Samsung CLP610ND model and fix error codes list

Samsung CLP610ND model and fix error codes list

– Compatible Printer model: Samsung CLP610ND
– Samsung CLP610ND Error Codes with quick guides:

• Code: 01
• Display: [yyy] Cassette Out
• Description: The tray cassette is not properly closed.
• Troubleshooting Guides: To close the tray, lower the rear edge align it with the slot, and slide it into the printer.

• Code: 02
• Display: [yyy] Paper Empty
• Description: There is no paper in the tray.
• Troubleshooting Guides: Load paper in the tray.

• Code: 03
• Display: ADC Not Confirm Error
• Description: There is a problem in the ADC (Analog to Digital Converter) of your machine.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 04
• Display: ADC Slope Error Cycle Power.
• Description: The temperature slope for ADC (Analog to Digital Converter) shows the value out of the normal range.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 05
• Display: Adjusting… Registration
• Description: The machine is adjusting the color registration.
• Troubleshooting Guides: Please, wait a few minutes.

• Code: 06
• Display: CTD Calibration Error
• Description: The CTD (Color Toner Density) Calibration has invalid value.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 07
• Display: Deve Motor Locked
• Description: There is a problem with the deve motor which moves the toner supply device.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 08
• Display: Door Open
• Description: The front cover or the top cover is not securely latched.
• Troubleshooting Guides: Close the cover until it locks into place.

• Code: 09
• Display: Duplex Jam 0 Check Inside
• Description: Paper has jammed during duplex printing. It is applicable only for the machine with this feature.
• Troubleshooting Guides: Clear the jam.

• Code: 10
• Display: Duplex Jam 1 Open/Close Door
• Description: Paper has jammed during duplex printing. It is applicable only for the machine with this feature.
• Troubleshooting Guides: Clear the jam.

• Code: 11
• Display: Duplex Jam 2 Check Inside
• Description: Paper has jammed during duplex printing. It is applicable only for the machine with this feature.
• Troubleshooting Guides: Clear the jam.

• Code: 12
• Display: Fuser Fan Locked
• Description: There is a problem with the fan for the fuser unit.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

Solve Samsung CLP610ND Error codes

• Code: 13
• Display: Humidity Open Cycle Power
• Description: The humidity exceeds the normal range.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 14
• Display: Humidity Out Cycle Power
• Description: The humidity is fell under the normal range.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 15
• Display: Inner Temp. Open Cycle Power
• Description: The inner temperature of the machine is over the normal range.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 16
• Display: Inner Temp. Short Cycle Power
• Description: The inner temperature of the machine is under the normal range.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 17
• Display: Install Transfer Belt
• Description: The transfer belt is not installed.
• Troubleshooting Guides: Install a Samsung-genuine transfer belt.

• Code: 18
• Display: Install Toner
• Description: The color toner cartridge which the arrow indicates is not installed.
• Troubleshooting Guides: Install the corresponding toner cartridge with a Samsung-genuine cartridge

• Code: 19
• Display: Invalid Toner
• Description: The color toner cartridge which the arrow indecates is not suitable for your machine.
• Troubleshooting Guides: Install the corresponding toner cartridge with a Samsung-genuine cartridge.

• Code: 20
• Display: Invalid Transfer Belt
• Description: The transfer belt is not for your machine.
• Troubleshooting Guides: Install the Samsung-Invalid genuine transfer belt for your machineartridge

• Code: 21
• Display: IP Conflict
• Description: The network IP address you have set is being used by someone else.
• Troubleshooting Guides: Check the IP address and reset it if necessary.

• Code: 22
• Display: Load Manually Press Stop Key
• Description: The multi-purpose tray is empty in manual feed mode
• Troubleshooting Guides:

• Code: 23
• Display: Load [xxx] In [yyy]
• Description: There is no correspondingpaper in the corresponding tray.
• Troubleshooting Guides: Load corresponding paper in the corresponding tray.

• Code: 24
• Display: Low Heat Error Cycle Power
• Description: The fuser unit is low-heated.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 25
• Display: Low Power
• Description: The machine is in the previous stage of the power save mode.
• Troubleshooting Guides: When data is received, it switches to on-line automatically.

• Code: 26
• Display: LSU C-Hsync Err. Cycle Power
• Description: There is a problem in the laser beam detecting device of the LSU (Laser Scanning Unit).
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 27
• Display: LSU C-Motor Err. Cycle Power
• Description: There is a problem in the LSU (Laser Scanning Unit) motor.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 28
• Display: LSU Hsync Error Cycle Power
• Description: There is a problem in the laser beam detecting device of the LSU (Laser Scanning Unit).
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 29
• Display: LSU M-Hsync Err. Cycle Power
• Description: There is a problem in the laser beam detecting device of the LSU (Laser Scanning Unit).
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 30
• Display: LSU Motor Error Cycle Power
• Description: There is a problem in the LSU (Laser Scanning Unit) motor.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 31
• Display: LSU Y-Hsync Err. Cycle Power
• Description: There is a problem in the laser beam detecting device of the LSU (Laser Scanning Unit).
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 32
• Display: LSU Y-Motor Err. Cycle Power
• Description: There is a problem in the LSU (Laser Scanning Unit) motor.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 33
• Display: Main Motor Locked
• Description: There is a problem with the main motor for the machine
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 34
• Display: MP Tray Paper Jam 0
• Description: Paper has jammed in the multi-purpose tray.
• Troubleshooting Guides: Clear the jam.

