Samsung CLX6200FX model and fix error codes list

Samsung CLX6200FX model and fix error codes list

– Compatible Printer model: Samsung CLX6200FX
– Samsung CLX6200FX Error Codes with quick guides:

• Code: 01
• Display: [COMM. Error]
• Description: The machine has a communication problem.
• Troubleshooting Guides: Ask the sender to try again.

• Code: 02
• Display: [Incompatible]
• Description: The machine has received a fax from which is registered as a junk fax.
• Troubleshooting Guides: The received fax data will be deleted. Reconfirm junk fax setup.

• Code: 03
• Display: [Line Error]
• Description: Your machine cannot connect with the receiving fax machine or has lost contact because of a problem with the phone line.
• Troubleshooting Guides: Try again. If the problem persists, wait an hour or so for the line to clear and try again. Or, turn the ECM mode on.

• Code: 04
• Display: [No Answer]
• Description: The receiving fax machine has not answered after several redial attempts.
• Troubleshooting Guides: Try again. Make sure that the receiving machine is operational.

• Code: 05
• Display: [Stop Pressed]
• Description: Stop/Clear has been pressed during an operation.
• Troubleshooting Guides: Try again.

• Code: 06
• Display: [yyy] Paper Empty
• Description: There is no paper in the tray.
• Troubleshooting Guides: Load paper in the tray.

• Code: 07
• Display: [yyy] Paper Mismatch
• Description: The paper size specified in the printer properties does not match the paper you are loading.
• Troubleshooting Guides: Load the correct paper in the tray.

• Code: 08
• Display: [yyy] Cassette Out
• Description: The tray cassette is not properly closed.
• Troubleshooting Guides: To close the tray, lower the rear edge, align it with the slot, and slide it into the printer.

• Code: 09
• Display: Adjusting… Registration
• Description: The machine is adjusting the color registration
• Troubleshooting Guides: Wait a few minutes.

• Code: 10
• Display: Authentication Failure
• Description: The ID or password you entered is incorrect.
• Troubleshooting Guides: Enter the correct ID or password.

• Code: 11
• Display: Cancel?
• Description: Your machine’s memory has become full while trying to store an original into memory.
• Troubleshooting Guides: To cancel the fax job, press the OK button to accept Yes. If you want to send those pages that have been successfully stored, press the OK button to accept No. You should send the remaining pages later, when memory is available.

• Code: 12
• Display: Connection Error
• Description: Connection with the SMTP server failed.
• Troubleshooting Guides: Check the server settings and the network cable.

Solve Samsung CLX6200FX Error codes

• Code: 13
• Display: Connection Failed
• Description: The protocol you have entered is not supported or server port is wrong.
• Troubleshooting Guides: Check the protocol or server port.

• Code: 14
• Display: DADF Cover Open Error
• Description: The DADF cover is not securely latched.
• Troubleshooting Guides: Close the DADF cover until it locks into place.

• Code: 15
• Display: Data Read Fail Check USB Mem.
• Description: Time expired while reading data.
• Troubleshooting Guides: Try again.

• Code: 16
• Display: Data Write Fail Check USB Mem.
• Description: Storing to the USB memory failed.
• Troubleshooting Guides: Check the available USB memory space.

• Code: 17
• Display: Document Jam
• Description: The loaded original has jammed in the DADF (or ADF).
• Troubleshooting Guides: Clear the jam.

• Code: 18
• Display: Door Open/Check Transfer Belt
• Description: The front cover is not securely latched.
• Troubleshooting Guides: Close the cover until it locks into place.

• Code: 19
• Display: Duplex Jam 0 Check Inside
• Description: Paper has jammed during duplex printing. This is applicable only to machines with this feature.
• Troubleshooting Guides: Clear the jam.

• Code: 20
• Display: Duplex Jam 1 Open/Close Door
• Description: Paper has jammed during duplex printing. This is applicable only to machines with this feature.
• Troubleshooting Guides: Clear the jam.

• Code: 21
• Display: Enter Again
• Description: You entered an unavailable item.
• Troubleshooting Guides: Enter the correct item again.

