Epson Stylus TX235 list error codes with quick guides

Epson Stylus TX235 list error codes with quick guides

– Compatible Printer model: Epson Stylus TX235
– Epson Stylus TX235 Error Codes with quick guides:

• Code: 01H
• Description: CR PID excess load error
• Causes: • CR Motor failure • CR Unit drive mechanism overload (paper jam, foreign object, insufficient grease, deformation of the Main Frame) • Some part may be detached. (Paper Guide Upper Assy, Cap Assy) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Cable disconnection • Main Board failure (Motor driver failure)

• Code: 02H
• Description: CR PID excess speed error
• Causes: • CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Main Board failure (Motor driver failure)

• Code: 03H
• Description: CR PID reverse error
• Causes: • CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Some external force is applied to the printer such as stopping the CR Unit during printer operation, vibration or the like. • Tooth skip of the CR Timing Belt • Paper jam • Main Board failure (Motor driver failure)

• Code: 04H
• Description: CR PID lock error
• Causes: • CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • CR Motor failure • CR Unit drive mechanism overload (paper jam, foreign object, insufficient grease, deformation of the Main Frame) • Some part may be detached. (Paper Guide Upper Assy, Cap Assy) • Cable disconnection • Main Board failure (Motor driver failure)

• Code: 08H
• Description: CR load position reverse error
• Causes: • CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Main Board failure (Motor driver failure)

• Code: 09H
• Description: CR load position excess speed error
• Causes: • CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Paper jam • Main Board failure (Motor driver failure)

• Code: 0AH
• Description: CR load position excess load error
• Causes: • CR Motor failure • CR Unit drive mechanism overload (paper jam, foreign object, Change Lever failure) • Cable disconnection • Main Board failure (Motor driver failure)

• Code: 10H
• Description: Home position detection error
• Causes: • CIS Module failure • Scanner Housing Upper failure (home seek pattern is dirty) • Scanner Housing Lower failure (the rack section is damaged) • Scanner Motor failure • Insufficient grease • Foreign object • FFC disconnection/failure • Main Board failure

• Code: 20H
• Description: LED lightning error
• Causes: • CIS Module failure • Foreign object • Scanner Housing Upper failure (white standard pattern is dirty) • Main Board failure

• Code: 40H
• Description: Transistor temperature error
• Causes: • Main Board failure

• Code: 41H
• Description: X-Hot detect error (pre printing)
• Causes: • Printhead failure • Main Board failure

• Code: 42H
• Description: X-Hot detect error (after flushing)
• Causes: • Printhead failure • Main Board failure

• Code: 43H
• Description: Head temperature error
• Causes: • Printhead failure • Main Board failure

• Code: 50H
• Description: Home position error
• Causes: • Foreign object • Deformation of the Main Frame • Change Lever failure • Paper jam

• Code: 56H
• Description: Contact error at ink replacement timing (Power-off)
• Causes: • Foreign object • Ink Cartridges are not installed correctly • Paper jam

• Code: 5BH
• Description: Insoluble paper jam error
• Causes: • Foreign object • Deformation of the Main Frame • Change Lever failure • Paper jam

• Code: 80H
• Description: Circuit error (include blowout of a fuse)
• Causes: • Main Board failure

• Code: B0H … CFH
• Description: Ink device error
• Causes: • Ink Cartridge failure • Holder Board Assy failure (CSIC Terminal failure/CR Contact Module failure) • Main Board failure

• Code: D1H
• Description: CR (PID) driving time error
• Causes: • Main Board failure (Firmware failure)

• Code: D2H
• Description: CR (load position) driving time error
• Causes: • Change Lever failure • CR Motor failure • Main Board failure (Motor driver failure)

• Code: D3H
• Description: PF (PID) driving time error
• Causes: • Main Board failure (Firmware failure)

• Code: D4H
• Description: PF (BS) driving time error
• Causes: • Change Lever failure • CR Motor failure • Main Board failure (Motor driver failure)

• Code: F1H
• Description: PF PID excess load error
• Causes: • PF Motor failure • PF drive mechanism overload (paper jam, foreign object, insufficient grease, deformation of the Main Frame) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt • Cable disconnection • Main Board failure (Motor driver failure)

• Code: F2H
• Description: PF PID excess speed error
• Causes: • PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt • Main Board failure (Motor driver failure)

• Code: F3H
• Description: PF PID reverse error
• Causes: • PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt • Paper jam • Paper is pulled out from the ASF side when paper is fed • Main Board failure (Motor driver failure)

• Code: F4H
• Description: PF PID lock error
• Causes: • PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • PF Motor failure • PF drive mechanism overload (paper jam, foreign object, insufficient grease, deformation of the Main Frame) • Cable disconnection • Main Board failure (Motor driver failure)

• Code: F8H
• Description: PF load position reverse error
• Causes: • PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt

• Code: F9H
• Description: PF load position excess speed error
• Causes: • PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt • Main Board failure (Motor driver failure)

• Code: FAH
• Description: PF load position excess load error
• Causes: • PF Motor failure • PF drive mechanism overload (paper jam, foreign object) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt • Cable disconnection

• Code: FCH
• Description: PF load position error
• Causes: • PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • PF Motor failure • PF drive mechanism overload (paper jam, foreign object) • Cable disconnection

Solve Epson Stylus TX235 Error codes

– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here

– Get more information about Epson XP 15000 troubleshooting, click here
– Shop on my shop, click here

Contact us to get support with Epson Stylus TX235 Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.