Repair Canon D1520 Printer Error Codes Canon Servie Tool

Repair Canon D1520 Printer Error Codes Canon Servie Tool

– Printer model: Canon D1520
– Error codes on Canon D1520 model and its description:

– Canon D1520 printer Error Codes and quick guide to troubleshooting:

• Code: 0001
• Description: Delay Jam
• Causes: Document End Sensor PS2
• Solutions:

• Code: 0002
• Description: Stationary Jam
• Causes: Document End Sensor PS2
• Solutions:

• Code: 0004
• Description: Delay Jam
• Causes: Document End Sensor (2nd side) PS2
• Solutions:

• Code: 0005
• Description: Stationary Jam
• Causes: Document End Sensor (2nd side) PS2
• Solutions:

• Code: 0071
• Description: Sequence jam
• Causes: Timing error
• Solutions:

• Code: 0094
• Description: Power-on jam
• Causes: Document End Sensor PS2
• Solutions:

• Code: 0104
• Description: Pickup Delay Jam 1
• Causes: Top Sensor PS204
• Solutions:

• Code: 010C
• Description: Fixing Delivery Delay Jam 1
• Causes: Fixing Delivery Sensor PS915
• Solutions:

• Code: 0144
• Description: Pickup Delay Jam 1
• Causes: Top Sensor PS204
• Solutions:

• Code: 014C
• Description: Fixing Delivery Delay Jam 1
• Causes: Fixing Delivery Sensor PS915
• Solutions:

• Code: 0184
• Description: Pickup Delay Jam 1
• Causes: Top Sensor PS204
• Solutions:

• Code: 018C
• Description: Fixing Delivery Delay Jam 1
• Causes: Fixing Delivery Sensor PS915
• Solutions:

• Code: 01C4
• Description: Pickup Delay Jam 1
• Causes: Top Sensor PS204
• Solutions:

• Code: 01CC
• Description: Fixing Delivery Delay Jam 1
• Causes: Fixing Delivery Sensor PS915
• Solutions:

• Code: 0208
• Description: Pickup Stationary Jam 1
• Causes: Top Sensor PS204
• Solutions:

• Code: 0210
• Description: Fixing Delivery Stationary Jam 1
• Causes: Fixing Delivery Sensor PS915
• Solutions:

• Code: 021C
• Description: Paper Wrap Jam 1
• Causes: Fixing Delivery Sensor PS915
• Solutions:

• Code: 0220
• Description: Reverse area Jam
• Causes: Duplex Reverse Sensor PS201
• Solutions:

• Code: 0221
• Description: Reverse area Jam 2
• Causes: Duplex Reverse Sensor PS201
• Solutions:

• Code: 0248
• Description: Pickup Stationary Jam 1
• Causes: Top Sensor/ Media Width Sensor/ Fixing Delivery Sensor PS204/PS205/ PS915
• Solutions:

• Code: 0250
• Description: Fixing Delivery Stationary Jam 1
• Causes: Fixing Delivery Sensor PS915
• Solutions:

• Code: 025C
• Description: Paper Wrap Jam 1
• Causes: Fixing Delivery Sensor PS915
• Solutions:

• Code: 0260
• Description: Reverse area Jam
• Causes: Duplex Reverse Sensor PS201
• Solutions:

• Code: 0261
• Description: Reverse area Jam 2
• Causes: Duplex Reverse Sensor PS201
• Solutions:

• Code: 0288
• Description: Pickup Stationary Jam 1
• Causes: Top Sensor/ Media Width Sensor/ Fixing Delivery Sensor PS204/PS205/ PS915
• Solutions:

• Code: 0290
• Description: Fixing Delivery Stationary Jam 1
• Causes: Fixing Delivery Sensor PS915
• Solutions:

• Code: 029C
• Description: Paper Wrap Jam 1
• Causes: Fixing Delivery Sensor PS915
• Solutions:

• Code: 02A0
• Description: Reverse area Jam
• Causes: Duplex Reverse Sensor PS201
• Solutions:

• Code: 02A1
• Description: Reverse area Jam 2
• Causes: Duplex Reverse Sensor PS201
• Solutions:

• Code: 02C8
• Description: Pickup Stationary Jam 1
• Causes: Top Sensor/ Media Width Sensor/ Fixing Delivery Sensor PS204/PS205/ PS915
• Solutions:

• Code: 02D0
• Description: Fixing Delivery Stationary Jam 1
• Causes: Fixing Delivery Sensor PS915
• Solutions:

• Code: 02DC
• Description: Paper Wrap Jam 1
• Causes: Fixing Delivery Sensor PS915
• Solutions:

• Code: 02E0
• Description: Reverse area Jam
• Causes: Duplex Reverse Sensor PS201
• Solutions:

• Code: 02E1
• Description: Reverse area Jam 2
• Causes: Duplex Reverse Sensor PS201
• Solutions:

