new C toner / End of life, Replace with new cyan toner cartridge
Causes: The cyan toner cartridge is at the end of its life.
Troubleshooting Guides: 1) If its life is at the end, turn the machine off and replace the cyan toner cartridge with new one.

Code: C2-4160, C2-4170
Description: Replace new C toner / Replace with new cyan toner cartridge
Replace new C toner / End of life, Replace with new cyan toner cartridge
Causes: The cyan toner cartridge is at the end of its life.
Troubleshooting Guides: 1) If its life is at the end, turn the machine off and replace the cyan toner cartridge with new one.

Code: C2-4410
Description: C toner not installed / Install cyan toner cartridge
Causes: The cyan toner cartridge is not installed or the CRUM has some problem.
Troubleshooting Guides: 1) Check if the cyan toner cartridge is installed properly. Turn the machine off then on.
2) If the error message is not disappear, remove the cyan toner cartridge. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge.
3) If the problem persists, check that the CRUM contact area is contaminated. Clean it.
4) If the problem persists, replace the cyan toner cartridge with new one.

Code: C2-4512, C2-4515, C2-4517
Description: C toner Not Compatible / Cyan toner cartridge is not compatible. Check guide
Causes: The cyan toner cartridge is not compatible.
Troubleshooting Guides: 1) If the toner cartridge is not a Samsung genuine toner cartridge, replace with new one.

Code: C2-4518, C2-4526
Description: C toner Not Compatible / Cyan toner cartridge is not compatible. Check guide
Causes: The cyan toner cartridge is not compatible.
Troubleshooting Guides: 1) If the toner cartridge is not a Samsung genuine toner cartridge, replace with new one.

Code: C2-4711, C2-4712
Description: Error: #C2-471x / Toner Cart Failure: #C2-471x. Call for service
Causes: The cyan toner cartridge is not installed or the CRUM has some problem.
Troubleshooting Guides: 1) Check if the cyan toner cartridge is installed properly. Turn the machine off then on.
2) If the error message is not disappear, remove the cyan toner cartridge. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge.
3) If the problem persists, check that the CRUM contact area is contaminated. Clean it.
4) If the problem persists, replace the cyan toner cartridge with new one.

Code: C2-4713, C2-4714
Description: Error: #C2-471x / Toner Cart Failure: #C2-471x. Call for service
Causes: The cyan toner cartridge is not installed or the CRUM has some problem.
Troubleshooting Guides: 1) Check if the cyan toner cartridge is installed properly. Turn the machine off then on.
2) If the error message is not disappear, remove the cyan toner cartridge. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge.
3) If the problem persists, check that the CRUM contact area is contaminated. Clean it.
4) If the problem persists, replace the cyan toner cartridge with new one.

Code: C2-5110
Description: Prepare new K toner / Prepare new black toner cartridge
Causes: There is not enough toner in the black toner cartridge
Troubleshooting Guides: 1) Print the supply information report. Check the life remaining of the toner cartridge.
2) If its life is at the end, turn the machine off and replace the black toner cartridge with new one.

Code: C2-5120, C2-5140, C2-5150
Description: Replace new K toner / Replace with new black toner cartridge
Replace new toner / End of life, Replace with new black toner cartridge
Causes: The black toner cartridge is at the end of its life.
Troubleshooting Guides: 1) If its life is at the end, turn the machine off and replace the black toner cartridge with new one.

Code: C2-5160, C2-5170
Description: Replace new K toner / Replace with new black toner cartridge
Replace new toner / End of life, Replace with new black toner cartridge
Causes: The black toner cartridge is at the end of its life.
Troubleshooting Guides: 1) If its life is at the end, turn the machine off and replace the black toner cartridge with new one.

Code: C2-5410
Description: K toner not installed / Install black toner cartridge
Causes: The black toner cartridge is not installed or the CRUM has some problem.
Troubleshooting Guides: 1) Check if the black toner cartridge is installed properly. Turn the machine off then on.
2) If the error message is not disappear, remove the black toner cartridge. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge.
3) If the problem persists, check that the CRUM contact area is contaminated. Clean it.
4) If the problem persists, replace the black toner cartridge with new one.

