Repair Canon LBP351x Printer Error Codes Canon Servie Tool

– Printer model: Canon LBP351x
– Error codes on Canon LBP351x model and its description:

– Canon LBP351x printer Error Codes and quick guide to troubleshooting:

Code: A4-nn
Description: System error
Causes: System error
Solutions: – Turn OFF and then ON the main power. If the error persists, obtain the following information and contact the department in charge of quality management. – Output STATUS PRINT/P-PRINT. – Collect Sublog – Collect information on conditions to reproduce the error – Obtain user’s print data (binary data)

Code: A5-nn
Description: System error
Causes: System error
Solutions: – Turn OFF and then ON the main power. If the error persists, obtain the following information and contact the department in charge of quality management. – Output STATUS PRINT/P-PRINT. – Collect Sublog – Collect information on conditions to reproduce the error – Obtain user’s print data (binary data)

Code: A7-nn
Description: System error
Causes: System error
Solutions: – Turn OFF and then ON the main power. If the error persists, obtain the following information and contact the department in charge of quality management. – Output STATUS PRINT/P-PRINT. – Collect Sublog – Collect information on conditions to reproduce the error – Obtain user’s print data (binary data)

Code: D0-nn
Description: System error
Causes: System error
Solutions: – Turn OFF and then ON the main power. If the error persists, obtain the following information and contact the department in charge of quality management. – Output STATUS PRINT/P-PRINT. – Collect Sublog – Collect information on conditions to reproduce the error – Obtain user’s print data (binary data)

Code: D7-nn
Description: System error
Causes: System error
Solutions: – Turn OFF and then ON the main power. If the error persists, obtain the following information and contact the department in charge of quality management. – Output STATUS PRINT/P-PRINT. – Collect Sublog – Collect information on conditions to reproduce the error – Obtain user’s print data (binary data)

Code: D8-nn
Description: System error
Causes: System error
Solutions: – Turn OFF and then ON the main power. If the error persists, obtain the following information and contact the department in charge of quality management. – Output STATUS PRINT/P-PRINT. – Collect Sublog – Collect information on conditions to reproduce the error – Obtain user’s print data (binary data)

Code: D9-nn
Description: System error
Causes: System error
Solutions: – Turn OFF and then ON the main power. If the error persists, obtain the following information and contact the department in charge of quality management. – Output STATUS PRINT/P-PRINT. – Collect Sublog – Collect information on conditions to reproduce the error – Obtain user’s print data (binary data)

Code: E000-0000
Description: Fixing temperature rising error
Causes: Temperature of the Main Thermistor did not become the specified temperature although the specified time had passed.
Solutions: 1. Check the drawer connector between the Fixing Assembly and the Power Supply PCB. 2. Replace the Fixing Assembly. 3. Replace the Power Supply PCB.

Code: E001-0000
Description: Abnormally high fixing temperature 1
Causes: The Main Thermistor detected a temperature higher than the specified temperature.
Solutions: 1. Check the drawer connector between the Fixing Assembly and the Power Supply PCB. 2. Replace the Fixing Assembly. 3. Replace the Power Supply PCB.

Code: E001-0001
Description: Abnormally high fixing temperature 2
Causes: The Sub Thermistor detected a temperature higher than the specified temperature.
Solutions: 1. Check the drawer connector between the Fixing Assembly and the Power Supply PCB. 2. Replace the Fixing Assembly. 3. Replace the Power Supply PCB.

Code: E003-0000
Description: Abnormally low fixing temperature detection 1
Causes: Temperature of the Main Thermistor was lower than the specified temperature when the heater was ON.
Solutions: 1. Check the drawer connector between the Fixing Assembly and the Power Supply PCB. 2. Replace the Fixing Assembly. 3. Replace the Power Supply PCB.

Code: E003-0001
Description: Abnormally low fixing temperature detection 2
Causes: Temperature of the Sub Thermistor 1 was lower than the specified temperature when the heater was ON.
Solutions: 1. Check the drawer connector between the Fixing Assembly and the Power Supply PCB. 2. Replace the Fixing Assembly. 3. Replace the Power Supply PCB.

Code: E004-0000
Description: Fixing Drive Assembly circuit error
Causes: Error in either the Fixing Heater or the Fixing Motor
Solutions: 1. Check the drawer connector between the Fixing Assembly and the Power Supply PCB. 2. Check the connection of the Fixing Motor. 3. Replace the Fixing Assembly. 4. Replace the Fixing Motor. 5. Replace the Power Supply PCB.

Code: E004-0004
Description: Mismatch of Fixing Assembly type
Causes: A fixing assembly of another product was installed.
Solutions: Replace the fixing assembly with that of this product.

