Repair Canon LBP3200 Printer Error Codes Canon Servie Tool
– Printer model: Canon LBP3200
– Error codes on Canon LBP3200 model and its description:
– Canon LBP3200 printer Error Codes and quick guide to troubleshooting:
- Code: 01
- Description: Smudged/Streaked. There are vertical black lines or a vertical white line in a solid black image.
- Causes: The vertical black lines are likely to have been caused by the ribs of the heater holder. The vertical white line is likely to have been caused by the thermal fuse (if it corresponds to the location of the fuse).
- Solutions: Select heavy paper mode.
- Code: 02
- Description: No Power. The machine at times fails to go on when its power is turned on after it has been turned off.
- Causes: If the machine is tuned on immediately after it has been turned off, residual power can momentarily start up the scanner motor, causing an overload (i.e., in excess of the rating indicated for power-on).
- Solutions: If the machine fails to go on, turn off its power switch; then, turn it back on after waiting for 30 sec.
- Code: 03
- Description: Malfunction/Faulty Detection. The machine does not permit correct placement of paper in its manual feed tray after it has delivered paper.
- Causes: The machine cannot recognize insertion of paper from its manual feed tray while the main motor is on (rotating rollers) after delivery.
- Solutions: Insert paper from the manual feed tray only after the main motor (roller rotation) has stopped.
- Code: 04
- Description: Jam (Main Unit). The machine identifies a jam when it is turned off and then on with paper in its manual feed section.
- Causes: The machine is designed to identify a jam if the manual feed paper sensor is on when it is tuned on, as it is not sure whether the paper is set correctly or incorrectly.
- Solutions: Remove the paper, open and close the front cover, and place the paper back in the manual feed section.
About Canon Servie Tool V5610
– Canon Service Tool V5610 is a tool used to perform maintenance on Canon printers and reset Canon printers after replacement of parts such as replacing ink absorbents, print heads, printer mainboard, and others. Based on the many cases we have encountered, the Service Tool is most often used to reset ink absorber counter value when the waste ink absorber is full.
– The ink absorber is going to be full of box, it has to be replaced or cleaned the waste ink absorber. Also, replaceing or cleaning the waste ink absorber, you need to repair or reset the waste ink counter value, cause those parts are concerned to each others.
– So using Canon Service Tool V5610 to reset the waste ink counter value becomes effective when the ink absorber is replaced or cleaned.
– Canon Service Tool V5610 can use to fix error code 5B00, 5B02, 5B04, 5B14, 1701, 1702, 1700 on your printer. You must enter Service Mode on your printer to use this Canon Service Tool.
– If the printer can not enter Service Mode, you can not reset it by Canon ST V5610. In this case, change EEPROM on the logic board.
Canon Service Tool V5610 Functions
– Fix Canon printer 7 times/ 8 times red light blinking:
– Fix Canon printer error code: 5B00, 5B01, 1700, 1701
Enter Service Mode on Canon Printer
1. Turn off a printer.
2. Press and hold the Resume/Cancel/Stop button.
3. Press and hold the ON button (do not release both buttons).
4. Release the Resume/Cancel/Stop button (do not release the ON button).
5. While holding the ON button, press the Resume/Cancel/Stop button 5 times, then release both the ON and Resume/Cancel/Stop buttons together.
– Canon printer in service mode: computer detects new hardware, led on printer goes green light.
– Download Canon driver and firmware in specific model: https://dnasofts.com/canon-ipf605-printer-driver-firmware-and-user-manual-free-download/
– Download Epson driver and firmware in specific model: https://dnasofts.com/download-epson-sp-3800-driver-firmware-and-manuals/
Source:
https://chiplessprinter.com/canon-service-tool-v5610.html
https://dnasofts.com
https://shop.nguyendangnam.com/
https://nguyendangnam.me/
https://chiplessprinter.com/reset-epson-waste-ink-pad-counter.html
Contact us to get support with Canon LBP3200 Error case
Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
