Panasonic DP1820P Error Codes list and fixing solutions

Panasonic DP1820P Error Codes list and fixing solutions

– Compatible Printer model: Panasonic DP1820P
– Panasonic DP1820P Error Code List and description errors:

• Code: E1-01
• Description: Abnormal Platen Glass Scanning
• Causes: 1. Home Position Sensor connector disconnected. 2. Home Position Sensor defective. 3. Scanner Motor connector disconnected. 4. Scanner Motor defective. 5. Scanning Mechanism defective. 6. SPC PCB connector disconnected. 7. SPC PCB defective. 8. PS defective.

• Code: E1-20
• Description: Laser Unit Horizontal Synchronization
• Causes: 1. LSU connector disconnected. 2. LSU defective. 3. SPC PCB connector disconnected. 4. SPC PCB defective.

• Code: E1-22
• Description: Polygon Motor Synchronization
• Causes: 1. Polygon Motor connector disconnected. 2. SPC PCB connector disconnected. 3. LSU connector disconnected. 4. Polygon Motor defective. 5. PS defective. 6. SPC PCB defective.

• Code: E1-31
• Description: Scanning Lamp (Does not turn On)
• Causes: 1. INV PCB connector disconnected. 2. INV PCB defective. 3. Scanning Lamp defective. 4. SPC PCB connector disconnected. 5. PS defective.

• Code: E13
• Description: No Toner Detection
• Causes: 1. Out of Toner. 2. Toner Bottle not installed. 3. Toner Bottle not installed correctly. 4. Toner Sensor disconnected. 5. Toner Sensor defective. 6. SPC PCB connector disconnected. 7. SPC PCB defective.

• Code: E2-01
• Description: Lift Motor Rotation (1st Paper Tray)
• Causes: 1. Level Sensor connector disconnected. 2. Level Sensor defective. 3. Lift Mech7. SPC PCB defective. anism defective. 4. Lift Motor connector disconnected. 5. Lift Motor defective. 6. SPC PCB connector disconnected. 8. PS defective.

• Code: E2-02
• Description: Lift Motor Rotation (2nd Paper Tray)
• Causes: 1. Level Sensor connector disconnected. 2. Level Sensor defective. 3. Lift Mech7. SPC PCB defective. anism defective. 4. Lift Motor connector disconnected. 5. Lift Motor defective. 6. SPC PCB connector disconnected. 8. PS defective.

• Code: E2-03
• Description: Lift Motor Rotation (3rd Paper Tray)
• Causes: 1. Level Sensor connector disconnected. 2. Level Sensor defective. 3. Lift Mech7. SPC PCB defective. anism defective. 4. Lift Motor connector disconnected. 5. Lift Motor defective. 6. SPC PCB connector disconnected. 8. PS defective.

• Code: E2-04
• Description: Lift Motor Rotation (4th Paper Tray)
• Causes: 1. Level Sensor connector disconnected. 2. Level Sensor defective. 3. Lift Mech7. SPC PCB defective. anism defective. 4. Lift Motor connector disconnected. 5. Lift Motor defective. 6. SPC PCB connector disconnected. 8. PS defective.

• Code: E2-10
• Description: System Console Drive Motor Rotation
• Causes: 1. Drive Mechanism defective. 2. Drive Motor connector disconnected. 3. Drive Motor defective. 4. CST2 PCB connector disconnected. 5. CST3 PCB connector disconnected. 6. CST3 PCB defective. 7. PS connector disconnected. 8. PS defective. 9. SPC PCB connector disconnected. 10. SPC PCB defective.

• Code: E3-01
• Description: Toner Bottle Motor Rotation
• Causes: 1. Toner Bottle Motor connector disconnected. 2. Toner Bottle Motor defective. 3. Toner Bottle Motor Drive Mechanism defective. 4. Toner Bottle installed incorrectly. 5. SPC PCB connector disconnected. 6. SPC PCB defective. 7. Toner Bottle Home Position Sensor connector disconnected. 8. Toner Bottle Home Position Sensor defective.

• Code: E3-02
• Description: Toner Screw Motor Over Current
• Causes: 1. Toner Screw Motor defective. 2. Toner Screw Motor Drive Mechanism defective. 3. SPC PCB defective.

• Code: E3-03
• Description: Toner Density Sensor Gain
• Causes: 1. Sensor connector disconnected. 2. Sensor defective. 3. SPC PCB connector disconnected. 4. SPC PCB defective.

• Code: E3-10
• Description: High Voltage Power Supply leak (1) – Grid Charge Voltage
• Causes: 1. PS connector disconnected. 2. PS defective. 3. SPC PCB connector disconnected. 4. SPC PCB defective. 5. Corona Wire is abnormal. (Check for: contamination with foreign particles, broken, not installed in the proper position or loose tension)

• Code: E3-20
• Description: Main Motor Rotation
• Causes: 1. Drive Mechanism defective. 2. Main Motor connector disconnected. 3. Main Motor defective. 4. SPC PCB connector disconnected. 5. SPC PCB defective. 6. PS defective.

• Code: E4-01
• Description: Fuser Warm-up Temperature
• Causes: 1. Fuser Thermistor dirty. 2. Thermistor position incorrect. 3. Thermistor defective. 4. Thermistor connector disconnected. 5. Fuser Lamp connector disconnected. 6. Fuser Lamp defective. 7. Fuser Thermostat defective. 8. Thermal Fuse defective. 9. SPC PCB connector disconnected. 10. SPC PCB defective. 11. Fuser temperature low. (Adjust F6-31)

• Code: E4-02
• Description: Fuser Paper Jam
• Causes: 1. Paper Jam in Fuser Unit. 2. Paper Exit Sensor disconnected. 3. Paper Exit Sensor defective. 4. SPC PCB connector disconnected. 5. SPC PCB defective.

• Code: E4-10
• Description: Fuser Fan Motor Rotation
• Causes: 1. Fuser Fan connector disconnected. 2. Fuser Fan defective. 3. SPC PCB connector disconnected. 4. SPC PCB defective. 5. PS defective.

• Code: E5-11
• Description: Printer Engine Communication Abnormal
• Causes: 1. SPC PCB connector disconnected. 2. SPC PCB defective. 3. SC PCB connector disconnected. 4. SC PCB defective.

• Code: E5-17
• Description: Scanner Synchronization
• Causes: 1. SPC PCB connector disconnected. 2. SPC PCB defective. 3. SC PCB connector disconnected. 4. SC PCB defective.

• Code: E5-19
• Description: Scanner Line Synchronization
• Causes: 1. SPC PCB connector disconnected. 2. SPC PCB defective. 3. SC PCB connector disconnected. 4. SC PCB defective.

• Code: E5-40
• Description: Sort Memory Abnormal
• Causes: 1. Sort Memory defective. 2. SC PCB connector disconnected. 3. SC PCB defective.

• Code: E5-42
• Description: Total Counter Connection
• Causes: 1. Total Counter connector disconnected. 2. Total Counter defective. 3. SPC PCB connector disconnected. 4. SPC PCB defective.

• Code: E5-60
• Description: Power Supply Cooling Fan Motor Rotation
• Causes: 1. Cooling Fan connector disconnected. 2. Cooling Fan defective. 3. SPC PCB connector disconnected. 4. SPC PCB defective. 5. PS defective.

– Panasonic DP1820P Error codes and solution steps to fix:

• Code: E7-90
• Description: Hard Key Abnormal
• Causes: 1. Wrong Hand Key installed. 2. Hard Key defective.

Contact us to get support with Panasonic DP1820P Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/