Code: C2-5512, C2-5515, C2-5517
Description: K toner Not Compatible / Black toner cartridge is not compatible. Check guide
Causes: The black toner cartridge is not compatible.
Troubleshooting Guides: 1) If the toner cartridge is not a Samsung genuine toner cartridge, replace with new one.

Code: C2-5518, C2-5526
Description: K toner Not Compatible / Black toner cartridge is not compatible. Check guide
Causes: The black toner cartridge is not compatible.
Troubleshooting Guides: 1) If the toner cartridge is not a Samsung genuine toner cartridge, replace with new one.

Code: C2-5711, C2-5712
Description: Error: #C2-571x / Toner Cart Failure: #C2-571x. Call for service
Causes: The black toner cartridge is not installed or the CRUM has some problem.
Troubleshooting Guides: 1) Check if the black toner cartridge is installed properly. Turn the machine off then on.
2) If the error message is not disappear, remove the black toner cartridge. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge.
3) If the problem persists, check that the CRUM contact area is contaminated. Clean it.
4) If the problem persists, replace the black toner cartridge with new one.

Code: C2-5713, C2-5714
Description: Error: #C2-571x / Toner Cart Failure: #C2-571x. Call for service
Causes: The black toner cartridge is not installed or the CRUM has some problem.
Troubleshooting Guides: 1) Check if the black toner cartridge is installed properly. Turn the machine off then on.
2) If the error message is not disappear, remove the black toner cartridge. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge.
3) If the problem persists, check that the CRUM contact area is contaminated. Clean it.
4) If the problem persists, replace the black toner cartridge with new one.

Code: C5-1110, C5-1120
Description: Prepare TR.belt / Prepare new Image transfer belt unit
Replace TR. belt / Replace with new Image transfer belt unit
Causes: The ITB unit is at the end of its life.
Troubleshooting Guides: 1) Print the supply information report. Check the life remaining of the ITB unit.
2) If its life is at the end, turn the machine off and replace the ITB unit with new one.

Code: C5-1310
Description: Install TR. belt unit / Install transfer belt unit
Causes: The ITB unit is not installed properly.
Troubleshooting Guides: 1) Turn the machine off. Remove and reinstall the ITB unit.
2) Turn the machine on. If the problem persists, replace the ITB unit.

Code: C5-1410
Description: TR belt Not compatible / Transfer belt unit is not compatible. Check guide.
Causes: The ITB unit is not compatible.
Troubleshooting Guides: 1) Print the supply information report. Check information of the ITB Unit.
2) If the toner cartridge is not a Samsung genuine ITB Unit, replace with new one.

Code: C5-1710
Description: Error: #C5-1710 / Sensor Failure: #C5-1710. Turn off then on
Causes: The ITB home position sensor has the problem.
Troubleshooting Guides: 1) Turn the machine off. Replace the ITB Unit.

Code: C6-1110, C6-1120
Description: Prepare fuser unit / Prepare new fuser unit
Replace Fuser unit / Replace with new fuser unit
Causes: The fuser unit is at the end of its life.
Troubleshooting Guides: 1) Print the supply information report. Check the life remaining of the fuser unit.
2) If its life is at the end, turn the machine off and replace the fuser unit with new one.

Code: C7-1110, C7-1130
Description: Waste toner Near full / Waste toner container is almost full. Replace with new one
Waste tank Full/ Waste toner tank is full. Replace with new one
Causes: The waste toner container is at the end of its life.
Troubleshooting Guides: 1) Print the supply information report. Check the life remaining of the waste toner container.
2) If its life is at the end, turn the machine off and replace the waste toner container with new one.

Code: C7-1311
Description: Not Installed Waste tank
Causes: The waste toner container is not installed
Troubleshooting Guides: 1) Check if the waste toner container is installed properly.
2) Remove and reinstall the waste toner container.

Code: C9-1115
Description: Replace retard roller / Replace with new tray 1 retard roller
Causes: The pick up / forward / separation rollers for tray1 are at the end of its life.
Troubleshooting Guides: 1) Turn the machine off.
2) Replace the pick up roller Ass’y and separation roller Ass’y for tray1, and reset its count.

Code: C9-1122, C9-1125
Description: Replace pickup roller / Replace with new tray 2 pickup roller
Replace retard roller / Replace with new tray 2 retard roller
Causes: The pick up / forward / separation rollers for tray2 are at the end of its life.
Troubleshooting Guides: 1) Turn the machine off.
2) Replace the pick up/forward/separation rollers for Tray2, and reset its count.