• Code: 22
• Display: File Access Denied
• Description: Login to the network server was successful. However, access to the file on the network server was denied.
• Troubleshooting Guides: Change the server settings.

• Code: 23
• Display: File Format Not Supported
• Description: The selected file format is not supported.
• Troubleshooting Guides: Use the correct file format.

• Code: 24
• Display: File Name Exist
• Description: The file name you have entered already exists.
• Troubleshooting Guides: Enter a different file name.

• Code: 25
• Display: File Name Over Limit
• Description: The file names you can use are from doc001 to doc999. However, all file names are used already.
• Troubleshooting Guides: Delete unnecessary files.

• Code: 26
• Display: Fuser Fan Locked
• Description: There is a problem in the cooling fan of the machine.
• Troubleshooting Guides: Open and then close the front cover.

• Code: 27
• Display: Global Address Not Found
• Description: When the device is unable to locate the given address of the Global server.
• Troubleshooting Guides: Check the search ID.

• Code: 28
• Display: Global Query Size Exceeded.
• Description: This is an error message and displays when the global query size has been exceeded.
• Troubleshooting Guides: There are too many search results. Refine your search by entering more letters. Contact a LDAP server administrator.

• Code: 29
• Display: Global Server Auth Failed
• Description: When there is a authentication fail while connecting to the global server this message displays.
• Troubleshooting Guides: Check the authentication account and password.

• Code: 30
• Display: Global Server Not Configured
• Description: When no global server is configured, this message displays.
• Troubleshooting Guides: Check the LDAP server configuration settings.

• Code: 31
• Display: Global Server Not Found
• Description: When the device is unable to find the Global server.
• Troubleshooting Guides: Check the LDAP server address, The LDAP server address is incorrect, or the server has failed.

• Code: 32
• Display: Global Server Query Timeout
• Description: Network Information Center (NIC) failed to get the proper response from the LDAP server within specified time.
• Troubleshooting Guides: Check the LDAP server setting, LDAP server setting is incorrect.

• Code: 33
• Display: Global Server Comm Error
• Description: This error message displays when there is a communication error between the global server and the device.
• Troubleshooting Guides: Try again. Contact a LDAP Server administrator.

• Code: 34
• Display: Group Not Available
• Description: You have tried to select a group location number where only a single location number can be used, such as when adding locations for a Multiple Send operation.
• Troubleshooting Guides: Use a speed dial number or dial a number manually using the number keypad.

• Code: 35
• Display: Install [xxx]
• Description: The corresponding part of the machine is not installed.
• Troubleshooting Guides: Install the part into your machine.

• Code: 36
• Display: Invalid [xxx]
• Description: The color part of the machine is not for your machine.
• Troubleshooting Guides: Install the a Samsung-genuine part designed for your machine.

• Code: 37
• Display: Install Toner
• Description: The color toner cartridge is not installed.
• Troubleshooting Guides: Install the color toner cartridge.

• Code: 38
• Display: Invalid Toner
• Description: The color toner cartridge you have installed is not for your machine.
• Troubleshooting Guides: Install the a Samsung-genuine color toner cartridge designed for your machine.

• Code: 39
• Display: Invalid Server Address
• Description: The server adress you have entered is invalid.
• Troubleshooting Guides: Enter the correct server address.

• Code: 40
• Display: IP Conflict
• Description: The network IP address you have set is being used by someone else.
• Troubleshooting Guides: Check the IP address and reset it if necessary.

• Code: 41
• Display: Line Busy
• Description: The receiving fax machine did not answer or the line is already engaged.
• Troubleshooting Guides: Try again after a few minutes.

• Code: 42
• Display: Low Power
• Description: The machine is in the previous stage of the power save mode.
• Troubleshooting Guides: When data is received, it switches to on-line automatically.

• Code: 43
• Display: Mail Exceeds Server Support
• Description: The mail size is larger than the supported size by SMTP server.
• Troubleshooting Guides: Divide your mail or reduce the resolution.

• Code: 44
• Display: Main Motor Locked
• Description: There is a problem in the main motor.
• Troubleshooting Guides: Open and then close the front cover.

