Repair Canon MF6780dw Printer Error Codes Canon Servie Tool

Repair Canon MF6780dw Printer Error Codes Canon Servie Tool

– Printer model: Canon MF6780dw
– Error codes on Canon MF6780dw model and its description:

– Canon MF6780dw printer Error Codes and quick guide to troubleshooting:

• Code: 0001
• Description: Document End Sensor Delay
• Solutions:

• Code: 0002
• Description: Document End Sensor PS702
• Solutions:

• Code: 0004
• Description: Document Sensor Delay
• Solutions:

• Code: 0005
• Description: Document Sensor PS703
• Solutions:

• Code: 0040
• Description: Size error
• Solutions:

• Code: 0060
• Description: Size error
• Solutions:

• Code: 0071
• Description: Sequence Error
• Solutions:

• Code: 0094
• Description: Document Sensor/Document End Sensor PS702/703
• Solutions:

• Code: 0104
• Description: Top Sensor Delay
• Solutions:

• Code: 010C
• Description: Fixing Delivery Sensor Delay PS204/205
• Solutions:

• Code: 014C
• Description: Media Full Sensor Delay PS204
• Solutions:

• Code: 0184
• Description: Duplex Feed Sensor Delay
• Solutions:

• Code: 0208
• Description: Top Sensor PS204
• Solutions:

• Code: 0210
• Description: Fixing Delivery Sensor PS915
• Solutions:

• Code: 021C
• Description: Wrap
• Solutions:

• Code: 0248
• Description: Top Sensor/Media full sensor/Fixing Delivery Sensor PS204/205/915
• Solutions:

• Code: 0250
• Description: Top Sensor/Media full sensor/Fixing Delivery Sensor PS204/205/915
• Solutions:

• Code: 025C
• Description: Top Sensor/Media Full Sensor PS204/205
• Solutions:

• Code: 0260
• Description: Duplex Feed Sensor Delay
• Solutions:

• Code: 0261
• Description: Duplex Feed Sensor P201
• Solutions:

• Code: 02A0
• Description: Duplex Feed Sensor Delay
• Solutions:

• Code: 02A1
• Description: Duplex Feed Sensor P201
• Solutions:

• Code: 02E0
• Description: Duplex Feed Sensor Delay
• Solutions:

• Code: 02E1
• Description: Duplex Feed Sensor P201
• Solutions:

• Code: 1014
• Description: Top Sensor/Media Full Sensor PS204/205
• Solutions:

• Code: 1054
• Description: Top Sensor/Media full sensor/Fixing Delivery Sensor PS204/205/915
• Solutions:

• Code: 1094
• Description: Top Sensor/Media full sensor/Fixing Delivery Sensor PS204/205/915
• Solutions:

• Code: 10D4
• Description: Duplex Feed Sensor PS201
• Solutions:

• Code: 1118
• Description: Duaring a Pickup
• Solutions:

• Code: 1158
• Description: Top Sensor/Media full sensor/Fixing Delivery Sensor PS204/205/915
• Solutions:

• Code: 1198
• Description: Top Sensor/Media full sensor/Fixing Delivery Sensor PS204/205/915
• Solutions:

• Code: 11D8
• Description: Duplex Feed Sensor PS201
• Solutions:

• Code: E000-0000
• Description: Error in temperature rising of Fixing Assembly
  Temperature of the Fixing Assembly did not reach a certain temperature within the specified period of time.
• Solutions: 1. Check the connector between the Fixing Assembly and the DC Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

• Code: E001-0000
• Description: Abnormal high temperature of Fixing Assembly
  It was detected that the temperature of the Fixing Assembly was abnormally high.
• Solutions: 1. Check the connector between the Fixing Assembly and the DC Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

• Code: E003-0000
• Description: Abnormal low temperature of Fixing Assembly
  It was detected that the temperature of the Fixing Assembly was abnormally low.
• Solutions: 1. Check the connector between the Fixing Assembly and the DC Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the DC Controller PCB.