Code: H1-1210, H1-1211
Description: Paper Jam in Tray 2
Causes: The jammed paper has occurred in the tray2.
Troubleshooting Guides: 1) Remove the jammed paper.
2) If the jammed paper occurs continually, check the followings. a) Check if the pick up/forward/separation roller for tray2 are worn out or contaminated. Clean the contaminated part or replace it. b) Check if the tray2 feed actuator is assembled correctly. If it is broken or deformed, replace it with new one. c) Check if the tray2 feed sensor connector is connected correctly. If the feed sensor is defective, replace it. d) If there is a service test for this component, perform it first. If the tray2 pick up clutch is found to be defective, replace it.

Code: H1-1252, H1-1254
Description: Paper Empty in tray 2 / Paper is empty in tray 2. Load paper
Causes: Paper is empty in Tray2.
Troubleshooting Guides: 1) Take off the cassette. If there is no paper on the tray2, load the paper.
2) If the problem persists, check the following. a) Check if the paper empty actuator is assembled correctly. If it is broken or deformed, replace it with new one. b) Check if the paper empty sensor connector is connected correctly. If the paper empty sensor is defective, replace it.

Code: H1-1310, H1-1311
Description: Paper Jam in Tray 3
Causes: The jammed paper has occurred in the tray3.
Troubleshooting Guides: 1) Remove the jammed paper.
2) If the jammed paper occurs continually, check the followings. a) Check if the pick up/forward/separation roller for tray3 are worn out or contaminated. Clean the contaminated part or replace it. b) Check if the tray3 feed actuator is assembled correctly. If it is broken or deformed, replace it with new one. c) Check if the tray3 feed sensor connector is connected correctly. If the feed sensor is defective, replace it. d) If there is a service test for this component, perform it first. If the tray3 pick up clutch is found to be defective, replace it.

Code: H1-1352, H1-1354
Description: Paper Empty in tray 3 / Paper is empty in tray 3. Load paper
Causes: Paper is empty in Tray3.
Troubleshooting Guides: 1) Take off the cassette. If there is no paper on the tray3, load the paper.
2) If the problem persists, check the following. a) Check if the paper empty actuator is assembled correctly. If it is broken or deformed, replace it with new one. b) Check if the paper empty sensor connector is connected correctly. If there is a service test for this component perform it first. If the paper empty sensor is found to be defective, replace it.

Code: M1-1110
Description: Paper Jam in Tray 1
Causes: The jammed paper has occurred in the tray1.
Troubleshooting Guides: 1) Remove the jammed paper.
2) If the jammed paper occurs continually, check the followings. a) Check if the pick up/forward/separation rollers are worn out or contaminated. Clean the contaminated part or replace it. b) Check if the actuator is assembled correctly.
3) Check the motor operation, by checking if there is a service test for this component, perform it first. If there is any defective parts, replace it or PH drive unit.

Code: M1-1610
Description: Paper Jamin MP tray
Causes: The jammed paper has occurred in the MP tray.
Troubleshooting Guides: 1) Remove the jammed paper.
2) If the jammed paper occurs continually, check the followings. a) Check if the MP pick up/forward/separation rollers are worn out or contaminated. Clean the contaminated part or replace it. b) Check if the actuator is assembled correctly. c) If there is a service test for the pick up , perform it first. If the clutch is defective, replace it. d) If the problem persists, replace the MP unit.

Code: M1-5112, M1-5113, M1-5120
Description: Paper Empty in tray 1 / Paper is empty in tray 1. Load paper
Paper Empty in all trays / Paper is empty in all trays. Load paper
Causes: Paper is empty in tray1 or all trays.
Troubleshooting Guides: 1) Take off the cassette. If there is no paper on the tray1, load the paper.
2) If the problem persists, check the following. a) Check if the paper empty actuator is assembled correctly. If it is broken or deformed, replace it with new one. b) Check if the paper empty sensor connector is connected correctly. If the paper empty sensor is defective, replace it.