• Code: 35
• Display: New Fuser Error
• Description: The problem has occurred in the newly installed fuser unit.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 36
• Display: Non Genuine Toner
• Description: The color toner cartridge which the arrow indecates may be recycled-toner.
• Troubleshooting Guides: Install the corresponding toner cartridge with a Samsung-genuine cartridge.

• Code: 37
• Display: Open Heat Error Cycle Power
• Description: The temperature for the fuser unit is over the normal range
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 38
• Display: Outer Temp.Open Cycle Power
• Description: The outer temperature of the machine is over the normal range.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 39
• Display: Outer Temp.Short Cycle Power
• Description: The outer temperature of the machine is under the normal range.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 40
• Display: Over Heat Error Cycle Power
• Description: The fuser unit is overheated.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 41
• Display: Paper Jam 1 Open/Close Door
• Description: Paper has jammed inside the machine.
• Troubleshooting Guides: Clear the jam.

• Code: 42
• Display: Paper Jam 2 Check Inside
• Description: Paper has jammed in the paper exit area.
• Troubleshooting Guides: Clear the jam.

• Code: 43
• Display: Remove Jam Open/Close Door
• Description: Paper has jammed in the fuser area.
• Troubleshooting Guides: Clear the jam.

• Code: 44
• Display: Replace Fuser
• Description: The life of the fuser unit is expired.
• Troubleshooting Guides: Replace the fuser unit with a new one. Please, contact the service representatives.

• Code: 45
• Display: Replace Fuser Soon
• Description: The life of the fuser unit will be expired soon.
• Troubleshooting Guides: Replace the fuser unit with a new one. Please, contact the service representatives.

• Code: 46
• Display: Replace Toner
• Description: This message appears between Toner Low and Toner Empty.
• Troubleshooting Guides: Replace the corresponding toner cartridge with a Samsung-genuine cartridge. The arrow indicates which color toner cartridge has to be replaced.

• Code: 47
• Display: Replace Transfer Belt
• Description: The life of the transfer belt is expired.
• Troubleshooting Guides: Replace the fuser unit with a new one. Please, contact the service representatives.

• Code: 48
• Display: Replace Transfer Belt Soon
• Description: The life of the transfer belt will be expired soon.
• Troubleshooting Guides: Replace the transfer belt with a new one. Please, contact the service representatives.

• Code: 49
• Display: Replace tray Pick-Roller
• Description: The life of the tray pick-roller expired.
• Troubleshooting Guides: Replace the fuser unit with a new one. Please, contact the service representatives.

• Code: 50
• Display: Self Diagnostics LSU
• Description: The LSU (Laser Scanning Unit) in your machine is checking some problems detected.
• Troubleshooting Guides: Please, wait a few minutes.

• Code: 51
• Display: Self Diagnostics Temperature
• Description: The engine in your machine is checking some problemd detected.
• Troubleshooting Guides: Please, wait a few minutes.

• Code: 52
• Display: Sleeping…
• Description: The machine is in the power save mode.
• Troubleshooting Guides: When data is received, it switches to on-line automatically.

• Code: 53
• Display: System Fan Locked
• Description: There is a problem with the main fan for the machine.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 54
• Display: Thermistor Open Cycle Power
• Description: There is a problem in the temperature sensing device for the fuser unit. This device detects value over the normal value range.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 55
• Display: Thermistor Short Cycle Power
• Description: There is a problem in the temperature sensing device for the fuser unit. This device detects value under the normal value range.
• Troubleshooting Guides: Unplug the power cord and plug it back in. If the problem persists, contact the service representatives.

• Code: 56
• Display: Toner Empty
• Description: The color toner cartridge which the arrow indicates has run out.
• Troubleshooting Guides: Replace the corresponding toner cartridge with a Samsung-genuine cartridge.

• Code: 57
• Display: Toner Low
• Description: The color toner cartridge which the arrow indicates is almost empty.
• Troubleshooting Guides: Take out the corresponding toner cartridge and thoroughly shake it. By doing this, you can temporarily reestablish printing operations.

• Code: 58
• Display: Tray 2 Paper Jam 0
• Description: Paper has jammed in the optional tray.
• Troubleshooting Guides: Clear the jam.

– Get more information about Epson XP 15000 troubleshooting, click here

– Get more error code list with quick guide to fix printer product, click here

– About get help with reseting Epson inkpad or others, click here

Samsung printer reset software introduction:

Notes before resetting Samsung printer:

– Identify accurate version, serial and crum of Samsung printer.
– How to get Samsung printer model info: Click Here
– Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.
– It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.
– And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the “UPS” (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
– This firmware will be installed directly to your printer. Before opening firmare link make sure that printer is turned on and connected to your computer and printer drivers are installed correctly.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!

How To Run Firmware Fix Samsung printer

1. Connect the printer to the computer and turn it on.
2. Wait until the printer is ready for work.
3. Drag and drop *.hd to usbprns2.exe file.

4. The reprogramming process starts automatically.
5. Wait until the printer reprograms (10-20 minute) and restarts.
6. After that the reprogramming process is finished, restart the printer.

Contact us to get support with Samsung CLP610ND Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.