• Code: E004-0000
• Description: Error in fixing power supply drive circuit
  Failed to detect the zero cross signal for the specified period of time or more.
• Solutions: 1. Check the connection of connector between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

• Code: E014-0000
• Description: Error in startup of the Main Motor
  Revolution of the Main Motor did not reach the specified value.
• Solutions: 1. Check the connection of connector between the Main Motor and the Engine Controller PCB. 2. Replace the Main Motor. 3. Replace the Engine Controller PCB.

• Code: E100-0000
• Description: Laser Scanner Assembly error
  At the Laser Scanner Unit, BD cycle was not within the specified range.
• Solutions: 1. Check the connection of connector between the Main Controller PCB and the Laser Scanner Unit. 2. Check the connection of connector between the Relay PCB and the Laser Scanner Unit. 3. Replace the Laser Scanner Unit

• Code: E196-1000
• Description: Main Controller PCB reading/writing error
  Error in reading/writing of main program in the Main Controller PCB
• Solutions: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.

• Code: E196-2000
• Description: Main Controller PCB reading/writing error
  Error in reading/writing of setting values storage area in the Main Controller PCB
• Solutions: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.

• Code: E202-0001
• Description: CIS Unit HP error (outward)
  CIS Unit did not move to HP even it moved backward.Reader
  HP Sensor error, Reader Motor error, CIS Unit error
• Solutions: 1. Replace the Reader HP Sensor. 2. Replace the Reader Motor. 3. Replace the CIS Unit. 4. Replace the Reader Unit.

• Code: E202-0002
• Description: CIS Unit HP error (homeward)
  CIS Unit did not move to HP even it moved forward.
  Reader HP Sensor error, Reader Motor error, CIS Unit error
• Solutions: 1. Replace the Reader HP Sensor. 2. Replace the Reader Motor. 3. Replace the CIS Unit. 4. Replace the Reader Unit.

• Code: E248-0001
• Description: Error in access to backup data for Reader (reading error at power-on)
  The Reader-related adjustment values could not be read.
• Solutions: 1. Clear the backup RAM of RCON. Execute COPIER>FUNCTION>CLEAR>RCON. 2. Enter all the values written on the service label in service mode again. 3. Turn OFF and then ON the main power.

• Code: E351-0000
• Description: System error
• Solutions: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.

• Code: E733-0000
• Description: Printer communication error
  Communication error between the Engine Controller PCB and the Main Controller PCB occurred.
• Solutions: 1. Check the connection of connector between the Engine Controller PCB and the Main Controller PCB. 2. Install the set of the controller firmware. 3. Replace the Main Controller PCB. 4. Replace the Engine Controller PCB.

• Code: E736-0000
• Description: Communication error with CCU/modem
  NCU PCB type error.
• Solutions: 1. Install the set of the controller firmware. 2. Replace the NCU PCB. 3. Replace the Main Controller PCB.

• Code: E744-0001
• Description: Language file version error
  Language file version was not matched with the main program.
• Solutions: Install the set of the controller firmware.

• Code: E744-0002
• Description: Language file size error
  The size of the language file exceeded the upper limit.
• Solutions: Install the set of the controller firmware.

• Code: E744-1001
• Description: Firmware version error
  Version of the main program and the version of the start-up program was not matched.
• Solutions: Install the set of the controller firmware.

• Code: E744-4000
• Description: Engine ID error
  Invalid engine connection was detected.
• Solutions: 1. Turn OFF and then ON the main power. 2. Check the Engine Controller PCB. 3. Install the Engine Controller PCB. 4. Install the set of the controller firmware. 5. Check the model code. (When the model code and the engine code are mismatched, E744-4000 occurs.)

• Code: E744-5000
• Description: Error in the Control Panel PCB
  Error in the Control Panel PCB (microcomputer).
• Solutions: 1. Check the Control Panel PCB, and install the firmware (PANEL). 2. Install the set of the controller firmware. 3. Replace the Main Controller PCB.

