Mimaki JV5-160S Error Codes and quick guides [Solved]

Fixing Mimaki JV5-160S Error Codes list

– Compatible Printer model: Mimaki JV5-160S
– Mimaki JV5-160S Error Code description:

• Code: 1-0
• Display: ***** ERROR 01 ***** MAIN ROM
• Description: Error on Control ROM

• Code: 10-0
• Display: ***** ERROR 10 ***** COMMAND ERROR
• Description: Command Unidentified

• Code: 11-0
• Display: ***** ERROR 11 ***** PARAMETER ERROR
• Description: Error on Value of Command

• Code: 111-00
• Display: E111 NCU ROM 00
• Description: Dot Check F-ROM ERASE Error (on Version Up)

• Code: 111-01
• Display: E111 NCU ROM 01
• Description: Dot Check F-ROM VERIFY Error (on Version Up)

• Code: 111-02
• Display: E111 NCU ROM 02
• Description: Dot Check F-ROM WRITE Error (on Version Up)

• Code: 114-0
• Display: E114 NCU ROM HASH
• Description: Hash check error (on Version Up)

• Code: 116-0
• Display: **** ERROR 116 **** NCU I/F 00
• Description: Dot Check I/F Error (Sequence Error)

• Code: 116-01
• Display: NCU I/F 01
• Description: Dot Check I/F Error (Communication Error)

• Code: 12-0
• Display: ***** ERROR 12 ***** MAINTENANCE COMMAND
• Description: Error on Command (Maintenance Command)

• Code: 120-0
• Display: **** ERROR 120 **** ENVIRONMENT TEMP(LO)
• Description: Out of Allowable Ambient Temperature Range (Low)

• Code: 121-0
• Display: **** ERROR 121 **** ENVIRONMENT TEMP(HI)
• Description: Out of Allowable Ambient Temperature Range (High)

– Mimaki JV5-160S Error codes and solution steps to solve problems:

• Code: 134-1
• Display: **** ERROR 134 **** MEDIA ENCODER:SENSOR
• Description: Media Encoder Error (Uncountable)

• Code: 134-2
• Display: **** ERROR 134 **** MEDIA ENCODER:DIR.
• Description: Media Encoder Error (Wrong Direction)

• Code: 134-4
• Display: **** ERROR 134 **** MEDIA ENCODER:ORIGIN
• Description: Media Encoder Error (Origin Detection Failure)

• Code: 135-0
• Display: **** ERROR 135 **** MEDIA FEED UNUSUAL
• Description: Error on Media Feed

• Code: 142-0
• Display: **** ERROR 142 **** INK LEAK (–/–)
• Description: Ink Leakage detected bit0:Station (St)

• Code: 143-1
• Display: **** ERROR 143 **** CARTRIDGE SOLENOID
• Description: Ink Cartridge Solenoid Valve Voltage Abnormal

• Code: 143-2
• Display: *** ERROR 143 **** WASH CART. SOLENOID
• Description: Wash Cartridge Solenoid Valve Voltage Abnormal

• Code: 144-0
• Display: **** ERROR 144 **** CARTRIDGE SET !
• Description: Slot without Cartridge Found

• Code: 150-0
• Display: ERROR COMMAND
• Description:

• Code: 151-0
• Display: ERROR PARAMETER
• Description:

• Code: 152-0
• Display: ERROR DATA
• Description:

• Code: 16-0
• Display: ***** ERROR 16 ***** MRL COMMAND
• Description: Wrong Command System

• Code: 160-00
• Display: **** ERROR 160 **** NCU DETECT 00
• Description: NCU Detection Error (Data Error)

• Code: 160-01
• Display: **** ERROR 160 **** NCU DETECT 01
• Description: NCU Detection Error (Parameter Error)

• Code: 160-02
• Display: **** ERROR 160 **** NCU DETECT 02
• Description: NCU Detection Error (FPGA Error)