Code: E012-0000
Description: Pickup Motor error
Causes: Pickup Motor error (startup error)
Solutions: 1. Check the connector between the Pickup Motor and the DC Controller PCB. 2. Replace the Pickup Motor. 3. Replace the DC Controller PCB. 4. Replace the Pickup Drive Unit.

Code: E012-0001
Description: Pickup Motor error
Causes: Pickup Motor error (rotation error)
Solutions: 1. Check the connector between the Pickup Motor and the DC Controller PCB. 2. Replace the Pickup Motor. 3. Replace the DC Controller PCB. 4. Replace the Pickup Drive Unit.

Code: E012-0008
Description: Main Motor error
Causes: Main Motor error (startup error)
Solutions: 1. Check the connector between the Main Motor and the DC Controller PCB. 2. Replace the Main Motor. 3. Replace the DC Controller PCB. 4. Replace the Main Drive Unit.

Code: E012-0009
Description: Main Motor error
Causes: Main Motor error (rotation error)
Solutions: 1. Check the connector between the Main Motor and the DC Controller PCB. 2. Replace the Main Motor. 3. Replace the DC Controller PCB. 4. Replace the Main Drive Unit.

Code: E014-0000
Description: Fixing Motor error
Causes: Error in startup of the Fixing Motor
Solutions: 1. Check the connection of the Fixing Motor. 2. Replace the Fixing Motor. 3. Replace the DC Controller PCB.

Code: E014-0001
Description: Fixing Motor error
Causes: Error in rotation of the Fixing Motor
Solutions: 1. Check the connection of the Fixing Motor. 2. Replace the Fixing Motor. 3. Replace the DC Controller PCB.

Code: E015-0001
Description: Cassette 1 lift-up error
Causes: Cassette 1 Lifter Motor error
Solutions: 1. Check the Cassette 1 Lifter Motor (dropout, gear tooth jump, etc.). 2. Check the connector between the Cassette 1 Lifter Motor and the DC Controller PCB. 3. Replace the Cassette 1 Lifter Motor. 4. Replace the DC Controller PCB.

Code: E015-0002
Description: Cassette 2 lift-up error
Causes: Cassette 2 Lifter Motor error
Solutions: 1. Check the Cassette 2 Lifter Motor (dropout, gear tooth jump, etc.). 2. Check the connector between the Cassette 2 Lifter Motor and the Cassette 2 Driver PCB. 3. Replace the Cassette 2 Lifter Motor. 4. Replace the Cassette 2 Driver PCB.

Code: E015-0003
Description: Cassette 3 lift-up error
Causes: Cassette 3 Lifter Motor error
Solutions: 1. Check the Cassette 3 Lifter Motor (dropout, gear tooth jump, etc.). 2. Check the connector between the Cassette 3 Lifter Motor and the Cassette 3 Driver PCB. 3. Replace the Cassette 3 Lifter Motor. 4. Replace the Cassette 3 Driver PCB.

Code: E015-0004
Description: Cassette 4 lift-up error
Causes: Cassette 4 Lifter Motor error
Solutions: 1. Check the Cassette 4 Lifter Motor (dropout, gear tooth jump, etc.). 2. Check the connector between the Cassette 4 Lifter Motor and the Cassette 4 Driver PCB. 3. Replace the Cassette 4 Lifter Motor. 4. Replace the Cassette 4 Driver PCB.

Code: E015-0005
Description: Cassette 5 lift-up error
Causes: Cassette 5 Lifter Motor error
Solutions: 1. Check the Cassette 5 Lifter Motor (dropout, gear tooth jump, etc.). 2. Check the connector between the Cassette 5 Lifter Motor and the Cassette 5 Driver PCB. 3. Replace the Cassette 5 Lifter Motor. 4. Replace the Cassette 5 Driver PCB.

Code: E066-0000
Description: Environment Sensor error
Causes: Failure of the Environment Sensor was detected.
Solutions: 1. Check the connection of the Environment Sensor. 2. Replace the Environment Sensor. 3. Replace the DC Controller PCB.

Code: E100-0000
Description: Laser Scanner error
Causes: Failure of the Laser Scanner Unit
Solutions: 1. Check the connector of the Laser Scanner Unit. 2. Replace the Laser Scanner Unit. 3. Replace the DC Controller PCB.

Code: E100-0001
Description: Laser Scanner error
Causes: Failure of the Laser Assembly in the Laser Scanner Unit
Solutions: 1. Check the connector of the Laser Scanner Unit. 2. Replace the Laser Scanner Unit. 3. Replace the DC Controller PCB.

