Fixing Kyocera FS5900C Printer Error Codes in details
– Printer model: Kyocera FS5900C
– Fix Error codes on Kyocera FS5900C model and its description:
- Code: A2
- Description: Fuser temperature is over 210 °C.
Fuser temperature does not reach 100 °C within 200sec,160 °C within 500sec during warming up, or it is less than 120 °C during standby, and it does not return to set temperature within 100sec after a low temperature error occurred during printing. - Causes: High temperature error Temperature rising error error
- Code: A5
- Description: 1. Main charger Arc discharge of contact has occurred. 2. DEV,FTR,STR bias Short circuit of contact voltage has occurred.
- Causes: Charger error
- Code: A6
- Description: Fuser/Toner Cartridge fan is not rotating at normal speed.
- Causes: Fuser/Toner Cartridge fan error
- Code: A7
- Description: Power supply fan is not rotating at normal speed.
- Causes: Power supply fan error
- Code: A8
- Description: Ozone fan is not rotating at normal speed.
- Causes: Ozone fan error
- Code: A9
- Description: Multi-Purpose Pickup Roller movement error occurred
- Causes: Multi-Purpose Pickup Roller movement error
- Code: AA
- Description: Toner Cartridge Drive motor (sleeve motor) is not phase-locked and is not rotating at normal speed.
- Causes: Toner Cartridge Drive motor (sleeve motor) unlocked
- Code: AB
- Description: Paper feed motor is not phase-locked and is not rotating at normal speed.
- Causes: Paper feed motor unlocked error
- Code: AC
- Description: OPC home and IT home are not synchronous.
- Causes: OPC asynchronous with intermediate transfer unit
- Code: AD
- Description: OPC home is not detected within 4.5 sec. during rotation of main motor.
- Causes: Position error of the OPC unit
- Code: AE
- Description: IT home is not detected within 0.7 sec. during rotation of main motor.
- Causes: Position error of the intermediate transfer unit
- Code: AF
- Description: The cleaning blade did not reached to non-cleaning position or cleaning position within 0.7 sec.
- Causes: Cleaning blade movement erroror
- Code: B7
- Description: The media transfer roller did not reach to transfer position or home position within 0.9 sec.
- Causes: Media transfer roller movement error
- Code: B8
- Description: The dev. unit did not reach contact position or home position within 1 sec.
- Causes: Cyan developing unit movement error
- Code: B9
- Description: The dev. unit did not reach contact position or home position within 1 sec.
- Causes: Magenta developing unit movement error
- Code: BA
- Description: The dev. unit did not reach contact position or home position within 1 sec.
- Causes: Yellow developing unit movement error
- Code: BB
- Description: The dev. unit did not reach contact position or home position within 1 sec.
- Causes: Black developing unit movement error
- Code: BC
- Description: Engine SRAM check error erroror
- Causes: Engine SRAM check error erroror
- Code: BD
- Description: Engine EEPROM check error. Printing is continued.
- Causes: Engine EEPROM check error
- Code: BE
- Description: EEPROM (Imaging unit) check error
- Causes: EEPROM (Imaging unit) Errororor
- Code: BF
- Description: EEPROM (Fuser unit) check error
- Causes: EEPROM (Fuser unit) Error error
- Code: DE
- Description: Imaging Unit type mismatch
- Causes: Imaging Unit being used is not intended for use with the printer.
- Code: DF
- Description: Fuser Unit type mismatchr error
- Causes: Fuser Unit being used is not intended for use with the printer.
- Code: E0
- Description: Parity error occurs or no response comes back from engine.
- Causes: Engine communication Error
– Kyocera FS5900C printer Error Codes and quick guide to troubleshooting:
- Code: E1
- Description: Main motor is not phase-locked and is not rotating at normal speed.
- Causes: Main motor unlockedmatchr error
- Code: E2, E3
- Description: Laser Scanner motor is not phase-locked and is not rotating at normal speed L-Sync signal is not detected after APC (Auto Power Control). Irregular L-Sync signal is detected.
- Causes: Laser scanner motor unlocked L-Sync over L-Sync short
- Code: E4
- Description: Fuser thermistor is disconnected.
- Causes: Thermistor open error
- Code: E6
- Description: Engine Program ROM checksum error
- Causes: Engine Program ROM checksum error
- Code: F0
- Description: Controller Board system Lock error
- Causes: System does not lock because of failure on communication with the printer panel.
- Code: F1
- Description: Controller checksum Error
- Causes: Checksum failed on Controller ROM.
- Code: F2
- Description: RAM Read/Write Error
- Causes: Checksum has failed on Controller RAM.
- Code: F3
- Description: System Error
- Causes: General controller failure.
- Code: F7
- Description: Option Font ROM checksum error
- Causes: Checksum has failed on option font ROM.
– Buy WIC Reset key on my online store: https://shop.nguyendangnam.com/product/epson-sc-s70670-wic-reset-utility-tool/
– Free Download Epson in specific model: https://dnasofts.com/download-epson-ex-800-driver-firmware-and-manuals/
Source:
https://dnasofts.com
https://shop.nguyendangnam.com/
https://nguyendangnam.me/
https://chiplessprinter.com/reset-epson-waste-ink-pad-counter.html
Contact us to get support with Kyocera FS5900C Error case
Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