• Code: 45
• Display: Load Manually Press Start Key
• Description: The multi-purpose tray is empty in manual feed mode.
• Troubleshooting Guides: Load paper in the multi-purpose tray.

• Code: 46
• Display: Memory Full
• Description: The memory is full.
• Troubleshooting Guides: Delete unnecessary fax jobs and retransmit after more memory becomes available. Alternatively, split the transmission into more than one operation.

• Code: 47
• Display: MP Tray Paper Jam 0
• Description: Paper has jammed in the feeding area of the multi-purpose tray.
• Troubleshooting Guides: Clear the jam.

• Code: 48
• Display: Network Error
• Description: There is a problem with the network.
• Troubleshooting Guides: Contact your network administrator.

• Code: 49
• Display: Not Assigned
• Description: The speed button or speed dial number you tried to use has no number assigned to it.
• Troubleshooting Guides: Enter the number manually using the number keypad or store the number or address.

• Code: 50
• Display: Not Available Try Again Later
• Description: Can not perform the task immediately because too many tasks are running at once.
• Troubleshooting Guides: Try again when current task is completed.

• Code: 51
• Display: Non SAMSUNG Toner
• Description: The color toner cartridge which the arrow indicates is not a Samsung-genuine cartridge. Press OK to toggle the message to Stop or Continue.
• Troubleshooting Guides: You can select either Stop or Continue with the left/right arrow. If you select Stop by pressing OK on the control panel, the machine stops printing. If you select Continue, the machine keeps printing, but the quality cannot be guaranteed. If you do not select any, the machine will work as Stop is selected. Replace the corresponding toner cartridge with a Samsung-genuine cartridge.

• Code: 52
• Display: One Page is Too Large
• Description: Single page data exceeds the configured mail size.
• Troubleshooting Guides: Reduce the resolution and try again.

• Code: 53
• Display: Operation Not Assigned
• Description: You are in the Add Page/Cancel Job operation, but there are no jobs stored.
• Troubleshooting Guides: Check the display to see if there are any scheduled jobs.

• Code: 54
• Display: Out-Bin Full
• Description: The output tray of the machine is full of paper.
• Troubleshooting Guides: Remove paper.

• Code: 55
• Display: Paper Jam 0 Open/Close Door
• Description: Paper has jammed in the feeding area of the tray.
• Troubleshooting Guides: Clear the jam.

• Code: 56
• Display: Paper Jam 1 Open/Close Door
• Description: Paper has jammed inside the machine.
• Troubleshooting Guides: Clear the jam.

• Code: 57
• Display: Paper Jam 2 Check Inside
• Description: Special print media has jammed in the paper exit area.
• Troubleshooting Guides: Clear the jam.

• Code: 58
• Display: Power Failure
• Description: Power has turned off then on and the machine’s memory has not been back up.
• Troubleshooting Guides: The job which you were trying to do before the power failure must be completely re-done.

• Code: 59
• Display: Remove Paper in Rear Cover
• Description: Paper has jammed in the paper rear cover area.
• Troubleshooting Guides: Clear the jam.

• Code: 60
• Display: Refilled Toner
• Description: The toner cartridge you have installed is not genuine or refilled.
• Troubleshooting Guides: The print quality may get poor if the refilled toner cartridge is installed, since its characteristics may significantly differ from the genuine. We recommend Samsung-genuine color toner cartridge.

• Code: 61
• Display: Replace Toner
• Description: This message appears between Toner Empty and Toner Low status.
• Troubleshooting Guides: Replace the toner cartridge with a new one.

• Code: 62
• Display: Replace [xxx]
• Description: The life of the part expires totally.
• Troubleshooting Guides: Replace the part with a new one.

• Code: 63
• Display: Replace [xxx] Soon
• Description: The life of the part expires soon.
• Troubleshooting Guides: Replace the part with a new one.

• Code: 64
• Display: Retry Redial?
• Description: The machine is waiting for a specified time interval to redial a previously busy station.
• Troubleshooting Guides: You can press OK to immediately redial, or Stop/Clear to cancel the redial operation.

