Samsung ML5050G model and fix error codes list
– Compatible Printer model: Samsung ML5050G
– Samsung ML5050G Error Codes with quick guides:
- Code: 00 … 04
- Description: Ready(paper type)
- Causes: The printer is in printable state. The paper type is sensed after one page printing.
- Code: 20
- Description: Print Start
- Causes: The code is displayed when engine controller is received OPRINTO command from the video controller.
- Code: 30
- Description: Feed Sensor On
- Causes: It means that paper is passing the feed sensor.
- Code: 40
- Description: Feed Sensor Off
- Causes: It means that paper passed the feed sensor.
- Code: 50
- Description: Paper out
- Causes: It means that paper passed the exit sensor.
- Code: 60, 62, 68
- Description: Fuser Error
- Causes: These codes mean the fuser error status. Heat lamp, thermistor, thermostat open or thermistor short. The Low Temperature Error is checked when the printer is printing.
- Code: 61
- Description: Warm up
- Causes: The printer warms up when the printer is turned on or the cover is closed, or wake from sleep mode.
- Code: 64
- Description: Cover Open
- Causes: The printer cover open or no toner cartridge in the machine.
- Code: 69
- Description: Sleep Mode
- Causes: It means that the printer fuser is turned off, and the power consumption is minimized.
- Code: 70
- Description: No Paper
- Causes: The paper is not loaded in the printer paper tray.
- Code: 71
- Description: Paper Jam 0
- Causes: Displays when the paper leading edge stops between the pick-up unit and the feed sensor.
- Code: 72
- Description: Paper Jam 1
- Causes: Displays when the paper leading edge stops between the feed sensor and the exit sensor.
Solve Samsung ML5050G Error codes
- Code: 73
- Description: Paper Jam 2
- Causes: Displays when the paper leading edge stops after the exit sensor.
- Code: 95
- Description: LSU Not Ready
- Causes: The LSU scanner motor is not ready or Hsync signal is not output.
– Get more information about Epson XP 15000 troubleshooting, click here
– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here
Samsung printer reset software introduction:
Notes before resetting Samsung printer:
– Identify accurate version, serial and crum of Samsung printer.
– How to get Samsung printer model info: Click Here
– Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.
– It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.
– And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the “UPS” (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
– This firmware will be installed directly to your printer. Before opening firmare link make sure that printer is turned on and connected to your computer and printer drivers are installed correctly.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!
How To Run Firmware Fix Samsung printer
1. Connect the printer to the computer and turn it on.
2. Wait until the printer is ready for work.
3. Drag and drop *.hd to usbprns2.exe file.
4. The reprogramming process starts automatically.
5. Wait until the printer reprograms (10-20 minute) and restarts.
6. After that the reprogramming process is finished, restart the printer.
Contact us to get support with Samsung ML5050G Error case
Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.