• Code: 160-03
• Display: **** ERROR 160 **** NCU DETECT 03
• Description: NCU Detection Error (Base Position Not Found)

• Code: 160-04
• Display: **** ERROR 160 **** NCU DETECT 04
• Description: NCU Detection Error (Base Position Detection Failure)

• Code: 161-01
• Display: **** ERROR 161 **** NCU EXCHANGE
• Description: LD Current Close to Threshold

• Code: 161-2
• Display: NCU CONSUMPTION
• Description: LD Current Close to Threshold

• Code: 162-0
• Display: **** ERROR 162 **** NCU LINE VOLTAGE
• Description: Power Voltage Error

• Code: 163-1
• Display: **** ERROR 163 **** NCU SENSOR
• Description: Sensor Level Down

• Code: 163-2
• Display: **** ERROR 163 **** NCU SENSOR DETECT
• Description: Sensor Detection Error

• Code: 164-0
• Display: **** ERROR 164 **** NCU FPGA ERROR
• Description: FPGA Configuration Failed

• Code: 2-0
• Display: ***** ERROR 02 ***** MAIN RAM
• Description: Error on Control RAM

• Code: 20-01
• Display: ***** ERROR 20 ***** I/F BOARD 01
• Description: Error on Communication between I/F Board and Main Board (Time-out)

• Code: 20-02
• Display: I/F BOARD 02
• Description: Error on Communication between I/F Board and Main Board (Data Format Error)

• Code: 20-03
• Display: I/F BOARD 03
• Description: Error on Communication between I/F Board and Main Board (Code Inconsistency)

• Code: 20-04
• Display: I/F BOARD 04
• Description: Error on Communication between I/F Board and Main Board (I/F Command Error)

• Code: 200-0
• Display: **** ERROR 200 **** HEAD MEMORY (—-)
• Description: Head Unit Memory Error

• Code: 201-0
• Display: **** ERROR 201 **** BACKUP MEMORY
• Description: Backup Memory Error

• Code: 202-0
• Display: **** ERROR 202 **** DEVICE CONSTRUCTION
• Description: Device Configuration Incompatible

• Code: 203-0
• Display: **** ERROR203 **** SDRAM SIZE
• Description: SD-RAM Capacity Insufficient

• Code: 21-0
• Display: ***** ERROR 21 ***** I/F NONE
• Description: I/F Board not installed

• Code: 210-0
• Display: **** ERROR 210 **** INTERLOCK SENSOR
• Description: Interlock Cable Short-circuited

• Code: 211-1
• Display: **** ERROR 211 **** HeaterTEMP(–/–/–)
• Description: Media Temperature Abnormal bit0:Pre heater bit1:Print

• Code: 211-2
• Display: **** ERROR 211 **** HeadWARM.TEMP.(—-)
• Description: Head Heater Temperature Abnormal Head No.:bit field

• Code: 212-0
• Display: **** ERROR 212 **** WASTE INKtank SENSOR
• Description: Waste Ink Tank Sensor Error

• Code: 213-0
• Display: **** ERROR 213 **** WASTE INK TANK FULL/ABSENCE
• Description: Waste Ink Tank Full or Absent

• Code: 23-0
• Display: ***** ERROR 23 ***** HOST I/F
• Description: Error on IEEE1394 Communication with Host Computer

• Code: 24-0
• Display: ***** ERROR 24 ***** I/F INITIAL
• Description: Error on I/F Board Initialization

• Code: 25-1
• Display: ***** ERROR 25 ***** FULL-SPEED
• Description: Communication Error (USB Connection with Host with Full-Speed Mode)

• Code: 25-2
• Display: ***** ERROR 25 ***** PACKET SIZE OVER
• Description: Communication Error (USB Drawing Data over 1 packet)

• Code: 25-3
• Display: ***** ERROR 25 ***** USB PROTOCOL
• Description: Communication Error (USB Protocol Error)

