Repair Canon LBP253x Printer Error Codes Canon Servie Tool

– Printer model: Canon LBP253x
– Error codes on Canon LBP253x model and its description:

– Canon LBP253x printer Error Codes and quick guide to troubleshooting:

Code: 0104
Description: Pickup Delay Jam 1
Causes: TOP Sensor PS912
Solutions:

Code: 010C
Description: Delivery Delay Jam 1
Causes: Fixing delivery sensor PS916
Solutions:

Code: 0208
Description: Pickup Stationary Jam 1
Causes: TOP Sensor PS912
Solutions:

Code: 0210
Description: Fixing Delivery Stationary Jam 1
Causes: Fixing delivery sensor PS916
Solutions:

Code: 021C
Description: Fixing Paper Wrap Jam 1
Causes: Fixing delivery sensor PS916
Solutions:

Code: 0220
Description: Reverse Jam
Causes: Duplex reverse sensor PS917
Solutions:

Code: 0221
Description: Reverse Jam 2
Causes: Duplex reverse sensor PS917
Solutions:

Code: 1014
Description: Stationary Jam 1
Causes: TOP Sensor PS912
Solutions:

Code: 1118
Description: Door Open Jam 1
Causes: TOP Sensor PS912
Solutions:

Code: 85-0001
Description: System error
Causes: Contact the sales company.
Solutions:

Code: 85-0002
Description: System error
Causes: Contact the sales company.
Solutions:

Code: 85-0003
Description: System error
Causes: Contact the sales company.
Solutions:

Code: 85-0004
Description: System error
Causes: Auto recovery due to replacement with a new Main Controller PCB, which is a service part.
Solutions:

Code: 85-0005
Description: System error
Causes: Auto recovery due to replacement with a used Main Controller PCB.
Solutions:

Code: E000 0000
Description: Error in temperature rising of Fixing Assembly
Causes: Temperature of the Fixing Assembly did not reach a certain temperature within the specified period of time.
Solutions: 1. Check the connection of connectors between the Fixing Assembly and the Engine Controller PCB. 2.If the connector at the Fixing Assembly side does not have induction while the assembly is removed, replace the assembly. 3. Replace the Engine Controller PCB.

Code: E001 0000
Description: Abnormal high temperature of Fixing Assembly
Causes: It was detected that the temperature of the Fixing Assembly was abnormally high.
Solutions: 1. Check the connection of connectors between the Fixing Assembly and the Engine Controller PCB. 2. If the connector at the Fixing Assembly side does not have induction while the assembly is removed, replace the assembly. 3. Replace the Engine Controller PCB.

Code: E003 0000
Description: Abnormal low temperature of Fixing Assembly
Causes: After Heater turns on, Main Thermistor detected a temperature of 120 deg C or lower for more than 20 seconds.
Solutions: 1. Check the connection of connectors between the Fixing Assembly and the Engine Controller PCB. 2. If the connector at the Fixing Assembly side does not have induction while the assembly is removed, replace the assembly. 3. Replace the Engine Controller PCB.

Code: E004 0000
Description: Error in fixing power supply drive circuit
Causes: Error in either the Fixing Heater or the Main Motor
Solutions: 1. Check the connection of connectors between the Fixing Assembly and the Engine Controller PCB. 2. If the connector at the Fixing Assembly side does not have induction while the assembly is removed, replace the assembly. 3. Reconnect the connector on the Main Motor. 4. Replace the Main Motor. 5. Replace the Engine Controller PCB.

Code: E100 0000
Description: Laser Scanner error
Causes: Error is detected in the Laser Scanner or the Scanner Motor.
Solutions: 1. Reconnect the connector on Laser Scanner Unit. 2. Replace the Laser Scanner Unit.

Code: E110 0000
Description: Laser Scanner error
Causes: The Laser Scanner did not become ready although a specified period of time had passed.
Solutions: 1. Replace the Laser Scanner Unit. 2. Replace the Engine Controller PCB.

Code: E196 1000
Description: ROM writing/reading error
Causes: An error occurred when writing/reading data to/from the ROM.
Solutions: Replace the Main Controller PCB.

Code: E196 2000
Description: ROM writing/reading error
Causes: An error occurred when writing/reading data to/from the ROM.
Solutions: Replace the Main Controller PCB.

Code: E196 3000
Description: ROM writing/reading error (eMMC)
Causes: An error occurred when writing/reading data to/from the ROM.
Solutions: Replace the Main Controller PCB.

Code: E196 3001
Description: ROM-ID mismatch (eMMC)
Causes: An error occurred when writing/reading data to/from the ROM.
Solutions: Replace the Main Controller PCB.

