Panasonic FP7713 Error Codes list and fixing solutions
– Compatible Printer model: Panasonic FP7713
– Panasonic FP7713 Error Code List and description errors:
- Code: E1-01
- Description: Scan home problem
- Code: E1-21
- Description: Half speed scan home sensor problem
- Code: E1-22
- Description: 5th & 6th mirror unit sensor problem
- Code: E1-23
- Description: Original registration input problem
- Code: E1-32
- Description: No density detection of auto original
- Code: E1-40
- Description: Optics fan not A working
- Code: E1-41
- Description: Optics fan B not working
- Code: E2-20
- Description: Bypass feed sensor
- Code: E3-03
- Description: Toner density sensor
- Code: E3-10
- Description: High voltage problem
- Code: E3-20
- Description: Drive problem
- Code: E3-22
- Description: blanking prevention film problem
- Code: E3-29
- Description: Discharge lamp problem
- Code: E4-01
- Description: Low fuser temperature
- Code: E4-10
- Description: Fuser fan problem
- Code: E5-01
- Description: 24 volt problem
- Code: E5-04
- Description: 10 volt problem
- Code: E5-35
- Description: EEPROM problem
- Code: J00
- Description: Bypass feed jam
- Code: J01
- Description: Cassette feed jam
- Code: J02
- Description: Paper feed unit jam
- Code: J06
- Description: Paper feed unit jam
- Code: J08
- Description: Bypass feed jam
- Code: J19
- Description: Bypass feed jam
– Panasonic FP7713 Error codes and solution steps to fix:
- Code: J20
- Description: Paper feed jam
- Code: J21
- Description: Paper jam in registration area
- Code: J30
- Description: Paper jam in center of machine
- Code: J40
- Description: Fuser exit jam
- Code: J41
- Description: Fuser exit jam
- Code: J70
- Description: ADF jam
- Code: o
- Description: In power save mode. Press any key
- Code: O
- Description: In standby mode. Press any key
- Code: P-
- Description: Add paper
- Code: U10
- Description: Document feeder interlock
- Code: U13
- Description: Add toner. Could also be toner density sensor, toner feed system, or main board. Note: To clear U13, any key must be pressed. If this does not clear the U13, see F5-63 to determine which keys for which machine must be pressed.
- Code: U16
- Description: Developer unit not installed properly, or connector problem.
- Code: U6
- Description: Paper feed console interlock
Contact us to get support with Panasonic FP7713 Error case
Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/