Samsung CLX3175N model and fix error codes list

Samsung CLX3175N model and fix error codes list

– Compatible Printer model: Samsung CLX3175N
– Samsung CLX3175N Error Codes with quick guides:

• Code: 01
• Display: ADC Not Confirm Error
• Description: A problem has occurred in the ADC in the machine.
• Troubleshooting Guides: Turn the power switch off and on. If the problem persists, call for service.

• Code: 02
• Display: Cancel?
• Description: Your machine’s memory has become full while trying to store an original into memory.
• Troubleshooting Guides: To cancel the fax job, press the OK button to accept Yes. If you want to send those pages that have been successfully stored, press the OK button to accept No. You should send the remaining pages later, when memory is available.

• Code: 03
• Display: [COMM. Error]
• Description: The machine has a communication problem.
• Troubleshooting Guides: Ask the sender to try again.

• Code: 04
• Display: Connection Error
• Description: Connection with the SMTP server failed.
• Troubleshooting Guides: Check the server settings and the network cable.

• Code: 05
• Display: Data Read Fail Check USB Mem.
• Description: Time expired while reading data.
• Troubleshooting Guides: Try again.

• Code: 06
• Display: Data Write Fail Check USB Mem.
• Description: Storing to the USB memory failed.
• Troubleshooting Guides: Check the available USB memory space.

• Code: 07
• Display: Deve Home Sensor Error
• Description: There is a problem in the fuser unit.
• Troubleshooting Guides: Turn the power switch off and on. If the problem persists, call for service.

• Code: 08
• Display: [Document Jam]
• Description: The loaded original has jammed in the ADF.
• Troubleshooting Guides: Clear the jam.

• Code: 09
• Display: Door Open
• Description: The front cover or rear cover is not securely latched.
• Troubleshooting Guides: Close the cover until it locks into place.

• Code: 10
• Display: Enter Again
• Description: You entered an unavailable item.
• Troubleshooting Guides: Enter the correct item again.

• Code: 11
• Display: File Format Not Supported
• Description: The selected file format is not supported.
• Troubleshooting Guides: Use the correct file format.

• Code: 12
• Display: Group Not Available
• Description: You have tried to select a group location number where only a single location number can be used, such as when adding locations for a Multiple Send operation.
• Troubleshooting Guides: Use a speed dial number or dial a number manually using the number keypad.

Solve Samsung CLX3175N Error codes

• Code: 13
• Display: Install Imaging Unit
• Description: The imaging unit is not installed.
• Troubleshooting Guides: Install the imaging unit.

• Code: 14
• Display: Install Toner
• Description: The toner cartridge is not installed.
• Troubleshooting Guides: Install the toner cartridge.

• Code: 15
• Display: Invalid Toner
• Description: The toner cartridge you have installed is not for your machine.
• Troubleshooting Guides: Install the a Samsunggenuine toner cartridge designed for your machine.

• Code: 16
• Display: [Incompatible]
• Description: The machine has received a fax from which is registered as a junk fax.
• Troubleshooting Guides: The received fax data will be deleted. Reconfirm junk fax setup.

• Code: 17
• Display: IP Conflict
• Description: The network IP address you have set is being used by someone else.
• Troubleshooting Guides: Check the IP address and reset it if necessary.

• Code: 18
• Display: Line Busy
• Description: The receiving fax machine did not answer or the line is already engaged.
• Troubleshooting Guides: Try again after a few minutes.

• Code: 19
• Display: [Line Error]
• Description: Your machine cannot connect with the receiving fax machine or has lost contact because of a problem with the phone line.
• Troubleshooting Guides: Try again. If the problem persists, wait an hour or so for the line to clear and try again. Or, turn the ECM mode on.

• Code: 20
• Display: Low Heat Error Cycle Power
• Description: There is a problem in the fuser unit.
• Troubleshooting Guides: Turn the power switch off and on. If the problem persists, call for service.

• Code: 21
• Display: LSU Motor Error Cycle Power
• Description: A problem has occurred in the LSU (Laser Scanning Unit.)
• Troubleshooting Guides: Turn the power switch off and on. If the problem persists, call for service.