Code: E110-0000
Description: Scanner Motor error
Causes: Error in the initial operation of the Scanner Motor
Solutions: 1. Check the connector of the Laser Scanner Unit. 2. Replace the Laser Scanner Unit. 3. Replace the DC Controller PCB.

Code: E196-0001
Description: Firmware error
Causes: Engine firmware error
Solutions: 1. Turn OFF and then ON the power. 2. Update firmware. 3. Replace the DC Controller PCB.

Code: E196-0002
Description: DC Controller internal error
Causes: The memory area in the DC Controller cannot be accessed.
Solutions: 1. Turn OFF and then ON the power. 2. Update firmware. 3. Replace the DC Controller PCB.

Code: E196-0003
Description: Detection of noncompatible DC Controller
Causes: DC Controller firmware of another model was detected.
Solutions: 1. Replace the DC Controller with that of this model. 2. Update firmware.

Code: E245
Description: System error
Causes: System error
Solutions: Contact the sales company.

Code: E245-1011
Description: System error
Causes: System error
Solutions: Contact the sales company.

Code: E246
Description: System error
Causes: System error
Solutions: Contact the sales company.

Code: E247
Description: System error
Causes: System error
Solutions: Contact the sales company.

Code: E350
Description: System error
Causes: System error
Solutions: Contact the sales company.

Code: E354
Description: System error
Causes: System error
Solutions: Contact the sales company.

Code: E355
Description: System error
Causes: System error
Solutions: Contact the sales company.

Code: E602-0001
Description: Insufficient SD Card capacity
Causes: Capacity of the installed SD Card is smaller than the size of the area used for the system.
Solutions: 1. Check the capacity of the SD Card. 2. Replace the SD Card with another one with 2 GB or more capacity.

Code: E602-0002
Description: Firmware error
Causes: Loading of Bootable ends in failure.
Solutions: 1. Reinstall the firmware. 2. Replace the Main Controller PCB.

Code: E602-0003
Description: SD Card access error
Causes: Error caused by hardware (such as damage on the sector, etc.) occurred when accessing to the SD Card during execution of Boot ROM
Solutions: 1. Turn OFF and then ON the main power. 2. Back up data, and format the SD Card. 3. Replace the SD Card. 4. Replace the Main Controller PCB.

Code: E602-0006
Description: Firmware error
Causes: Loading of Subbootable ends in failure.
Solutions: 1. Reinstall the firmware. 2. Replace the Main Controller PCB.

Code: E602-0007
Description: Firmware error
Causes: Damage on the internal file
Solutions: 1. Reinstall the firmware. 2. Replace the Main Controller PCB.

Code: E602-0008
Description: The memory area in the Main Controller is depleted.
Causes: Remaining memory area in the Main Controller is small.
Solutions: * Turning OFF and then ON the main power stops the error code to be displayed, but the continuous use causes the memory area in the Main Controller PCB to be completely used up or causes symptoms such as machine freeze. 1. Replace the Main Controller PCB.

Code: E602-0009
Description: MEAP cannot be started.
Causes: MEAP cannot be started due to an error caused by invalid power down.
Solutions: Select Function.gr > MEAP > MEAP FUNCTION = ON, and turn OFF and then ON the main power. * Since the installed MEAP application and its management information are all cleared after reboot, MEAP needs to be reinstalled.

Code: E602-1102
Description: File system could not be initialized normally (MEAPrelated).
Causes: File system could not be initialized normally (MEAP-related).
Solutions: Turning OFF and then ON the main power executes auto recovery. Since E616-0001 may be displayed in some cases, execute the Solutions for E616-0001. * When this error occurs, the firmware downloaded by the CDS Updater will be lost.

Code: E602-1112
Description: Device access error (MEAP-related)
Causes: Device access error (MEAPrelated)
Solutions: Turning OFF and then ON the main power executes auto recovery. Since E616-0001 may be displayed in some cases, execute the Solutions for E616-0001. * When this error occurs, the firmware downloaded by the CDS Updater will be lost.

Code: E602-1113
Description: Device access error (MEAP-related)
Causes: Device access error (MEAPrelated)
Solutions: Turning OFF and then ON the main power executes auto recovery. Since E616-0001 may be displayed in some cases, execute the Solutions for E616-0001. * When this error occurs, the firmware downloaded by the CDS Updater will be lost.

Code: E602-1302
Description: File system could not be initialized normally.
Causes: File system could not be initialized normally.
Solutions: Turning OFF and then ON the main power executes auto recovery. * When this error occurs, the firmware downloaded by the CDS Updater will be lost.