Code: M1-5612
Description: Paper Empty in MP tray / Paper is empty in MP tray. Load paper
Causes: Paper is empty in MP tray.
Troubleshooting Guides: 1) If there is no paper on the MP tray, load the paper.
2) If the problem persists, check the following. a) Check if the MP paper empty actuator is assembled correctly. If it is broken or deformed, replace it with new one. b) Check if the MP paper empty sensor connector is connected correctly. If the paper empty sensor is defective, replace it.

Code: M2-1111, M2-1114, M2-2210
Description: Paper Jam inside machine
Paper Jam inside of duplex
Causes: The jammed paper has occurred inside machine.
Troubleshooting Guides: 1) Open the rear cover. Remove the jammed paper.
2) If the problem persists, check the following. a) Check if there is any obstacles or paper on the paper path. Remove it. b) Check if the FRAME-REGI unit and FRAME-SEPARATION unit are assembled properly. If there is any defective part in these units, replace it or Assy. c) Check the motor operation, gear in the PH drive unit. If there is any defective parts, replace it or PH drive unit. d) Check the T1–DRIVE unit. If there is any defective parts, replace it or T1–DRIVE unit.

Code: M3-1110, M3-1112
Description: Paper Jam in exit area Paper jam inside machine
Causes: The jammed paper has occurred in the exit area.
Troubleshooting Guides: 1) Remove the jammed paper.
2) If the problem persists, check the following. a) Check if there is any obstacles or paper on the paper path. Remove it. b) Check if the fuser unit is assembled properly. If the fuser unit is defective, replace it. c) Check if the exit unit has any defective parts. Replace the exit unit.

Code: M3-2130
Description: Output bin is full / Paper in output bin is full. Remove printed paper
Causes: The machine detected that the output tray has got full or the bin-full sensor is defective.
Troubleshooting Guides: 1) Remove the paper on the output tray.
2) Check if the Bin-full Sensor connector is connected properly. Reconnect it.
3) If the sensor is defective, replace it.

Code: S1-2411
Description: Error: #S1-2411 / HDD System Failure: #S1-2411. Turn off then on. Call for service if the problem persists
Causes: SD card is not installed correctly or is defective.
Troubleshooting Guides: 1) Turn the machine off then on.
2) If the problem persists, check the followings. a) Enter SVC mode. And then, format the SD card. (Service Mode > Service Functions > Format Mass Storage Device) b) If SD card is defective, replace it with new one. c) If the problem persists, replace the main board.

Code: S2-1110, S2-1210
Description: Error: #S2-1110 / Engine System Failure: #S2-1110. Call for service
Error: #S2-1210/ Engine System Failure: #S2-1210.Call for service
Causes: CPU in the main board has some problem.
Troubleshooting Guides: 1) Turn the machine off then on.
2) If the problem persists, replace the main board.

Code: S2-33xx
Description: No message
Causes: This error shows the engine status.
Troubleshooting Guides: • S2–3310 : The engine is warming up. • S2–3311 : The engine is ready. • S2–3312 : The engine is printing. • S2–3313 : The engine is in the power save state. • S2–3314 : The engine is in the error state. • S2–3315 : The engine is in the recovery state. • S2–3316 : The engine is waiting. • S2–3317 : The engine is in EDC mode. • S2–3318 : The engine is in low power mode. • S2–3319 : The engine is in ACR (Auto Color Registration) mode. • S2–331A : The engine is in image density control or image stabilization mode. When these errors display, wait until the message will be disappeared or turn the machine off then on.

Code: S2-4120
Description: Door open Close it
Causes: Door is open or the cover open switch is defective.
Troubleshooting Guides: 1) Check if the front cover is closed perfectly.
2) If the error persists, check that the cover-open sensor is working normally. If it is defective, replace the HVPS board.

Code: S3-3122
Description: Scanner Locked / Scanner is locked. Press Stop button
Causes: Scanner lock error has occurred. CIS does not move.
Troubleshooting Guides: 1) Check if the CIS unit is moving when power on.
2) Check if the flat cable is connected to the CIS unit properly. Re-connect or replace the cable.
3) If the CIS is defective, replace it.
4) Check if there is any defective part in the scanner unit. (Gear, Belt, Motor etc.)
5) If the problem persists, replace the main board.

