Samsung CLP600N model and fix error codes list

Samsung CLP600N model and fix error codes list

– Compatible Printer model: Samsung CLP600N
– Samsung CLP600N Error Codes with quick guides:

• Code: 01
• Display: ACR Calibration
• Description: During auto color registration, a system error occurs so that the registration fails or does not run.
• Troubleshooting Guides: Turn the printer off, wait 30 secs and then turn it auto cleaning mode on.

• Code: 02
• Display: ADC Not Confirm Error
• Description: A problem has occurred in the ADC in the printer.
• Troubleshooting Guides: Replace the Main PBA if the same symptoms recur.

• Code: 03
• Display: Adjust Photo LED
• Description: During auto color registration, the printer does not recognize the photo LED in the paper transfer belt assembly.
• Troubleshooting Guides: Check the PTB Unit contact status or replace the PTB Unit.

• Code: 04
• Display: Cover Open
• Description: The top cover or access door is open.
• Troubleshooting Guides: Close the top cover or access door firmly.

• Code: 05
• Display: [Color] Toner Empty
• Description: The corresponding toner cartridge in your printer is empty and the printer does not operate.
• Troubleshooting Guides: Replace the corresponding toner cartridge with a new one.

• Code: 06
• Display: Engine Fuser Low Heat Error
• Description: The temperature in the fuser is abnormally low.
• Troubleshooting Guides: Unplug the power cord and plug it in again.

• Code: 07
• Display: Engine Fuser Over Heat Error
• Description: The temperature in the fuser is abnormally high.
• Troubleshooting Guides: Unplug the power cord and plug it in again.

• Code: 08
• Display: Engine LSU Error
• Description: A problem has occurred in the LSU (Laser Scanning Unit) in the printer.
• Troubleshooting Guides: Unplug the power cord and plug it in again.

• Code: 09
• Display: Install [Color] Toner
• Description: The indicated color toner cartridge is not installed in the printer.
• Troubleshooting Guides: Install the corresponding color toner cartridge.

• Code: 10
• Display: Install Transfer Belt
• Description: The paper transfer belt is not installed in the printer.
• Troubleshooting Guides: Install the paper transfer belt.

• Code: 11
• Display: Invalid Toner [Color]
• Description: An invalid toner cartridge has been installed.
• Troubleshooting Guides: Only install Samsung toner cartridges, designed for your printer. Or install the toner cartridge into each proper cartridge slot.

• Code: 12
• Display: Invalid Transfer Belt
• Description: An invalid paper transfer belt has been installed.
• Troubleshooting Guides: Only install Samsung paper transfer belts, designed for your printer.

Solve Samsung CLP600N Error codes

• Code: 13
• Display: Jam0 In Tray1 Jam0 In Tray2 Jam0 In MP Tray
• Description: A paper jam has occurred in or near the indicated tray.
• Troubleshooting Guides: Remove the jammed paper from the corresponding tray.

• Code: 14
• Display: Jam In Exit Area
• Description: A paper jam has occurred in the paper exit area.
• Troubleshooting Guides: Remove the jammed paper from the printer.

• Code: 15
• Display: Jam Inside Printer
• Description: A paper jam has occurred inside the printer.
• Troubleshooting Guides: Open the access door and remove the jammed paper from the printer.

• Code: 16
• Display: Load [Size] In Tray1 Load [Size] In Tray2 Load [Size] In MP
• Description: The paper size specified in the printer properties does not match the paper you are loading.
• Troubleshooting Guides: Load the correct paper in the tray.

• Code: 17
• Display: Low Density
• Description: The amount of the toner which is spread on the paper transfer belt for adjusting auto color registration is very small, so that the printer does not recognize the toner during auto color registration.
• Troubleshooting Guides: Replace the toner cartridge(s) with a new one.

• Code: 18
• Display: Main Motor Error
• Description: A problem has occurred in the development motor of the printer.
• Troubleshooting Guides: Unplug the power cord and plug it in again.

• Code: 19
• Display: Memory Overflow
• Description: The printer does not have enough memory to print the current job. An error has occurred in the firmware program of the printer.
• Troubleshooting Guides: The job automatically clears and the printer returns to Standby Mode. Lower the print resolution and try again.