• Code: 1014
• Description: Internal Residual Jam 1
• Causes: Top Sensor/ Media Width Sensor/ Fixing Delivery Sensor/ Duplex Reverse Sensor PS204/PS205/ PS915/ PS201
• Solutions:

• Code: 1054
• Description: Internal Residual Jam 1
• Causes: Top Sensor/ Media Width Sensor/ Fixing Delivery Sensor/ Duplex Reverse Sensor PS204/PS205/ PS915/ PS201
• Solutions:

• Code: 1094
• Description: Internal Residual Jam 1
• Causes: Top Sensor/ Media Width Sensor/ Fixing Delivery Sensor/ Duplex Reverse Sensor PS204/PS205/ PS915/ PS201
• Solutions:

• Code: 10D4
• Description: Internal Residual Jam 1
• Causes: Top Sensor/ Media Width Sensor/ Fixing Delivery Sensor/ Duplex Reverse Sensor PS204/PS205/ PS915/ PS201
• Solutions:

• Code: 1118
• Description: Door Open Jam 1
• Causes: Top Sensor/ Media Width Sensor/ Fixing Delivery Sensor/ Duplex Reverse Sensor PS204/PS205/ PS915/ PS201
• Solutions:

• Code: 1158
• Description: Door Open Jam 1
• Causes: Top Sensor/ Media Width Sensor/ Fixing Delivery Sensor/ Duplex Reverse Sensor PS204/PS205/ PS915/ PS201
• Solutions:

• Code: 1198
• Description: Door Open Jam 1
• Causes: Top Sensor/ Media Width Sensor/ Fixing Delivery Sensor/ Duplex Reverse Sensor PS204/PS205/ PS915/ PS201
• Solutions:

• Code: 11D8
• Description: Door Open Jam 1
• Causes: Top Sensor/ Media Width Sensor/ Fixing Delivery Sensor/ Duplex Reverse Sensor PS204/PS205/ PS915/ PS201
• Solutions:

• Code: E000-0000
• Description: Error in temperature rising of Fixing Assembly
• Causes: Temperature of the Fixing Assembly did not reach a certain temperature within the specified period of time.
• Solutions: 1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

• Code: E001-0000
• Description: Abnormal high temperature of Fixing Assembly
• Causes: It was detected that the temperature of the Fixing Assembly was abnormally high.
• Solutions: 1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

• Code: E003-0000
• Description: Abnormal low temperature of Fixing Assembly
• Causes: It was detected that the temperature of the Fixing Assembly was abnormally low.
• Solutions: 1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

• Code: E004-0000
• Description: Error in fixing power supply drive circuit
• Causes: The zero cross signal was not detected for the specified period of time or more.
• Solutions: 1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

• Code: E014-0000
• Description: Error in startup of the Main Motor
• Causes: Revolution of the Main Motor did not reach the specified value.
• Solutions: 1. Check the connector connection between the Main Motor and the Engine Controller PCB. 2. Replace the Main Motor. 3. Replace the Engine Controller PCB.

• Code: E100-0000
• Description: Laser Scanner Assembly error
• Causes: BD cycle of the Laser Scanner Unit was not within the specified range.
• Solutions: 1. Check the connector connection between the Main Controller PCB and the Laser Scanner Unit. 2. Check the connector connection between the Relay PCB and the Laser Scanner Unit. 3. Replace the Laser Scanner Unit.

• Code: E196-2000
• Description: Main Controller PCB writing/reading error
• Causes: Error in writing/reading of the setting values storage area in the Main Controller PCB
• Solutions: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.

• Code: E196-3000
• Description: ROM writing/reading error (eMMC)
• Causes: An error occurred when writing/reading data to/ from the ROM.
• Solutions: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.

• Code: E196-3001
• Description: ROM-ID mismatch (eMMC)
• Causes: An error occurred when writing/reading data to/ from the ROM.
• Solutions: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.

• Code: E202-0001
• Description: CIS Unit HP error (outward)
• Causes: The CIS Unit did not move to HP even it moved backward. Reader HP Sensor error, Reader Motor error, CIS Unit error
• Solutions: 1. Replace the Reader HP Sensor. 2. Replace the Reader Motor. 3. Replace the CIS Unit. 4. Replace the Reader Unit.

• Code: E202-0002
• Description: CIS Unit HP error (homeward)
• Causes: The CIS Unit did not move to HP even it moved forward. Reader HP Sensor error, Reader Motor error, CIS Unit error
• Solutions: 1. Replace the Reader HP Sensor. 2. Replace the Reader Motor. 3. Replace the CIS Unit. 4. Replace the Reader Unit.

• Code: E302-0001
• Description: Light intensity of the CIS Unit below the reference level
• Causes: When the light intensity is below the reference level at shading
• Solutions: 1. Disconnect and then connect the Flexible Cable. 2. Replace the Flexible Cable. 3. Replace the CIS Unit. 4. Replace the Main Controller PCB (PCB2).