Code: S4-3140
Description: Error: #S4-3140 / Fax Failure: #S4-3140. Turn off then on. Call for service if the problem persists
Causes: The fax modem is defective.
Troubleshooting Guides: 1) Turn the machine off then on.
2) If the problem persists, check the followings. a) Check if the communication line is normal. Reconnect the fax line to the another fax devcie and test it. b) If the fax line is normal, check the connection between the fax board and main board in the machine. c) Reconnect the harness. d) If the problem persists, replace the fax board. e) If the problem persists, replace the main board.

Code: S6-3113
Description: Error: #S6-3113 / Network Failure: #S6-3113. Turn off then on. Call for service if the problem persists
Causes: Network PHY chip is defective.
Troubleshooting Guides: 1) Turn the machine off then on. 2) If the problem persists, replace the main board.

Code: S6-3123
Description: IP Conflict / This IP address conflicts with that of other system
Causes: IP address conflicts with that of other system. / There is no response when checking the ping test.
Troubleshooting Guides: Change the machine’s IP address.
• Set-up the IP address in this order, Network -> TCP/IP (IPv4) -> STATIC.
• In case of DHCP or Bootp, reboot the machine to receive a new IP address.

Code: S6-3128
Description: 802.1x Network Error / 802.1x Network Error. Contact the Admin
Causes: The confirmation was requested for wired port, the server has rejected. / The confirmation protocol is not the same or user information (ID/Password) is wrong.
Troubleshooting Guides: Check the setting-up for 802.1x confirmation server. • Re-enter the server information and confirmation protocol. • Re-enter the user information.

Code: S6-3231
Description: Error: #S6-3231 / Can not find a wireless network. Please check the wireless environment
Causes: The machine can not find the SSID (Service Set Identifier).
Troubleshooting Guides: 1) Check the setting-up for wireless network.

Code: S6-3232
Description: Error: #S6-3232 / Wireless security settings are incorrect. Please change the settings
Causes: Wireless security settings like a WEP/WPA/WPA2 are incorrect.
Troubleshooting Guides: 1) Turn the machine and AP off then on.
2) Change the wireless network settings.

Code: S6-3233
Description: Error: #S6-3233 / Not connected from the wireless AP. If you do not reconnect automatically, check the wireless settings
Causes: Wireless BSSID value is 0 or wireless module is disconnected.
Troubleshooting Guides: 1) Turn the machine and AP off then on.
2) Change the wireless network settings.

Code: S6-3234
Description: Error: #S6-3234 / Failed connection to WPS. Try again or set up other wireless connection
Causes: WPS connection to AP is failed.
Troubleshooting Guides: 1) Retry the connection with WPS button.

Code: S6-3235, S6-3236
Description: Error: #S6-3235 / Wi-Fi Direct is not ready. Turn off then on. Call for service if the problem persists
Error: #S6-3236 / Failed to connect to Wi-Fi Direct. Turn off your mobile device and turn it on
Causes: Wi-Fi Direct library is initialized.
Troubleshooting Guides: 1) Turn the machine off then on. 2) Change the wireless network settings. Retry it.

Code: U1-21xx, U1-23xx
Description: Error: #U1-2xxx / Fuser Unit Failure: #U1-2xxx.Turn off then on. Call for service if the problem persists
Causes: The temperature control of fuser unit is abnormal.
Troubleshooting Guides: 1) Turn the machine off. Re-install the fuser unit. Then turn the machine on. Is the error message is disappeared?
2) If the problem persists, turn the machine off and remove the fuser unit. a) Check if the fuser connector is connected properly. b) Check if the input voltage is normal. c) Check if the thermistor is twisted or contaminated; and is in contact with the Heat Roller
3) After confirming continuity in the fuser connector and the problem still exists; order the SMPS and Fuser Unit and install as is necessary.

Code: U2-1111,U2-1112, U2-2112
Description: Error: #U2-xxxx Turn off then on
Causes: LSU Motor does not work normally or LSU H Sync signal is abnormal.
Troubleshooting Guides: 1) Execute the LSU motor test in SVC mode. Check LSU motor operation sound.
2) If there is no sound, remove the right cover. Check if the LSU harness is connected on the main board properly.
3) If it is OK, remove the top cover. Check if the LSU harness is connected on LSU board properly.
4) Check if the LSU harness is defective.
5) Reconnect the LSU harness and then execute the LSU motor test again.
6) If the problem persists, replace the LSU.
7) If the problem persists after replacing LSU, replace the main board.

