Repair Canon LBP151dw Printer Error Codes Canon Servie Tool
– Printer model: Canon LBP151dw
– Error codes on Canon LBP151dw model and its description:
– Canon LBP151dw printer Error Codes and quick guide to troubleshooting:
- Code: 0004
- Description: Re-pickup Delay Jam
- Causes: PS751
- Solutions:
- Code: 0005
- Description: Multi-purpose tray pickup delay jam
- Causes: PS701
- Solutions:
- Code: 0008
- Description: Pickup Stationary Jam
- Causes: PS751
- Solutions:
- Code: 000C
- Description: Fixing Delivery Delay Jam
- Causes:
- Solutions:
- Code: 0010
- Description: Fixing Delivery Stationary Jam
- Causes:
- Solutions:
- Code: 0014
- Description: Internal Paper Jam
- Causes:
- Solutions:
- Code: 0018
- Description: Door Open Jam
- Causes: PS701,PS751
- Solutions:
- Code: 001C
- Description: Wrap Jam
- Causes: PS701,PS751
- Solutions:
- Code: 0020
- Description: Reversal Delay Jam
- Causes: PS701
- Solutions:
- Code: 0021
- Description: Reversal Stationary Jam
- Causes: PS701
- Solutions:
- Code: E000-0000
- Description: Fixing temperature control startup error
- Causes: Temperature of the Fixing Assembly did not reach the specified temperature within the specified period of time.
- Solutions: When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following Solutions. 1. Check connectors on the fixing unit. 2. Replace the fixing unit. 3. Replace the engine controller PCB.
- Code: E001-0000
- Description: Abnormal high temperature of Fixing Assembly
- Causes: The detected temperature of the thermistor is 220 deg C or higher 30 times consecutively
- Solutions: When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following Solutions. 1. Check connectors on the fixing unit. 2. Replace the fixing unit. 3. Replace the engine controller PCB.
- Code: E003-0000
- Description: Abnormal low temperature of Fixing Assembly
- Causes: After the heater is turned on, the detected temperature of the thermistor is 100 deg C or lower at the time of printing after reaching 50 deg C. • After the heater is turned on, the detected temperature of the thermistor is 55 deg C or lower at paper intervals or in cleaning mode after reaching 50 deg C.
- Solutions: When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following Solutions. 1. Check connectors on the fixing unit. 2. Replace the fixing unit. 3. Replace the engine controller PCB.
- Code: E004-0000
- Description: Fixing Heater drive circuit error
- Causes: An abnormal frequency is detected on the fixing drive circuit within approx. 3.3 sec of the power being turned on.
- Solutions: When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following Solutions. 1. Check connectors on the fixing unit. 2. Replace the fixing unit. 3. Replace the engine controller PCB.
- Code: E100-0001
- Description: Scanner area failure
- Causes: Error in the Scanner Motor, Laser Unit, or BD detection in the scanner area
- Solutions: When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following Solutions. 1. Replace the scanner unit. 2. Replace the engine controller PCB.
- Code: E196-2000
- Description: Error in main controller communication
- Causes: Access to the Flash ROM in the Main Controller failed.
- Solutions: When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following Solutions. 1. Replace the Main Controller PCB.
- Code: E744-0002
- Description: Language file error
- Causes: Language file error
- Solutions: When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following Solutions. 1. Update the firmware of the Main Controller PCB. 2. Replace the Main Controller PCB.
- Code: E744-4000
- Description: Engine ID error
- Causes: Invalid engine connection was detected.
- Solutions: When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following Solutions. 1. Replace the engine controller PCB. 2. Update the firmware of the Main Controller PCB 3. Replace the Main Controller PCB.
- Code: E744-6000
- Description: Wireless LAN communication error
- Causes: Communication error between the Main Controller PCB and the wireless LAN
- Solutions: When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following Solutions. 1. Check connectors on the Main Controller PCB and Wireless LAN PCB. 2. Replace the Wireless LAN PCB 3. Replace the Main Controller PCB.
- Code: E760-0001
- Description: Main Controller PCB error
- Causes: Image processing error
- Solutions: When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following Solutions. 1. Update the firmware of the Main Controller PCB. 2. Replace the Main Controller PCB.
- Code: E806-0000
- Description: Fan error
- Causes: The Fan Motor (FAN1) cannot rotate at the specified revolution.
- Solutions: When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following Solutions. 1. Replace the Main Fan (FAN1) unit. 2. Replace the Engine Controller PCB.
- Code: E808-0001
- Description: Fan error
- Causes: Error in the Edge Left Cooling Fan (FAN3) of the Fixing Assembly
- Solutions: When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following Solutions. 1. Replace the Edge Left Cooling Fan (FAN3) of the Fixing Assembly. 2. Replace the Engine Controller PCB.
- Code: E808-0002
- Description: Fan error
- Causes: Error in the Edge Right Cooling Fan (FAN2) of the Fixing Assembly
- Solutions: When the same error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following Solutions. 1. Replace the Edge Right Cooling Fan (FAN2) of the Fixing Assembly. 2. Replace the Engine Controller PCB.
About Canon Servie Tool V5610
– Canon Service Tool V5610 is a tool used to perform maintenance on Canon printers and reset Canon printers after replacement of parts such as replacing ink absorbents, print heads, printer mainboard, and others. Based on the many cases we have encountered, the Service Tool is most often used to reset ink absorber counter value when the waste ink absorber is full.
– The ink absorber is going to be full of box, it has to be replaced or cleaned the waste ink absorber. Also, replaceing or cleaning the waste ink absorber, you need to repair or reset the waste ink counter value, cause those parts are concerned to each others.
– So using Canon Service Tool V5610 to reset the waste ink counter value becomes effective when the ink absorber is replaced or cleaned.
– Canon Service Tool V5610 can use to fix error code 5B00, 5B02, 5B04, 5B14, 1701, 1702, 1700 on your printer. You must enter Service Mode on your printer to use this Canon Service Tool.
– If the printer can not enter Service Mode, you can not reset it by Canon ST V5610. In this case, change EEPROM on the logic board.
Canon Service Tool V5610 Functions
– Fix Canon printer 7 times/ 8 times red light blinking:
– Fix Canon printer error code: 5B00, 5B01, 1700, 1701
Enter Service Mode on Canon Printer
1. Turn off a printer.
2. Press and hold the Resume/Cancel/Stop button.
3. Press and hold the ON button (do not release both buttons).
4. Release the Resume/Cancel/Stop button (do not release the ON button).
5. While holding the ON button, press the Resume/Cancel/Stop button 5 times, then release both the ON and Resume/Cancel/Stop buttons together.
– Canon printer in service mode: computer detects new hardware, led on printer goes green light.
– Download Canon driver and firmware in specific model: https://dnasofts.com/canon-cp-300-printer-driver-firmware-and-user-manual-free-download/
– Download Epson driver and firmware in specific model: https://dnasofts.com/download-epson-c823622-driver-firmware-and-manuals/
Source:
https://chiplessprinter.com/canon-service-tool-v5610.html
https://dnasofts.com
https://shop.nguyendangnam.com/
https://nguyendangnam.me/
https://chiplessprinter.com/reset-epson-waste-ink-pad-counter.html
Contact us to get support with Canon LBP151dw Error case
Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