• Code: 22
• Display: LSU Hsync Error Cycle Power
• Description: A problem has occurred in the LSU (Laser Scanning Unit.)
• Troubleshooting Guides: Turn the power switch off and on. If the problem persists, call for service.

• Code: 23
• Display: Mail Exceeds Server Support
• Description: The mail size is larger than the supported size by SMTP server.
• Troubleshooting Guides: Divide your mail or reduce the resolution.

• Code: 24
• Display: Main Motor Locked
• Description: There is a problem in the main motor.
• Troubleshooting Guides: Open and then close the front cover.

• Code: 25
• Display: Memory Full
• Description: The memory is full.
• Troubleshooting Guides: Delete unnecessary fax jobs and retransmit after more memory becomes available. Alternatively, split the transmission into more than one operation.

• Code: 26
• Display: Network Error
• Description: There is a problem with the network.
• Troubleshooting Guides: Contact your network administrator.

• Code: 27
• Display: [No Answer]
• Description: The receiving fax machine has not answered after several redial attempts.
• Troubleshooting Guides: Try again. Make sure that the receiving machine is operational.

• Code: 28
• Display: Non SAMSUNG Toner
• Description: The toner cartridge which the arrow indicates is not a Samsung-genuine cartridge. Press OK to toggle the message to Stop or Continue.
• Troubleshooting Guides: You can select either Stop or Continue with the left/right arrow. If you select Stop by pressing OK on the control panel, the machine stops printing. If you select Continue, the machine keeps printing, but the quality cannot be guaranteed. If you do not select any, the machine will work as Stop is selected. Replace the corresponding toner cartridge with a Samsung-genuine cartridge.

• Code: 29
• Display: Not Assigned
• Description: The speed button or speed dial number you tried to use has no number assigned to it.
• Troubleshooting Guides: Enter the number manually using the number keypad or store the number or address.

• Code: 30
• Display: One Page is Too Large
• Description: Single page data exceeds the configured mail size.
• Troubleshooting Guides: Reduce the resolution and try again.

• Code: 31
• Display: Open Heat Error Cycle Power
• Description: There is a problem in the fuser unit.
• Troubleshooting Guides: Turn the power switch off and on. If the problem persists, call for service.

• Code: 32
• Display: Operation Not Assigned
• Description: You are in the Add Page/Cancel Job operation, but there are no jobs stored.
• Troubleshooting Guides: Check the display to see if there are any scheduled jobs.

• Code: 33
• Display: Out-Bin Full
• Description: The output tray of the machine is full of paper.
• Troubleshooting Guides: Remove paper.

• Code: 34
• Display: Over Heat Error Cycle Power
• Description: There is a problem in the fuser unit.
• Troubleshooting Guides: Turn the power switch off and on. If the problem persists, call for service.

• Code: 35
• Display: Paper Jam 0 Open/Close Door
• Description: Paper has jammed in the feeding area of the tray.
• Troubleshooting Guides: Clear the jam.

• Code: 36
• Display: Paper Jam 1 Check Inside
• Description: Paper has jammed in the paper exit area.
• Troubleshooting Guides: Clear the jam.

• Code: 37
• Display: Paper Jam 2 Check Inside
• Description: Paper has jammed In the fuser area or around the toner cartridge
• Troubleshooting Guides: Clear the jam.

• Code: 38
• Display: Refilled Toner
• Description: The toner cartridge you have installed is not genuine or refilled. The arrow indicates which color toner cartridge.
• Troubleshooting Guides: The print quality may get poor if the refilled toner cartridge is installed, since its characteristics may significantly differ from the genuine. We recommend Samsunggenuine color toner cartridge.

• Code: 39
• Display: Replace Toner
• Description: This message appears between Toner Empty and Toner Low status.
• Troubleshooting Guides: Replace the toner cartridge with a new one.

• Code: 40
• Display: Replace [xxx]
• Description: The life of the part expires totally.
• Troubleshooting Guides: Replace the part with a new one. Call for service.

• Code: 41
• Display: Replace [xxx] Soon
• Description: The life of the part expires soon.
• Troubleshooting Guides:

• Code: 42
• Display: Replace/Install Toner Waste Bin
• Description: The life span of the waste toner tank has expired and the printer will stop printing until a new waste toner tank is placed into the machine.
• Troubleshooting Guides: Replace the waste toner bank with a new one.