• Code: E732-0000
• Description: Scanner communication error
• Causes: Scanner communication error
• Solutions: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.

• Code: E733-0000
• Description: Printer communication error
• Causes: Communication error between the Engine Controller PCB and the Main Controller PCB occurred.
• Solutions: 1. Check the connector connection between the Engine Controller PCB and the Main Controller PCB. 2. Install the set of the controller firmware. 3. Replace the Main Controller PCB. 4. Replace the Engine Controller PCB.

• Code: E736-0000
• Description: Communication error with CCU/modem
• Causes: Communication error with CCU/modem, NCU PCB type error
• Solutions: 1. Install the set of the controller firmware. 2. Replace the NCU PCB. 3. Replace the Main Controller PCB.

• Code: E736-0001
• Description: Error in ROM for backing up fax data
• Causes: An error occurred in ROM for backing up fax data
• Solutions: 1. Install the set of the controller firmware. 2. Replace the NCU PCB. 3. Replace the Main Controller PCB.

• Code: E744-4000
• Description: Engine ID error
• Causes: Invalid engine connection was detected.
• Solutions: 1. Turn OFF and then ON the main power. 2. Check the Engine Controller PCB. 3. Install the Engine Controller PCB. 4. Install the set of the controller firmware. 5. Check the model code. (When the model code and the engine code are mismatched, E744-4000 occurs.)

• Code: E744-5000
• Description: Error in the Control Panel PCB
• Causes: Error in the Control Panel PCB (microcomputer)
• Solutions: 1. Check the Control Panel PCB, and install the firmware (PANEL). 2. Install the set of the controller firmware. 3. Replace the Main Controller PCB.

• Code: E744-6000
• Description: Communication error with Wireless LAN PCB
• Causes: Communication with the Wireless LAN PCB could not be established.
• Solutions: 1. Turn OFF and then ON the main power. 2. Check the connection of the Wireless LAN PCB. 3. Install the set of the controller firmware. 4. Replace the Wireless LAN PCB. 5. Replace the Main Controller PCB.

• Code: E804-0004
• Description: Controller Fan error
• Causes: Since the startup of the Controller Fan, the Fan was locked for a specified consecutive period of time.
• Solutions: 1. Check power supply to the Controller Fan. 2. Replace the Controller Fan.

• Code: E805-0000
• Description: Main Fan error
• Causes: The Main Fan was locked for a specified consecutive period of time.
• Solutions: 1. Check the connection of the Main Fan. 2. Replace the Main Fan.

• Code: E808-0000
• Description: Low-voltage power supply failure detection
• Causes: Printer detected low-voltage power supply failure.
• Solutions: 1. Replace the Engine Controller PCB.

About Canon Servie Tool V5610

– Canon Service Tool V5610 is a tool used to perform maintenance on Canon printers and reset Canon printers after replacement of parts such as replacing ink absorbents, print heads, printer mainboard, and others. Based on the many cases we have encountered, the Service Tool is most often used to reset ink absorber counter value when the waste ink absorber is full.
– The ink absorber is going to be full of box, it has to be replaced or cleaned the waste ink absorber. Also, replaceing or cleaning the waste ink absorber, you need to repair or reset the waste ink counter value, cause those parts are concerned to each others.
– So using Canon Service Tool V5610 to reset the waste ink counter value becomes effective when the ink absorber is replaced or cleaned.

– Canon Service Tool V5610 can use to fix error code 5B00, 5B02, 5B04, 5B14, 1701, 1702, 1700 on your printer. You must enter Service Mode on your printer to use this Canon Service Tool.
– If the printer can not enter Service Mode, you can not reset it by Canon ST V5610. In this case, change EEPROM on the logic board.

Canon Service Tool V5610 Functions

– Fix Canon printer 7 times/ 8 times red light blinking:

– Fix Canon printer error code: 5B00, 5B01, 1700, 1701

Enter Service Mode on Canon Printer

1. Turn off a printer.
2. Press and hold the Resume/Cancel/Stop button.
3. Press and hold the ON button (do not release both buttons).
4. Release the Resume/Cancel/Stop button (do not release the ON button).
5. While holding the ON button, press the Resume/Cancel/Stop button 5 times, then release both the ON and Resume/Cancel/Stop buttons together.
– Canon printer in service mode: computer detects new hardware, led on printer goes green light.

– Download Canon driver and firmware in specific model: https://dnasofts.com/canon-cp1200-printer-driver-firmware-and-user-manual-free-download/
– Download Epson driver and firmware in specific model: https://dnasofts.com/download-epson-lq-670-driver-firmware-and-manuals/

Source:
https://chiplessprinter.com/canon-service-tool-v5610.html
https://dnasofts.com
https://shop.nguyendangnam.com/
https://nguyendangnam.me/
https://chiplessprinter.com/reset-epson-waste-ink-pad-counter.html

Contact us to get support with Canon D1520 Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/