• Code: 25-4
• Display: ***** ERROR 25 ***** USB ENVIRONMENT
• Description: Communication Error (Signal Line Error on USB Connection)

• Code: 25-5
• Display: ***** ERROR 25 ***** USB DATA
• Description: Communication Error (Drawing Data Receive Failure)

• Code: 250-0
• Display: **** ERROR 250 **** Y COORDINATES
• Description: Scan Error

• Code: 251-0
• Display: **** ERROR 251 **** SYSTEM ERROR
• Description: System Error

• Code: 3-1
• Display: ***** ERROR 03 ***** POWER +5V
• Description: Error on +5V Power

• Code: 3-2
• Display: POWER +24V
• Description: Error on +24V Power

• Code: 3-4
• Display: POWER +42V
• Description: Error on +42V Power

• Code: 3-5
• Display: POWER +3.3V
• Description: Error on +3.3V Power

• Code: 30-0
• Display: ***** ERROR 30 ***** OPERATION ERROR
• Description: Wrong Operation

• Code: 34-0
• Display: ***** ERROR 34 ***** DATA REMAIN
• Description: Presence of Undrawn Data on Setting Change

• Code: 4-0
• Display: ***** ERROR 04 ***** F-ROM
• Description: Error on Parameter ROM

• Code: 40-0
• Display: ***** ERROR 40 ***** MOTOR ALARM X
• Description: X Motor Overloaded 1: Position Over 3: Position Counter Up

• Code: 41-0
• Display: ***** ERROR 41 ***** MOTOR ALARM Y
• Description: Y Motor Overloaded 2: Position Over 4: Position Counter Up

• Code: 42-0
• Display: ***** ERROR 42 ***** X OVER CURRENT
• Description: X-Motor Over-current 5: X Peak Current Over 7: X Av. Current Over

• Code: 43-0
• Display: ***** ERROR 43 ***** Y OVER CURRENT
• Description: Y Motor Over-current 6: Y Peak Current Over 8: Y Ax. Current Over

• Code: 45-0
• Display: ***** ERROR 45 ***** CAPPING : SENSOR
• Description: Error on Capping Control (Sensor Error)

• Code: 45-1
• Display: ***** ERROR 45 ***** CAPPING : PARAMETER
• Description: Error on Capping Control (Parameter Error)

• Code: 46-0
• Display: ***** ERROR 46 ***** WIPER
• Description: Error on Wiper Control

• Code: 47-0
• Display: ***** ERROR 47 ***** STATION
• Description: Error on Station Control

• Code: 49-0
• Display: ***** ERROR 49 ***** CUTTER SOLENOID
• Description: Error on Cutter Control

• Code: 50-1
• Display: ***** ERROR 50 ***** MEDIA DETECT
• Description: Media Not Found

• Code: 50-2
• Display: ***** ERROR 50 ***** THICKNESS DETECT
• Description: Media Thickness Not Detected

• Code: 51-0
• Display: ***** ERROR 51 ***** Y-ORIGIN
• Description: Y-origin Not Found

• Code: 53-0
• Display: ***** ERROR 53 ***** HEAD HEIGHT ORIGIN
• Description: Head Height Origin Not Found

• Code: 54-0
• Display: ***** ERROR 54 ***** MEDIA JAM
• Description: Media Jam Detected

• Code: 58-3
• Display: ***** ERROR 58 ***** POSITION ENCODER:DIR
• Description: Error on Position Encoder Detection (Wrong Direction)

• Code: 58-4
• Display: ***** ERROR 58 ***** POSITION ENCODER:CNT
• Description: Error on Position Encoder Detection (Count Error)

• Code: 59-3
• Display: ***** ERROR 59 ***** CUTTER ENCODER
• Description: Error on Cutter Encoder Detection (Wrong Direction)

• Code: 6-0
• Display: ***** ERROR 06 ***** SD-RAM
• Description: Error on SD-RAM

