Repair Canon MF5840dn Printer Error Codes Canon Servie Tool

Repair Canon MF5840dn Printer Error Codes Canon Servie Tool

– Printer model: Canon MF5840dn
– Error codes on Canon MF5840dn model and its description:

– Canon MF5840dn printer Error Codes and quick guide to troubleshooting:

• Code: #705
• Description: Exceeded max. image size per document
  – Exceeded max number of image pages (100 pages) in PDF transmission
• Solutions:

• Code: #751
• Description: Failed to connect to server (Socket level)
  – Disconnected the network (Socket is closed.)
• Solutions:

• Code: #752
• Description: Failed to connect to server (Socket level)
  – Disconnected the network (Socket is closed.)
• Solutions:

• Code: #753
• Description: Occurred socket errors other than E751/E752
• Solutions:

• Code: #755
• Description: It started beginning to transmit before the network was connected.
• Solutions:

• Code: #801
• Description: Returned error from SMTP server
  – SMTP protocol time out
  – Exceeded the specified connecting time limit.
• Solutions:

• Code: #802
• Description: Failed in name resolution using DNS server
• Solutions:

• Code: #804
• Description: Returned error from FTP server
  (No access right to the folder)
• Solutions:

• Code: #806
• Description: Returned error from FTP server
  (User name/Password)
• Solutions:

• Code: #808
• Description: Returned error from FTP server
  (Other than E804/E806)
  – FTP protocol time out
  – Exceeded the specified connecting time limit.
• Solutions:

• Code: #810
• Description: Returned error from POP3 server
  – POP3 protocol time out
  – Exceeded the specified connecting time limit.
• Solutions:

• Code: #812
• Description: POP3 password error
• Solutions:

• Code: #813
• Description: POP3 login name error
• Solutions:

• Code: #819
• Description: MIME data error
• Solutions:

• Code: #820
• Description: Base64/uuencode error
• Solutions:

• Code: #821
• Description: TIFF analysis error
• Solutions:

• Code: #827
• Description: non support MIME receive
• Solutions:

• Code: #828
• Description: Type of HTML mail receive error
• Solutions:

• Code: #829
• Description: Exceeded max receivable size
• Solutions:

• Code: #839
• Description: SMTP AUTH authentication error
  (email and iFAX transmitt)
• Solutions:

• Code: E000-0
• Description: Startup error
  – The temperature detected by the main or sub thermistor does not rise to the specified value during startup control.
• Solutions: – Check the fixing film connector. – Replace the fixing film unit. – Replace the Engine controller PCB.

• Code: E001-0
• Description: Abnormally high temperature (detected by main thermistor)
  – The main thermistor detected an abnormally high temperature during temperature control.
• Solutions: – Check the connector of the fixing film unit. – Replace the fixing film unit. – Replace the Engine controller PCB.

• Code: E001-1
• Description: Abnormally high temperature (detected by sub thermistor)
  – The sub thermistor detected an abnormally high temperature during temperature control.
• Solutions: – Check the connector of the fixing film unit. – Replace the fixing film unit. – Replace the Engine controller PCB.

• Code: E002-0
• Description: Low temperature during temperature control.
  – The target temperature is not reached during temperature control.
• Solutions: – Check the connector of the fixing film unit. – Replace the fixing film unit. – Replace the Engine controller PCB.

• Code: E003-0
• Description: Abnormally low temperature (detected by main thermistor)
  -After the temperature detected by the main thermistor has reached the specified value, it does not reach the specified value during initial rotation.
• Solutions: – Check the connector of the fixing film unit. – Replace the fixing film unit. – Replace the Engine controller PCB.

• Code: E003-1
• Description: Abnormally low temperature (detected by sub thermistor)
  – After the temperature detected by the sub thermistor has reached the specified value, it does not reach the specified value during initial rotation.
• Solutions: – Check the connector of the fixing film unit. – Replace the fixing film unit. – Replace the Engine controller PCB

• Code: E010-0
• Description: Main motor failure
  – The main motor is faulty.
• Solutions: – Check the connector of the main motor. – Replace the main motor. – Replace the Engine controller PCB.

• Code: E100-0
• Description: BD detection PCB failure
  – The BD detection PCB is faulty.
• Solutions: – Replace the laser scanner unit. – Replace the Engine controller PCB.

• Code: E196-1
• Description: Flash ROM write/read error
  – The write/read of Flash ROM in the Main Controller Board is faulty.
• Solutions: – Replace the Main Controller Board.

