Repair Canon NP6650 Printer Error Codes Canon Servie Tool
– Printer model: Canon NP6650
– Error codes on Canon NP6650 model and its description:
– Canon NP6650 printer Error Codes and quick guide to troubleshooting:
- Code: E000
- Description: Thermistor
- Code: E001
- Description: SSR
- Code: E002
- Description: Thermistor, ht. Lamp thermal fuse or SSR
- Code: E003
- Description: Thermistor, ht. Lamp thermal fuse or SSR
- Code: E005
- Description: Fuser cleaning belt
- Code: E010
- Description: Main drive problem
- Code: E020
- Description: Toner motor, toner level sensor, toner hopper sensor
- Code: E030
- Description: Counter
- Code: E050
- Description: Duplex problem
- Code: E203
- Description: Scan home problem
- Code: E210
- Description: Lens home sensor
- Code: E401
- Description: Document feeder paper pickup motor
- Code: E402
- Description: Document feeder belt clock pulse problem
- Code: E403
- Description: Document feeder main motor clock pulse problem
- Code: E411
- Description: Document feeder sensor problem
- Code: E500
- Description: Sorter/copier interface problem
- Code: E500
- Description: An error is identified in the communication between the sorter and the copier
- Code: E510
- Description: The clock signal from the motor is absent for 250ms or more
- Code: E510
- Description: Sorter motor drive
- Code: E513
- Description: The clock signal from the motor is absent for 250 ms or more
- Code: E530
- Description: Sorter home sensor
- Code: E530
- Description: The home position sensor (P17) fails to go OFF when an equivalent of 2560 pulses of the motor drive command has been generated
- Code: E531
- Description: The stapler unit swing sensor (MS9) fails to go ON within 500 ms after the motor drive command has been generated. MS9 fails to go back OFF within 1000 ms after it has gone on
- Code: E531
- Description: Stapler swing sensor
- Code: E540
- Description: The lead cam home position sensor (P12) fails to go OFF within 2000 ms after the motor drive command has been generated. P12 fails to go back ON within 2000 ms after it has gone OFF
- Code: E540
- Description: Sorter lead cam home sensor
- Code: E541
- Description: Sorter lead cam home sensor
- Code: E710
- Description: DC controller board
- Code: E711
- Description: DC controller board
- Code: E712
- Description: Document feeder problem
About Canon Servie Tool V5610
– Canon Service Tool V5610 is a tool used to perform maintenance on Canon printers and reset Canon printers after replacement of parts such as replacing ink absorbents, print heads, printer mainboard, and others. Based on the many cases we have encountered, the Service Tool is most often used to reset ink absorber counter value when the waste ink absorber is full.
– The ink absorber is going to be full of box, it has to be replaced or cleaned the waste ink absorber. Also, replaceing or cleaning the waste ink absorber, you need to repair or reset the waste ink counter value, cause those parts are concerned to each others.
– So using Canon Service Tool V5610 to reset the waste ink counter value becomes effective when the ink absorber is replaced or cleaned.
– Canon Service Tool V5610 can use to fix error code 5B00, 5B02, 5B04, 5B14, 1701, 1702, 1700 on your printer. You must enter Service Mode on your printer to use this Canon Service Tool.
– If the printer can not enter Service Mode, you can not reset it by Canon ST V5610. In this case, change EEPROM on the logic board.
Canon Service Tool V5610 Functions
– Fix Canon printer 7 times/ 8 times red light blinking:
– Fix Canon printer error code: 5B00, 5B01, 1700, 1701
Enter Service Mode on Canon Printer
1. Turn off a printer.
2. Press and hold the Resume/Cancel/Stop button.
3. Press and hold the ON button (do not release both buttons).
4. Release the Resume/Cancel/Stop button (do not release the ON button).
5. While holding the ON button, press the Resume/Cancel/Stop button 5 times, then release both the ON and Resume/Cancel/Stop buttons together.
– Canon printer in service mode: computer detects new hardware, led on printer goes green light.
– Download Canon driver and firmware in specific model: https://dnasofts.com/canon-ip1500-printer-driver-firmware-and-user-manual-free-download/
– Download Epson driver and firmware in specific model: https://dnasofts.com/download-epson-wf-m5799-driver-firmware-and-manuals/
Source:
https://chiplessprinter.com/canon-service-tool-v5610.html
https://dnasofts.com
https://shop.nguyendangnam.com/
https://nguyendangnam.me/
https://chiplessprinter.com/reset-epson-waste-ink-pad-counter.html
Contact us to get support with Canon NP6650 Error case
Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