• Code: 20
• Display: Paper Empty [Size] In Tray1 Paper Empty [Size] In Tray2 Paper Empty [Size] In Mp Paper Empty [Size] In Manual
• Description: The paper tray has run out of paper.
• Troubleshooting Guides: Load paper in the paper tray.

• Code: 21
• Display: Press Continue Button
• Description: The printer is waiting for the user’s action before printing from the Multi-purpose Tray using the manual feed mode.
• Troubleshooting Guides: Load a sheet of print material and press the On Line/Continue button. You need to press the button for each page.

• Code: 22
• Display: Ready [Color] Low Toner
• Description: The corresponding toner cartridge in your printer is low on toner.
• Troubleshooting Guides: Redistribute the toner in the corresponding toner cartridge.

• Code: 23
• Display: Ready IP Conflict
• Description: The IP address of the printer conflicts with other devices on the network.
• Troubleshooting Guides: Contact your network administrator and choose an address within your subnet which will not conflict with any other devices.

• Code: 24
• Display: Replace [Color] Toner
• Description: The corresponding toner cartridge in your printer is nearly empty. However, the printer continues printing, even though print quality is not optimal.
• Troubleshooting Guides: If necessary, replace the corresponding toner cartridge with a new one.

• Code: 25
• Display: Replace Fuser
• Description: The life span of the fuser unit has expired.
• Troubleshooting Guides: Replace the fuser unit with a new one.

• Code: 26
• Display: Replace Fuser Soon
• Description: The life span of the fuser unit will expire soon.
• Troubleshooting Guides: When “Replace Fuser” appears on the display, replace the fuser unit.

• Code: 27
• Display: Replace MP Pick-roller
• Description: The life span of the MP pickup roller has expired.
• Troubleshooting Guides: Check the MP pickup roller life period or replace pickup roller.

• Code: 28
• Display: Replace Transfer Belt
• Description: The life span of the paper transfer belt has expired.
• Troubleshooting Guides: Replace the paper transfer belt with a new one.

• Code: 29
• Display: Replace Transfer Belt Soon
• Description: The life span of the paper transfer belt will expire soon.
• Troubleshooting Guides: When “Replace Transfer Belt” appears on the display, replace the paper transfer belt.

• Code: 30
• Display: Replace Tray1 Pick-roller
• Description: The life span of the Tray1 pickup roller has expired.
• Troubleshooting Guides: Check the Tray1 pickup roller life period or replace Tray1 pickup roller.

• Code: 31
• Display: Replace Tray2 Pick-roller
• Description: The life span of the Tray2 pickup roller has expired.
• Troubleshooting Guides: Check the Tray2 pickup roller life period or replace Tray2 pickup roller.

• Code: 32
• Display: Tray2 Error
• Description: The optional Tray2 is not properly installed or connected to the printer.
• Troubleshooting Guides: After turn the printer off and then back on, reinstall the optional Tray2.

• Code: 33
• Display: Tray2 Jam Cover Open
• Description: The optional Tray2 jam cover is open.
• Troubleshooting Guides: Close the Tray2 cover firmly.

– Get more information about Epson XP 15000 troubleshooting, click here

– Get more error code list with quick guide to fix printer product, click here

– About get help with reseting Epson inkpad or others, click here

Samsung printer reset software introduction:

Notes before resetting Samsung printer:

– Identify accurate version, serial and crum of Samsung printer.
– How to get Samsung printer model info: Click Here
– Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.
– It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.
– And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the “UPS” (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
– This firmware will be installed directly to your printer. Before opening firmare link make sure that printer is turned on and connected to your computer and printer drivers are installed correctly.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!

How To Run Firmware Fix Samsung printer

1. Connect the printer to the computer and turn it on.
2. Wait until the printer is ready for work.
3. Drag and drop *.hd to usbprns2.exe file.

4. The reprogramming process starts automatically.
5. Wait until the printer reprograms (10-20 minute) and restarts.
6. After that the reprogramming process is finished, restart the printer.

Contact us to get support with Samsung CLP600N Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.