Code: U2-2113,U2-3112, U2-3113
Description: Error: #U2-xxxx Turn off then on
Causes: LSU Motor does not work normally or LSU H Sync signal is abnormal.
Troubleshooting Guides: 1) Execute the LSU motor test in SVC mode. Check LSU motor operation sound.
2) If there is no sound, remove the right cover. Check if the LSU harness is connected on the main board properly.
3) If it is OK, remove the top cover. Check if the LSU harness is connected on LSU board properly.
4) Check if the LSU harness is defective.
5) Reconnect the LSU harness and then execute the LSU motor test again.
6) If the problem persists, replace the LSU.
7) If the problem persists after replacing LSU, replace the main board.

Code: U2-4112, U2-4113
Description: Error: #U2-xxxx Turn off then on
Causes: LSU Motor does not work normally or LSU H Sync signal is abnormal.
Troubleshooting Guides: 1) Execute the LSU motor test in SVC mode. Check LSU motor operation sound.
2) If there is no sound, remove the right cover. Check if the LSU harness is connected on the main board properly.
3) If it is OK, remove the top cover. Check if the LSU harness is connected on LSU board properly.
4) Check if the LSU harness is defective.
5) Reconnect the LSU harness and then execute the LSU motor test again.
6) If the problem persists, replace the LSU.
7) If the problem persists after replacing LSU, replace the main board.

Code: U2-5112, U2-5113
Description: Error: #U2-xxxx Turn off then on
Causes: LSU Motor does not work normally or LSU H Sync signal is abnormal.
Troubleshooting Guides: 1) Execute the LSU motor test in SVC mode. Check LSU motor operation sound.
2) If there is no sound, remove the right cover. Check if the LSU harness is connected on the main board properly.
3) If it is OK, remove the top cover. Check if the LSU harness is connected on LSU board properly.
4) Check if the LSU harness is defective.
5) Reconnect the LSU harness and then execute the LSU motor test again.
6) If the problem persists, replace the LSU.
7) If the problem persists after replacing LSU, replace the main board.

Code: U3-3313, U3-3314, U3-3413
Description: Original paper jam
Causes: A document jam was detected in the ADF unit.
Troubleshooting Guides: 1) Remove the jammed paper from ADF unit.
2) If the error persists, turn the machine off then on.
3) If the document jam occurs continually, open the ADF cover-top. Check if the ADF pick up roller is contaminated or worn out. Clean or replace it.
4) If the pick up roller is OK, check the followings. a) Check if the ADF motor is working normally. b) Check if the connector on the ADF joint board is connected correctly.
5) If the problem persists, replace the ADF unit.

Code: U3-3513, U3-3514
Description: Original paper jam
Causes: A document jam was detected in the ADF unit.
Troubleshooting Guides: 1) Remove the jammed paper from ADF unit.
2) If the error persists, turn the machine off then on.
3) If the document jam occurs continually, open the ADF cover-top. Check if the ADF pick up roller is contaminated or worn out. Clean or replace it.
4) If the pick up roller is OK, check the followings. a) Check if the ADF motor is working normally. b) Check if the connector on the ADF joint board is connected correctly.
5) If the problem persists, replace the ADF unit.

– Get more information about Epson XP 15000 troubleshooting, click here

– Get more error code list with quick guide to fix printer product, click here

– About get help with reseting Epson inkpad or others, click here

Samsung printer reset software introduction:

Notes before resetting Samsung printer:

– Identify accurate version, serial and crum of Samsung printer.
– How to get Samsung printer model info: Click Here
– Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.
– It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.
– And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the “UPS” (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
– This firmware will be installed directly to your printer. Before opening firmare link make sure that printer is turned on and connected to your computer and printer drivers are installed correctly.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!

How To Run Firmware Fix Samsung printer

1. Connect the printer to the computer and turn it on.
2. Wait until the printer is ready for work.
3. Drag and drop *.hd to usbprns2.exe file.

4. The reprogramming process starts automatically.
5. Wait until the printer reprograms (10-20 minute) and restarts.
6. After that the reprogramming process is finished, restart the printer.

Contact us to get support with Samsung ProXpress C3060FW Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.

Samsung ProXpress C3060FW model and fix error codes list