Code: E602-1312
Description: Device access error
Causes: Device access error
Solutions: Turning OFF and then ON the main power executes auto recovery. * When this error occurs, the firmware downloaded by the CDS Updater will be lost.

Code: E602-1313
Description: Device access error
Causes: Device access error
Solutions: Turning OFF and then ON the main power executes auto recovery. * When this error occurs, the firmware downloaded by the CDS Updater will be lost.

Code: E602-1602
Description: File system could not be initialized normally (CDS-related).
Causes: File system could not be initialized normally (CDS-related).
Solutions: Turning OFF and then ON the main power executes auto recovery. * When this error occurs, the firmware downloaded by the CDS Updater will be lost.

Code: E602-1612
Description: Device access error (CDS-related)
Causes: Device access error (CDS-related)
Solutions: Turning OFF and then ON the main power executes auto recovery. * When this error occurs, the firmware downloaded by the CDS Updater will be lost.

Code: E602-1613
Description: Device access error (CDS-related)
Causes: Device access error (CDS-related)
Solutions: Turning OFF and then ON the main power executes auto recovery. * When this error occurs, the firmware downloaded by the CDS Updater will be lost.

Code: E604-0000
Description: Insufficient memory capacity
Causes: Insufficient memory capacity
Solutions: 1. Check the memory capacity of ROM mounted on the Main Controller. 2. Replace the Main Controller PCB.

Code: E604-0001
Description: Memory error
Causes: Memory required to start PDL cannot be allocated.
Solutions: Check the installed memory, remove and then install the memory, and replace the memory.

Code: E616-0001
Description: MEAP application is lost.
Causes: MEAP application is lost.
Solutions: Select Function.gr > MEAP > MEAP FUNCTION = ON, and turn OFF and then ON the main power. * The setting is switched to the following after reboot. Initial screen setting: Native MEAP authentication: Off USB-Host setting: Native CDS-related: Off

Code: E616-0002
Description: System error
Causes: System error
Solutions: Execute Setup > Initialize Menu to initialize NVRAM.

Code: E730-100A
Description: System error
Causes: System error
Solutions: 1. Turn OFF and then ON the power. 2. Replace the Main Controller PCB.

Code: E730-C000
Description: An error, such as failure in memory retrieval at initialization, occurred.
Causes: An error, such as failure in memory retrieval at initialization, occurred.
Solutions: Turning OFF and then ON the main power executes auto recovery.

Code: E730-C001
Description: An error occurred when accessing the controller.
Causes: An error occurred when accessing the controller.
Solutions: Turning OFF and then ON the main power executes auto recovery.

Code: E730-D000
Description: An error, such as failure in memory retrieval at initialization, occurred.
Causes: An error, such as failure in memory retrieval at initialization, occurred.
Solutions: 1. Turn OFF and then ON the main power. 2. Replace the Main Controller PCB.

Code: E730-D001
Description: System error
Causes: System error
Solutions: 1. Turn OFF and then ON the main power. 2. Replace the Main Controller PCB.

Code: E733-0001
Description: Printer communication error
Causes: Communication error occurred after normal startup.
Solutions: 1. Turn OFF and then ON the power. 2. Replace the Main Controller PCB.

Code: E733-0004
Description: Printer communication error
Causes: Command error
Solutions: 1. Turn OFF and then ON the power. 2. Replace the Main Controller PCB.

Code: E733-0006
Description: Printer communication error
Causes: Unknown communication error
Solutions: 1. Turn OFF and then ON the power. 2. Replace the Main Controller PCB.

Code: E740-0002
Description: An invalid MAC address has been detected.
Causes: An invalid MAC address has been detected.
Solutions: 1. Check the Mac address. 2. Replace the Main Controller PCB.

Code: E740-0004
Description: Network Chip error detection
Causes: Controller Chip access error
Solutions: 1. Turn OFF and then ON the power. 2. Replace the Main Controller PCB.

Code: E744-0800
Description: System error
Causes: System error
Solutions: Contact the sales company.

Code: E744-0900
Description: Detection of invalid Bootable
Causes: Bootable of another model was detected.
Solutions: 1. Turn OFF and then ON the power. 2. Reinstall the firmware. 3. Replace the Main Controller PCB.

Code: E744-1000
Description: Firmware error
Causes: Mismatch of the model for which the firmware was downloaded is detected.
Solutions: Install the firmware according to the model.

Code: E744-1100
Description: System error
Causes: System error
Solutions: 1. Turn OFF and then ON the power. 2. Replace the Main Controller PCB.

Code: E748-2012
Description: System error
Causes: System error
Solutions: Contact the sales company.