• Code: 43
• Display: Retry Redial?
• Description: The machine is waiting for a specified time interval to redial a previously busy station.
• Troubleshooting Guides: You can press OK to immediately redial, or Stop/Clear to cancel the redial operation.

• Code: 44
• Display: Scan Unit Open
• Description: The scan unit is not securely latched.
• Troubleshooting Guides: Close the scan unit it locks into place.

• Code: 45
• Display: Scanner locked
• Description: The scanner module is locked
• Troubleshooting Guides: Turn the power switch off and on. If the problem persists, call for service.

• Code: 46
• Display: Send Error (AUTH)
• Description: There is a problem in SMTP authentication.
• Troubleshooting Guides: Configure the authentication setting.

• Code: 47
• Display: Send Error (DNS)
• Description: There is a problem in DNS.
• Troubleshooting Guides: Configure the DNS setting.

• Code: 48
• Display: Send Error (POP3)
• Description: There is a problem in POP3.
• Troubleshooting Guides: Configure the POP3 setting.

• Code: 49
• Display: Send Error (SMTP)
• Description: There is a problem in SMTP.
• Troubleshooting Guides: Change to the available server.

• Code: 50
• Display: Send Error (Wrong Config)
• Description: There is a problem on the network interface card.
• Troubleshooting Guides: Configure your network interface card correctly.

• Code: 51
• Display: [Stop Pressed]
• Description: Stop/Clear has been pressed during an operation.
• Troubleshooting Guides: Try again.

• Code: 52
• Display: Toner Empty
• Description: The toner cartridge has run out. The machine stops printing. Press OK to toggle the message to Stop or Continue or Black Only.
• Troubleshooting Guides: You can select the option among Stop, Continue or Black Only with the left/right arrow. If you select Stop by pressing OK on the control panel, the machine stops printing. If you select Continue, the machine keeps printing, but the quality cannot be guaranteed. If you select Black Only, the machine prints the data in black. In this case, the mono printing feature is preset in the printer properties. When you copy, the Black Start button will be activated only with this condition. If you do not select any, the machine will work as Stop is selected. Replace the toner cartridge with a new one.

• Code: 53
• Display: Toner Exhausted
• Description: The lifespan of the toner cartridge which the arrow indicates is reached.
• Troubleshooting Guides: This message appears when the toner is completely empty, and your machine stops printing. Replace the corresponding toner cartridge with a Samsung-genuine cartridge

• Code: 54
• Display: Toner Low
• Description: The corresponding toner cartridge is almost empty.
• Troubleshooting Guides: Take out the toner cartridge and thoroughly shake it. By doing this, you can temporarily reestablish printing operations.

• Code: 55
• Display: Transfer Belt Error
• Description: A problem has occurred in the transfer belt in the machine.
• Troubleshooting Guides: Turn the power switch off and on. If the problem persists, call for service.

• Code: 56
• Display: Tray Paper Empty
• Description: There is no paper in the tray.
• Troubleshooting Guides: Load paper in the tray.

• Code: 57
• Display: Tray Paper Mismatch
• Description: The paper size specified in the printer properties does not match the paper you are loading.
• Troubleshooting Guides: Load the correct paper in the tray.

– Get more information about Epson XP 15000 troubleshooting, click here

– Get more error code list with quick guide to fix printer product, click here

– About get help with reseting Epson inkpad or others, click here

Samsung printer reset software introduction:

Notes before resetting Samsung printer:

– Identify accurate version, serial and crum of Samsung printer.
– How to get Samsung printer model info: Click Here
– Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.
– It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.
– And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the “UPS” (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
– This firmware will be installed directly to your printer. Before opening firmare link make sure that printer is turned on and connected to your computer and printer drivers are installed correctly.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!

How To Run Firmware Fix Samsung printer

1. Connect the printer to the computer and turn it on.
2. Wait until the printer is ready for work.
3. Drag and drop *.hd to usbprns2.exe file.

4. The reprogramming process starts automatically.
5. Wait until the printer reprograms (10-20 minute) and restarts.
6. After that the reprogramming process is finished, restart the printer.

Contact us to get support with Samsung CLX3175N Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.