• Code: 64-1
• Display: ***** ERROR 64 ***** TAKE-UP VOLTAGE
• Description: Take-up Motor Voltage Abnormal

• Code: 64-2
• Display: ***** ERROR 64 ***** FEEDER VOLTAGE
• Description: Feeder Motor Voltage Abnormal

• Code: 65-2
• Display: ***** ERROR 65 ***** Take-up Encoder
• Description: Error on Take-up Encoder (Uncountable)

• Code: 66-2
• Display: ***** ERROR 66 ***** Feeder Encoder
• Description: Error on Feeder Encoder (Uncountable)

• Code: 7-1
• Display: ***** ERROR 07 ***** HEAD (—-)
• Description: Head No.:bit field Abnormal Temperature Detected

• Code: 7-2
• Display: VOLTAGE (—-)
• Description: Head No.:bit Abnormal Voltage Detected

• Code: 70-0
• Display: E70 FPGA
• Description: FPGA Configuration Failed

• Code: 71-0
• Display: E71 SD-RAM
• Description: Error on SD-RAM

• Code: 74-0
• Display: E74 TRANS DATA
• Description: Received Data Other Than Version Up File

• Code: 75-0
• Display: E75 I/F NONE
• Description: I/F Board not installed

• Code: 76-0
• Display: E76 I/F INITIAL
• Description: Error on I/F Board

• Code: 77-0
• Display: E77 I/F BOARD
• Description: Error on Communication between Main Board and Time-out in Communication between Main Board

• Code: 78-0
• Display: E78 HOST I/F
• Description: Error on Communication between Main Board and Time-out in Communication between Main Board

• Code: 8-2
• Display: ***** ERROR 08 *****
• Description: Error on Linear Encoder (Uncountable)

• Code: 8-3
• Display: LinearENCODER:DIR.
• Description: Error on Linear Encoder (Wrong Direction)

• Code: 8-4
• Display: LinearENCODER:COUNT
• Description: Error on Linear Encoder (Count Failure)

• Code: 80-0
• Display: E80 ROM0 ERASE
• Description: ROM0 Erase error

• Code: 81-0
• Display: E81 ROM1 ERASE
• Description: ROM1 Erase error

• Code: 82-0
• Display: E82 h’********
• Description: ROM0 Write error

• Code: 83-0
• Display: E83 h’********
• Description: ROM1 Write error

• Code: 84-0
• Display: E84 h’********
• Description: Verify error

• Code: 85-0
• Display: E85 ROM HASH
• Description: Hash check error

• Code: 9-1
• Display: ***** ERROR 09 ***** FPGA ERROR
• Description: Error on Control IC

• Code: 9-2
• Display: HDC ERROR (—-)
• Description: HDC No. Error on Control IC

• Code: 90-0
• Display: E90 h’********
• Description: ROM Erase error

• Code: 92-0
• Display: E92 h’********
• Description: ROM Write error

• Code: 95-0
• Display: E95 MODE SHIFT
• Description: Shift to Version Up Mode Failed

• Code: 98-0
• Display: E98 I/F FORMAT
• Description: Error on Version Up Data

• Code: 99-0
• Display: E99 VERSION DATA
• Description: Wrong Version

Waste Ink Pad Counter Utility Functions:

– Cleaning printhead.
– Ink charge.
– Fix Epson red lights blinking Error

– Fix Epson Service Required Error: A printer’s ink pad at the end of its service life Please contact Epson Support.

– Check the current value of waste ink counters and ink level counters.
– Clear Waste Ink Counters.
– Read and write serial number.
– Read and write USB ID.
– Read and write HEAD ID.
– Make EEPROM dump, backup.
– Paper feed test.
– Nozzle check.
– Color check pattern.
– Initialize (disable) PF deterioration offset.
– Retrieve device information

Contact us to get support with Mimaki JV5-160S Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/