Code: E760-0000
Description: Firmware error
Causes: An error in connection occurred due to controller software.
Solutions: Due to firmware error, the possibility of solving the error by replacing the Main Controller PCB is low. Check the downloaded firmware again.

Code: E805-0001
Description: Fan 3 failure
Causes: Fan 3 failure
Solutions: 1. Check the connection of the Fan 3. 2. Replace the Fan 3. 3. Replace the DC Controller PCB.

Code: E805-0002
Description: Fan 1 failure
Causes: Fan 1 failure
Solutions: 1. Check the connection of the Fan 1. 2. Replace the Fan . 3. Replace the DC Controller PCB.

Code: E805-0008
Description: Fan 4 failure
Causes: Fan 4 failure
Solutions: 1. Check the connection of the Fan 4. 2. Replace the Fan 4. 3. Replace the DC Controller PCB.

Code: E805-0009
Description: Fan 2 failure
Causes: Fan 2 failure
Solutions: 1. Check the connection of the Fan 2. 2. Replace the Fan 2. 3. Replace the DC Controller PCB.

Code: E805-0010
Description: Duplex Fan failure
Causes: Duplex Fan failure
Solutions: 1. Check the connection of the Duplex Fan. 2. Replace the Duplex Fan. 3. Replace the DC Controller PCB.

Code: E808-0001
Description: Low-voltage power supply failure
Causes: Low-voltage power supply failure was detected.
Solutions: 1. Check the connection of the Power Supply PCB or the connector. 2. Check the connection of the AC Relay PCB or the connector. 3. Replace the Power Supply PCB. 4. Replace the AC Relay PCB.

Code: E840-0000
Description: Fixing disengagement error
Causes: Fixing pressure release mechanism error
Solutions: 1. Check the drawer connector between the Fixing Assembly and the Power Supply PCB. 2. Replace the Fixing Assembly. 3. Replace the Power Supply PCB.

Code: F9-nn
Description: System error
Causes: Communication error between the Main Controller and the Control Panel
Solutions: – Check for any poor contact/open circuit of the connector between the Main Controller and the Control Panel. If there is no problem with the connector but the error persists, obtain the following information and contact the department in charge of quality management. – Output STATUS PRINT/P-PRINT. – Collect Sublog – Collect information on conditions to reproduce the error

About Canon Servie Tool V5610

– Canon Service Tool V5610 is a tool used to perform maintenance on Canon printers and reset Canon printers after replacement of parts such as replacing ink absorbents, print heads, printer mainboard, and others. Based on the many cases we have encountered, the Service Tool is most often used to reset ink absorber counter value when the waste ink absorber is full.
– The ink absorber is going to be full of box, it has to be replaced or cleaned the waste ink absorber. Also, replaceing or cleaning the waste ink absorber, you need to repair or reset the waste ink counter value, cause those parts are concerned to each others.
– So using Canon Service Tool V5610 to reset the waste ink counter value becomes effective when the ink absorber is replaced or cleaned.

– Canon Service Tool V5610 can use to fix error code 5B00, 5B02, 5B04, 5B14, 1701, 1702, 1700 on your printer. You must enter Service Mode on your printer to use this Canon Service Tool.
– If the printer can not enter Service Mode, you can not reset it by Canon ST V5610. In this case, change EEPROM on the logic board.

Canon Service Tool V5610 Functions

– Fix Canon printer 7 times/ 8 times red light blinking:

– Fix Canon printer error code: 5B00, 5B01, 1700, 1701

Enter Service Mode on Canon Printer

1. Turn off a printer.
2. Press and hold the Resume/Cancel/Stop button.
3. Press and hold the ON button (do not release both buttons).
4. Release the Resume/Cancel/Stop button (do not release the ON button).
5. While holding the ON button, press the Resume/Cancel/Stop button 5 times, then release both the ON and Resume/Cancel/Stop buttons together.
– Canon printer in service mode: computer detects new hardware, led on printer goes green light.

– Download Canon driver and firmware in specific model: https://dnasofts.com/canon-mp230-printer-driver-firmware-and-user-manual-free-download/
– Download Epson driver and firmware in specific model: https://dnasofts.com/download-epson-wf-545-driver-firmware-and-manuals/

Source:
https://chiplessprinter.com/canon-service-tool-v5610.html
https://dnasofts.com
https://shop.nguyendangnam.com/
https://nguyendangnam.me/
https://chiplessprinter.com/reset-epson-waste-ink-pad-counter.html

Contact us to get support with Canon LBP351x Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/

Repair Canon LBP351x Printer Error Codes Canon Servie Tool