• Code: E196-2
• Description: PCL ROM write/read error
  – The write/read of PCL ROM in the Main Controller Board is faulty.
• Solutions: – Replace the Main Controller Board.

• Code: E197-0
• Description: Printer engine communication error
  – Erroneous communication between the Engine controller PCB and Main Controller Board was detected.
• Solutions: – Check the connectors of the Engine controller PCB and Main Controller Board. – Replace the Engine controller PCB for normal connection. – Replace the Main Controller Board.

• Code: E716-0
• Description: Erroneous communication with optional cassette
  – Disconnection of the optional cassette was detected after power-on, detection of normal connection to the optional cassette, and start of communication.
• Solutions: – Check the connectors of the optional cassette PCB and Engine controller PCB. – Replace the optional cassette PCB for normal connection. – Replace the Engine controller PCB

• Code: E730-0
• Description: Inside error of the Main Controller Board (PDL system error)
  – The inside of the Main Controller Board is faulty.
• Solutions: – Replace the Main Controller Board.

• Code: E733-0
• Description: Erroneous communication between controller and printer
  Cannot communicate with the printer at startup.
• Solutions: – Check the connectors of the Engine controller PCB and Main Controller Board for normal connection. – Check the power supply of the printer (Check whether initialization is performed at startup). – Replace the Engine controller PCB or Main Controller Board.

• Code: E736-0
• Description: CCU communication error
  – The installed modem PCB is incompatible.
• Solutions: – Check the connectors of the Main Controller Board and modem. – Replace the modem PCB. – Replace the Main Controller Board.

• Code: E739-0
• Description: Erroneous communication between controller and network board
  – The installed network board is incompatible
• Solutions: – Replace the Main Controller Board.

• Code: E805-0
• Description: Fan failure
  – The fan is faulty.
• Solutions: – Check the fan connector. – Replace the fan. – Replace the Engine controller PCB.

• Code: E808-0
• Description: Fixing drive circuit failure
  – The heater does not turn on.
  – A fixing drive motor failure was detected
• Solutions: – Check the connector of the fixing film unit. – Replace the fixing film unit. – Replace the fixing drive motor. – Replace the Engine controller PCB. – Replace the power supply PCB.

About Canon Servie Tool V5610

– Canon Service Tool V5610 is a tool used to perform maintenance on Canon printers and reset Canon printers after replacement of parts such as replacing ink absorbents, print heads, printer mainboard, and others. Based on the many cases we have encountered, the Service Tool is most often used to reset ink absorber counter value when the waste ink absorber is full.
– The ink absorber is going to be full of box, it has to be replaced or cleaned the waste ink absorber. Also, replaceing or cleaning the waste ink absorber, you need to repair or reset the waste ink counter value, cause those parts are concerned to each others.
– So using Canon Service Tool V5610 to reset the waste ink counter value becomes effective when the ink absorber is replaced or cleaned.

– Canon Service Tool V5610 can use to fix error code 5B00, 5B02, 5B04, 5B14, 1701, 1702, 1700 on your printer. You must enter Service Mode on your printer to use this Canon Service Tool.
– If the printer can not enter Service Mode, you can not reset it by Canon ST V5610. In this case, change EEPROM on the logic board.

Canon Service Tool V5610 Functions

– Fix Canon printer 7 times/ 8 times red light blinking:

– Fix Canon printer error code: 5B00, 5B01, 1700, 1701

Enter Service Mode on Canon Printer

1. Turn off a printer.
2. Press and hold the Resume/Cancel/Stop button.
3. Press and hold the ON button (do not release both buttons).
4. Release the Resume/Cancel/Stop button (do not release the ON button).
5. While holding the ON button, press the Resume/Cancel/Stop button 5 times, then release both the ON and Resume/Cancel/Stop buttons together.
– Canon printer in service mode: computer detects new hardware, led on printer goes green light.

– Download Canon driver and firmware in specific model: https://dnasofts.com/canon-mp980-printer-driver-firmware-and-user-manual-free-download/
– Download Epson driver and firmware in specific model: https://dnasofts.com/download-epson-wf-7510-driver-firmware-and-manuals/

Source:
https://chiplessprinter.com/canon-service-tool-v5610.html
https://dnasofts.com
https://shop.nguyendangnam.com/
https://nguyendangnam.me/
https://chiplessprinter.com/reset-epson-waste-ink-pad-counter.html

Contact us to get support with Canon MF5840dn Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/