Code: E246 0000
Description: System error
Causes: System error
Solutions: Contact the service company office

Code: E247 0000
Description: System error
Causes: System error
Solutions: Contact the service company office

Code: E350 0000
Description: System error
Causes: System error
Solutions: Contact the service company office

Code: E351 0000
Description: System error
Causes: System error
Solutions: Contact the service company office

Code: E354 0000
Description: System error
Causes: System error
Solutions: Contact the service company office

Code: E355 0000
Description: System error
Causes: System error
Solutions: Contact the service company office

Code: E355 0004
Description: System error
Causes: System error
Solutions: Contact the service company office

Code: E355 0005
Description: System error
Causes: System error
Solutions: Contact the service company office

Code: E733 0000
Description: Printer communication error
Causes: Communication error occurred after normal startup.
Solutions: 1. Turn OFF and then ON the main power. 2. Replace the Main Controller PCB.

Code: E744 0001
Description: Invalid combination of language file versions
Causes: Mismatch of the model for which the firmware was downloaded is detected.
Solutions: Install the firmware according to the model

Code: E744 0002
Description: Language file error
Causes: Mismatch of the model for which the firmware was downloaded is detected.
Solutions: Install the firmware according to the model

Code: E744 1001
Description: Version mismatch
Causes: Mismatch of the model for which the firmware was downloaded is detected.
Solutions: Install the firmware according to the model

Code: E744 4000
Description: Detection of firmware of another model
Causes: Mismatch of the model for which the firmware was downloaded is detected.
Solutions: Install the firmware according to the model

Code: E744 5000
Description: Panel microcomputer error
Causes: Mismatch of the model for which the firmware was downloaded is detected.
Solutions: Install the firmware according to the model

Code: E744 6000
Description: Error in communication with the Wireless LAN Board
Causes: Mismatch of the model for which the firmware was downloaded is detected.
Solutions: 1. Check the connection of the Wireless LAN Board. 2. Install the firmware according to the model 3. Replace the Main Controller PCB.

Code: E744 7000
Description: Backup microcomputer error
Causes: Mismatch of the model for which the firmware was downloaded is detected.
Solutions: 1. Install the firmware according to the model 2. Replace the Main Controller PCB.

Code: E746 0000
Description: Main Controller PCB error
Causes: Microcomputer error
Solutions: Install the firmware according to the model Replace the Main Controller PCB.

Code: E748 2012
Description: System error
Causes: System error
Solutions: Contact the service company office

Code: E760 0000
Description: Firmware error
Causes: An error due to the controller software occurred so that print could not be proceeded.
Solutions: Due to firmware error, the possibility of solving the error by replacing the Main Controller PCB is low. Check the downloaded firmware again.

Code: E805 0000
Description: Main Fan error
Causes: Main Fan failure is detected.
Solutions: 1. Check the Main Fan or the connector. 2. Replace the Main Fan 3. Replace the Main Controller PCB.

About Canon Servie Tool V5610

– Canon Service Tool V5610 is a tool used to perform maintenance on Canon printers and reset Canon printers after replacement of parts such as replacing ink absorbents, print heads, printer mainboard, and others. Based on the many cases we have encountered, the Service Tool is most often used to reset ink absorber counter value when the waste ink absorber is full.
– The ink absorber is going to be full of box, it has to be replaced or cleaned the waste ink absorber. Also, replaceing or cleaning the waste ink absorber, you need to repair or reset the waste ink counter value, cause those parts are concerned to each others.
– So using Canon Service Tool V5610 to reset the waste ink counter value becomes effective when the ink absorber is replaced or cleaned.

– Canon Service Tool V5610 can use to fix error code 5B00, 5B02, 5B04, 5B14, 1701, 1702, 1700 on your printer. You must enter Service Mode on your printer to use this Canon Service Tool.
– If the printer can not enter Service Mode, you can not reset it by Canon ST V5610. In this case, change EEPROM on the logic board.

Canon Service Tool V5610 Functions

– Fix Canon printer 7 times/ 8 times red light blinking:

– Fix Canon printer error code: 5B00, 5B01, 1700, 1701

Enter Service Mode on Canon Printer

1. Turn off a printer.
2. Press and hold the Resume/Cancel/Stop button.
3. Press and hold the ON button (do not release both buttons).
4. Release the Resume/Cancel/Stop button (do not release the ON button).
5. While holding the ON button, press the Resume/Cancel/Stop button 5 times, then release both the ON and Resume/Cancel/Stop buttons together.
– Canon printer in service mode: computer detects new hardware, led on printer goes green light.

– Download Canon driver and firmware in specific model: https://dnasofts.com/canon-cp1200-gold-printer-driver-firmware-and-user-manual-free-download/
– Download Epson driver and firmware in specific model: https://dnasofts.com/download-epson-readyprint-service-driver-firmware-and-manuals/

Source:
https://chiplessprinter.com/canon-service-tool-v5610.html
https://dnasofts.com
https://shop.nguyendangnam.com/
https://nguyendangnam.me/
https://chiplessprinter.com/reset-epson-waste-ink-pad-counter.html

Contact us to get support with Canon LBP253x Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/

Repair Canon LBP253x Printer Error Codes Canon Servie Tool