Samsung CLX2160 model and fix error codes list

Samsung CLX2160 model and fix error codes list

– Compatible Printer model: Samsung CLX2160
– Samsung CLX2160 Error Codes with quick guides:

• Code: 01
• Display: Toner Empty
• Description: The color toner cartridge has run out. The machine stops printing. The arrow indicates which color toner cartridge.
• Troubleshooting Guides: Replace the color toner cartridge with a new one.

• Code: 02
• Display: Toner Low
• Description: The corresponding color toner cartridge is almost empty. The arrow indicates which color toner cartridge.
• Troubleshooting Guides: Take out the toner cartridge and thoroughly shake it. By doing this, you can temporarily reestablish printing operations.

• Code: 03
• Display: TonerSupply Err.
• Description: The machine received several papers with many images, and it can not supply the toner properly. The arrow indicateswhich color toner cartridge.
• Troubleshooting Guides: Unplug the power cord and plug it back in.

• Code: 04
• Display: Data Read Fail Check USB Mem.
• Description: Time expired while reading data.
• Troubleshooting Guides: Try again.

• Code: 05
• Display: Data Write Fail Check USB Mem.
• Description: Storing to the USB memory failed.
• Troubleshooting Guides: Check the available USB memory space.

• Code: 06
• Display: Door Open
• Description: The front cover or rear cover is not securely latched.
• Troubleshooting Guides: Close the cover until it locks into place.

• Code: 07
• Display: File Format Not Supported
• Description: The selected file format is not supported.
• Troubleshooting Guides: Use the correct file format.

• Code: 08
• Display: Fuser Fan Locked
• Description: There is a problem in the cooling fan of the machine.
• Troubleshooting Guides: Open and then close the front cover.

• Code: 09
• Display: Install Toner
• Description: The color toner cartridge is not installed. The arrow indicates which color toner cartridge.
• Troubleshooting Guides: Install the color toner cartridge.

• Code: 10
• Display: Install Imaging Unit Invalid Toner
• Description: The corresponding Imaging Unit of the machine is not installed. The color toner cartridge you have installed is not for your machine. The arrow indicates which color toner cartridge.
• Troubleshooting Guides: Install Imaging Unit into your machine. Install the a Samsung-genuine color toner cartridge designed for your machine.

• Code: 11
• Display: Invalid Imaging Unit
• Description: The Imaging Unit of the machine is not for your machine.
• Troubleshooting Guides: Install the a Samsung-genuine part designed for your machine.

• Code: 12
• Display: Low Heat Error Cycle Power.
• Description: There is a problem in the fuser unit.
• Troubleshooting Guides: Unplug the power cord and plug it back in.

Solve Samsung CLX2160 Error codes

• Code: 13
• Display: LSU Hsync Error Cycle Power
• Description: A problem has occurred in the LSU (Laser Scanning Unit).
• Troubleshooting Guides: Unplug the power cord and plug it back in.

• Code: 14
• Display: LSU Motor Error Cycle Power
• Description: A problem has occurred in the LSU (Laser Scanning Unit).
• Troubleshooting Guides: Unplug the power cord and plug it back in.

• Code: 15
• Display: Main Motor Locked
• Description: There is a problem in the main motor.
• Troubleshooting Guides: Open and then close the front cover.

• Code: 16
• Display: Manual Feeder Paper Empty
• Description: There is no paper in the manual feeder.
• Troubleshooting Guides: Load paper in the manaul feeder.

• Code: 17
• Display: Manual Feeder Paper Jam 0
• Description: Paper has jammed in the feeding area of the manual feeder.
• Troubleshooting Guides: Clear the jam.

• Code: 18
• Display: Not Enough Space In USB Memory
• Description: The space for USB memory device is not enough, which is for scanning and saving.
• Troubleshooting Guides: Check the available USB memory space.

• Code: 19
• Display: Open Heat Error Cycle Power
• Description: There is a problem in the fuser unit.
• Troubleshooting Guides: Unplug the power cord and plug it back in.

• Code: 20
• Display: Out-Bin Full
• Description: The output tray of the machine is full of paper
• Troubleshooting Guides: Remove paper.

• Code: 21
• Display: Over Heat Error Cycle Power
• Description: There is a problem in the fuser unit.
• Troubleshooting Guides: Unplug the power cord and plug it back in.

• Code: 22
• Display: Paper Jam 0 Open/Close Door
• Description: Paper has jammed in the feeding area of the tray.
• Troubleshooting Guides: Clear the jam.

• Code: 23
• Display: Paper Jam 1 Open/Close Door
• Description: Paper has jammed in the paper exit area.
• Troubleshooting Guides: Clear the jam.

• Code: 24
• Display: Paper Jam 2 Check Inside
• Description: Paper has jammed In the fuser area or around the toner cartridge
• Troubleshooting Guides: Clear the jam.

• Code: 25
• Display: Tray Paper Mismatch
• Description: The paper size specified in the printer properties does not match the paper you are loading.
• Troubleshooting Guides: Load the correct paper in the tray 1.

• Code: 26
• Display: Refilled Toner
• Description: The toner cartridge you have installed is not genuine or refilled. The arrow indicateswhich color toner cartridge.
• Troubleshooting Guides: The print quality may get poor if the refilled toner cartridge is installed, since its characteristics may significantly differ from the genuine. We recommend Samsung-genuine color toner cartridge.

• Code: 27
• Display: Replace Toner
• Description: This message appears between Toner Empty and Toner Low status. The arrow indicates which color toner cartridge.
• Troubleshooting Guides: Replace the toner cartridge with a new one.

• Code: 28
• Display: Replace [zzz] * zzz indicates the part of the machine.
• Description: The life of the part expires totally.
• Troubleshooting Guides: Replace the part with a new one.

• Code: 29
• Display: Replace [zzz] Soon * xxx indicates the part of the machine.
• Description: The life of the part expires soon.
• Troubleshooting Guides: Replace to each Maintenane item.

• Code: 30
• Display: Replace/Install Waste Toner Tank
• Description: The life span of the waste toner tank has expired and the printer will stop printing until a new waste toner tank is placed into the printer.
• Troubleshooting Guides: Replace to Imagine Unit.

• Code: 31
• Display: Scanner locked
• Description: The scanner module is locked
• Troubleshooting Guides:

• Code: 32
• Display: Transfer Belt Error
• Description: A problem has occurred in the transfer belt in the machine.
• Troubleshooting Guides: Unplug the power cord and plug it back in.

• Code: 33
• Display: Tray Paper Empty
• Description: There is no paper in the tray 1
• Troubleshooting Guides: Load paper in the tray 1.

– Get more information about Epson XP 15000 troubleshooting, click here

– Get more error code list with quick guide to fix printer product, click here

– About get help with reseting Epson inkpad or others, click here

Samsung printer reset software introduction:

Notes before resetting Samsung printer:

– Identify accurate version, serial and crum of Samsung printer.
– How to get Samsung printer model info: Click Here
– Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.
– It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.
– And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the “UPS” (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
– This firmware will be installed directly to your printer. Before opening firmare link make sure that printer is turned on and connected to your computer and printer drivers are installed correctly.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!

How To Run Firmware Fix Samsung printer

1. Connect the printer to the computer and turn it on.
2. Wait until the printer is ready for work.
3. Drag and drop *.hd to usbprns2.exe file.

4. The reprogramming process starts automatically.
5. Wait until the printer reprograms (10-20 minute) and restarts.
6. After that the reprogramming process is finished, restart the printer.

Contact us to get support with Samsung CLX2160 Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.