• Code: E744-6000
• Description: Communication error with the Wireless LAN PCB
  Unable to communicate with the Wireless LAN.
• Solutions: 1. Turn OFF and then ON the main power. 2. Check the connection of the Wireless LAN. 3. Install the set of the controller firmware. 4. Replace the Main Controller PCB.

• Code: E744-7000
• Description: Main Controller PCB error
  An error in the microcomputer which retains fax job information of the Main Controller PCB.
• Solutions: 1. Install the firmware of BKUP. 2. Install the set of the controller firmware. 3. Replace the Main Controller PCB.

• Code: E746-0000
• Description: Main Controller PCB error
  Main Controller communication error occurred (other than scan).
• Solutions: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.

• Code: E766-8000
• Description: Digital registration error
  Information at digital registration could not be obtained.
• Solutions: 1. Install the Engine Controller firmware. 2. Install the set of the controller firmware. 3. Replace the Engine Controller PCB.

• Code: E766-9000
• Description: Scanner power state error
  An error was detected in power state of the Laser Scanner Unit.
• Solutions:

• Code: E766-xxxx
• Description: Firmware error
  An error due to the controller software occurred so that print could not be proceeded.
• Solutions: Due to firmware error, the possibility of solving the error by replacing the Main Controller PCB is low. Check the installed engine again.

• Code: E804-0004
• Description: Controller Fan error
  Since the startup of the Controller Fan, the Fan was locked for a specified consecutive period of time.
• Solutions: 1. Check power supply to the Controller Fan. 2. Replace the Controller Fan.

• Code: E805-0000
• Description: Main Fan error
  The Main Fan was locked for a specified consecutive period of time.
• Solutions: 1. Check the connection of the Main Fan. 2. Replace the Main Fan.

• Code: E808-0000
• Description: Failure detection of Low Voltage Power Supply PCB
  Printer detected failure of the Low Voltage Power Supply PCB.
• Solutions: Replace the Engine Controller PCB.

About Canon Servie Tool V5610

– Canon Service Tool V5610 is a tool used to perform maintenance on Canon printers and reset Canon printers after replacement of parts such as replacing ink absorbents, print heads, printer mainboard, and others. Based on the many cases we have encountered, the Service Tool is most often used to reset ink absorber counter value when the waste ink absorber is full.
– The ink absorber is going to be full of box, it has to be replaced or cleaned the waste ink absorber. Also, replaceing or cleaning the waste ink absorber, you need to repair or reset the waste ink counter value, cause those parts are concerned to each others.
– So using Canon Service Tool V5610 to reset the waste ink counter value becomes effective when the ink absorber is replaced or cleaned.

– Canon Service Tool V5610 can use to fix error code 5B00, 5B02, 5B04, 5B14, 1701, 1702, 1700 on your printer. You must enter Service Mode on your printer to use this Canon Service Tool.
– If the printer can not enter Service Mode, you can not reset it by Canon ST V5610. In this case, change EEPROM on the logic board.

Canon Service Tool V5610 Functions

– Fix Canon printer 7 times/ 8 times red light blinking:

– Fix Canon printer error code: 5B00, 5B01, 1700, 1701

Enter Service Mode on Canon Printer

1. Turn off a printer.
2. Press and hold the Resume/Cancel/Stop button.
3. Press and hold the ON button (do not release both buttons).
4. Release the Resume/Cancel/Stop button (do not release the ON button).
5. While holding the ON button, press the Resume/Cancel/Stop button 5 times, then release both the ON and Resume/Cancel/Stop buttons together.
– Canon printer in service mode: computer detects new hardware, led on printer goes green light.

– Download Canon driver and firmware in specific model: https://dnasofts.com/canon-mg6620-printer-driver-firmware-and-user-manual-free-download/
– Download Epson driver and firmware in specific model: https://dnasofts.com/download-epson-fx-1180-driver-firmware-and-manuals/

Source:
https://chiplessprinter.com/canon-service-tool-v5610.html
https://dnasofts.com
https://shop.nguyendangnam.com/
https://nguyendangnam.me/
https://chiplessprinter.com/reset-epson-waste-ink-pad-counter.html

Contact us to get support with Canon MF6780dw Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/