Samsung ML1665 model and fix error codes list
– Compatible Printer model: Samsung ML1665
– Samsung ML1665 Error Codes with quick guides:
- Code: 1-1130
- Display: SMART PANEL:End of life, Replace with new toner cartridge
- Description: 1. The toner cartridge has reached its estimated cartridge life. Print the supplies information report. And check the life count.
- Troubleshooting Guides: 1. Open the Cover-Exit. 2. Replace the toner cartridge. 3. Close the Cover-Exit.
- Code: C1-1110
- Display: SMART PANEL:Prepare new toner cartridge
- Description: 1. The toner cartridge has reached its estimated cartridge life.
- Troubleshooting Guides: 1. Open the Cover-Exit. 2. Replace the toner cartridge. 3. Close the Cover-Exit.
- Code: C1-1120
- Display: SMART PANEL:End of life, Replace with new toner cartridge
- Description: 1. The toner cartridge has reached its estimated cartridge life.
- Troubleshooting Guides: 1. Open the Cover-Exit. 2. Replace the toner cartridge. 3. Close the Cover-Exit.
- Code: C1-1411
- Display: SMART PANEL:Toner cartridge is not installed. Install the cartridge.
- Description: 1. The toner cartridge is installed improperly, or not installed.
- Troubleshooting Guides: 1. Open the Cover-Exit. 2. Reinstall the toner cartridge two or three times to confirm it is seated properly. 3. Close the Cover-Exit.
- Code: C1-1512
- Display: SMART PANEL:Toner cartridge is not compatible. Check users guide
- Description: 1. Ther toner cartridge is not suitable for your machine. 2. The print job can’t be executed.
- Troubleshooting Guides: 1. Prepare the Samsung-genuine toner cartridge. 2. Open the Cover-Exit. 3. Replace the toner cartridge. 4. Close the Cover-Exit.
- Code: M1-1113
- Display: SMART PANEL:Paper jam in tray 1.
- Description: 1. Paper has jammed. (The paper has not reached the feed1 sensor within normal time after picking up it from the tray.)
- Troubleshooting Guides: 1. Remove all papers on the tray. Remove the jammed paper from the machine. And reload the papers on the tray. 2. Adjust the paper guide to fix the papers. 3. Check the maximum paper capacity of the tray. Remove excess paper from the tray.
- Code: M2-1211
- Display: SMART PANEL:
- Description: 1. Paper has jammed. (In case that the printer has turned on after turned it off for printing job or pick-up.)
- Troubleshooting Guides: 1. Open the top cover. Check if the paper has jammed. If there is the jammed paper, remove it. 2. If the error message in Smart Panel is not disappered, check the Regi sensor and actuator. If they are defective, replace them.
- Code: S2-4110
- Display: SMART PANEL:Door is open. Close it.
- Description: 1. Error LED on the control pane is blinking because the main door is opened.
- Troubleshooting Guides: 1. Close the cover unit it locks into place. 2. If the problem persists, check the cover open sensor that is located on the HVPS board.
- Code: U1-1211
- Display: SMART PANEL:Fuser Unit Failure : #U1-1211. Turn off then on.
- Description: 1. The fuser unit is defective. 2. The SMPS Triac is defective. 3. The main board is defective. Using an incorrect type of paper may create a fusing error. Please use only paper that meets the specifications required by the machine.
- Troubleshooting Guides: 1. Remove the both side covers. 2. Remove the screw from the rear. 3. Remove the Cover-Top. 4. Remove the Cover-Exit. 5. Remove the matal plate after unplugging the fuser connector. 6. Replace the fuser unit after removing the screw. 7. The assembly is reverse order of disjointing.
- Code: U1-2121
- Display: SMART PANEL:Fuser Unit Failure : #U1-2121. Turn off then on.
- Description: 1. The fuser unit is defective. 2. The SMPS Triac is defective. 3. The main board is defective. Using an incorrect type of paper may create a fusing error. Please use only paper that meets the specifications required by the machine.
- Troubleshooting Guides: 1. Remove the both side covers. 2. Remove the screw from the rear. 3. Remove the Cover-Top. 4. Remove the Cover-Exit. 5. Remove the metal plate after unplugging the fuser connector. 6. Replace the fuser unit after removing the screw. 7. The assembly is reverse order of disjointing.
- Code: U2-1112
- Display: SMART PANEL:LSU Unit Failure: #U2-1112. Turn off then on.
- Description: 1. An error between the LSU(Laser Scanning Unit) and the control circuit of the Main board has occurred.
- Troubleshooting Guides: 1. Check the LSU connector. 2. Replace the LSU. 3. If the problem persists, replace the main board.
- Code: U2-1114
- Display: SMART PANEL:LSU Failure: #U2-1114. Turn off then on.
- Description: 1. An error between the LSU(Laser Scanning Unit) and the control circuit of the Main board has occurred.
- Troubleshooting Guides: 1. Check the LSU connector. 2. Replace the LSU. 3. If the problem persists, replace the main board.
Solve Samsung ML1665 Error codes
– Get more information about Epson XP 15000 troubleshooting, click here
– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here
Samsung printer reset software introduction:
Notes before resetting Samsung printer:
– Identify accurate version, serial and crum of Samsung printer.
– How to get Samsung printer model info: Click Here
– Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.
– It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.
– And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the “UPS” (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
– This firmware will be installed directly to your printer. Before opening firmare link make sure that printer is turned on and connected to your computer and printer drivers are installed correctly.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!
How To Run Firmware Fix Samsung printer
1. Connect the printer to the computer and turn it on.
2. Wait until the printer is ready for work.
3. Drag and drop *.hd to usbprns2.exe file.
4. The reprogramming process starts automatically.
5. Wait until the printer reprograms (10-20 minute) and restarts.
6. After that the reprogramming process is finished, restart the printer.
Contact us to get support with Samsung ML1665 Error case
Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.