• Code: 65
• Display: Reverse Jam 0 Check Inside
• Description: Paper has jammed in the paper fuser area and In the cover of reverse unit area.
• Troubleshooting Guides: Clear the jam.

• Code: 66
• Display: Reverse Jam 1 Check Inside
• Description: Paper has jammed In the cover of reverse unit area or in the rear cover.
• Troubleshooting Guides: Clear the jam.

• Code: 67
• Display: Scanner locked
• Description: The scanner module is locked
• Troubleshooting Guides: Unlock the scanner and press Stop/Clear.

• Code: 68
• Display: Self Diagnostics Temperature
• Description: The engine in your machine is checking problems detected.
• Troubleshooting Guides: Wait a few minutes.

• Code: 69
• Display: Self Diagnostics LSU
• Description: The LSU (Laser Scanning Unit) in your machine is checking problems detected.
• Troubleshooting Guides: Wait a few minutes.

• Code: 70
• Display: Send Error (AUTH)
• Description: There is a problem in SMTP authentication.
• Troubleshooting Guides: Configure the authentication setting.

• Code: 71
• Display: Send Error (DNS)
• Description: There is a problem in DNS.
• Troubleshooting Guides: Configure the DNS setting.

• Code: 72
• Display: Send Error (POP3)
• Description: There is a problem in POP3.
• Troubleshooting Guides: Configure the POP3 setting.

• Code: 73
• Display: Send Error (SMTP)
• Description: There is a problem in SMTP.
• Troubleshooting Guides: Change to the available server.

• Code: 74
• Display: Send Error (Wrong Config)
• Description: There is a problem on the network interface card.
• Troubleshooting Guides: Configure your network interface card correctly.

• Code: 75
• Display: Toner Empty
• Description: The color toner cartridge has run out. The machine stops printing. Press OK to toggle the message to Stop, Continueor Black Only. Stop If the black toner cartridge is empty, Black Only messagedoes not appear.
• Troubleshooting Guides: You can select the option among Stop, ontinue or Black Only with the left/right arrow. If you select Stop by pressing OK on the control panel, the machine stops printing. If you select Continue, the machine keeps printing, but the quality cannot be guaranteed. If you select Black Only, the machine prints the data in black. In this case, the mono printing feature is preset in the printer properties. When you copy, the Black Start button will be activated only with this condition. If you do not select any, the machine will work as Stop is selected. Replace the color toner cartridge with a new one.

• Code: 76
• Display: Toner Exhausted
• Description: The lifespan of the color toner cartridge which the arrow indicates is reached.
• Troubleshooting Guides: This message appears when the toner is completely empty, and your machine stops printing. Replace the corresponding toner cartridge with a Samsung-genuine cartridge.

• Code: 77
• Display: Toner Low
• Description: The corresponding color toner cartridge is almost empty.
• Troubleshooting Guides: Take out the toner cartridge and thoroughly shake it. By doing this, you can temporarily reestablish printing operations.

• Code: 78
• Display: Tray 2 Paper jam 0
• Description: Paper has jammed In the paper feed area.
• Troubleshooting Guides: Clear the jam.

– Get more information about Epson XP 15000 troubleshooting, click here

– Get more error code list with quick guide to fix printer product, click here

– About get help with reseting Epson inkpad or others, click here

Samsung printer reset software introduction:

Notes before resetting Samsung printer:

– Identify accurate version, serial and crum of Samsung printer.
– How to get Samsung printer model info: Click Here
– Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.
– It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.
– And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the “UPS” (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
– This firmware will be installed directly to your printer. Before opening firmare link make sure that printer is turned on and connected to your computer and printer drivers are installed correctly.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!

How To Run Firmware Fix Samsung printer

1. Connect the printer to the computer and turn it on.
2. Wait until the printer is ready for work.
3. Drag and drop *.hd to usbprns2.exe file.

4. The reprogramming process starts automatically.
5. Wait until the printer reprograms (10-20 minute) and restarts.
6. After that the reprogramming process is finished, restart the printer.

Contact us to get support with Samsung CLX6200FX Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.