Epson Stylus Pro 11880C list error codes with quick guides

Epson Stylus Pro 11880C list error codes with quick guides

– Compatible Printer model: Epson Stylus Pro 11880C
– Epson Stylus Pro 11880C Error Codes with quick guides:

• Code: 1101
• Description: Life end of the Ink Tube
  The number of Carriage movement cycles reached the specified upper limit.
• Troubleshooting Guides: Replace the ink tube and CR Motor, and clear the counter using the Adjustment Program.

• Code: 1125
• Description: Carriage home position detection error
  The printer cannot detect the Carriage home position
• Troubleshooting Guides: Check the connection of the CR HP Sensor. Check the installing position of the CR HP Sensor. Replace the HP Sensor. Check if the carriage lock functions.

• Code: 1133
• Description: The CR Motor in position time-out error
  The CR Motor cannot be driven normally. (the carriage movement is not finished.)
• Troubleshooting Guides: Clean the CR Scale. Replace the CR Motor. Replace the CR HP Sensor.

• Code: 1135
• Description: CR Encoder check error
  The CR Encoder signals have a defect.
• Troubleshooting Guides: Check the connection of the CR HP Sensor. Check the connection of the CR Motor. Replace the CR Motor.

• Code: 1136
• Description: CR Motor Step-out error
  CR Motor is out of step.
• Troubleshooting Guides: Clean the CR Scale. Replace the CR Motor. Check the connection of the CR HP Sensor. Check the installing position of the CR HP Sensor.

• Code: 1137
• Description: CR servo parameter error
  The Carriage Unit is overloaded abnormally.
• Troubleshooting Guides: Check if there is any foreign material at the driven section of the Carriage Unit. Replace the CR Motor.

• Code: 1223
• Description: PF Encoder check error
  The PF Encoder signals have a defect.
• Troubleshooting Guides: Check the connection of the PF Encoder. Check the connection of the PF Motor. Replace the PF Motor.

• Code: 1225
• Description: The PF Motor in position time-out error
  The PF Motor cannot be driven normally. (the carriage movement is not finished.)
• Troubleshooting Guides: Clean the PF Scale. Replace the PF Motor. Replace the PF Scale.

• Code: 1227
• Description: PF Motor Step-out error
  PF Motor is out of step.
• Troubleshooting Guides: Clean the PF Scale. Replace the PF Motor. Check the connection of the PF Encoder. Check the installing position of the PF Encoder. Replace the PF Encoder.

• Code: 1228
• Description: PF servo parameter error
  The PF Motor is overloaded abnormally.
• Troubleshooting Guides: Check if there is any foreign material at the driven section of the PF Motor. Replace the PF Motor.

• Code: 131B
• Description: Head driver (transmission gate) overheat error
  The temperature of the Head Driver rises, and reaches the specified level.
• Troubleshooting Guides: Check the connection of the Head FFC, and if there is abnormality (slant connection or the like), correct it. Replace the Printhead.

• Code: 1400
• Description: Pressure failure error
  The Pressure Sensor does not react even the pressurizing continues for the specified period of time.
• Troubleshooting Guides: Check the connection of the Pressure Pump Unit. Check the connection of the Pressure Tubes. Replace the Pressure Pump Unit (Pressure Motor, Pressure Sensor).

• Code: 1410
• Description: Pump motor drive timeover error
  The motor driving does not end even after the specified period of time has passed.
• Troubleshooting Guides: Install the latest firmware. Replace the Main Board Assy.

• Code: 1430
• Description: Cartridge Holder Maintenance
  The life of the waste ink pad for the leakage of the Ink Cartridge replacement has reached its limit. (the life is controlled by counting the times of replacing the cartridges.)
• Troubleshooting Guides: Replace the Ink Cartridge Holder and clear the counter using the Adjustment Program.

• Code: 1434
• Description: Ink cover unlock error
  The Ink Cover cannot be opened.
• Troubleshooting Guides: If there is an obstacle in front of the cover, remove it. Check if the Ink Cover is installed properly. Check the solenoid that locks the Ink Cover and the sensor that detects the open/closed status of the Ink Cover.

• Code: 1435
• Description: Cap HP detection error
  The home position of the Cap Unit cannot be detected.
• Troubleshooting Guides: Check the connection of the Ink System Unit. Replace the Ink System Unit.

• Code: 1436
• Description: Select valve HP detection error
  The home position of the Pump Unit cannot be detected.
• Troubleshooting Guides: Check the connection of the Ink System Unit. Replace the Ink System Unit.

• Code: 1437
• Description: Cap motor drive timeover error
  The motor driving does not end even after the specified period of time has passed.
• Troubleshooting Guides: Install the latest firmware. Replace the Main Board Assy.

• Code: 1441
• Description: Pressure motor 1 acceleration error
  The revolution of the Pressure Motor does not reach the specified speed within the specified period of time.
• Troubleshooting Guides: Replace the Pressure Pump Unit.

• Code: 1442
• Description: Pressure motor 2 acceleration error
  The revolution of the Pressure Motor does not reach the specified speed within the specified period of time.
• Troubleshooting Guides: Replace the Pressure Pump Unit.

• Code: 1443
• Description: Pressure motor 3 acceleration error
  The revolution of the Pressure Motor does not reach the specified speed within the specified period of time.
• Troubleshooting Guides: Replace the Pressure Pump Unit.

• Code: 1461
• Description: Pressure motor 1 lock error
  The revolving speed of the Pressure Motor has decreased.
• Troubleshooting Guides: Replace the Pressure Pump Unit.

• Code: 1462
• Description: Pressure motor 2 lock error
  The revolving speed of the Pressure Motor has decreased.
• Troubleshooting Guides: Replace the Pressure Pump Unit.

• Code: 1463
• Description: Pressure motor 3 lock error
  The revolving speed of the Pressure Motor has decreased.
• Troubleshooting Guides: Replace the Pressure Pump Unit.

• Code: 1471
• Description: Pressure motor 1 reverse detection error
  Abnormality of the revolution of the Pressure Motor has been detected.
• Troubleshooting Guides: Replace the Pressure Pump Unit.

• Code: 1472
• Description: Pressure motor 2 reverse detection error
  Abnormality of the revolution of the Pressure Motor has been detected.
• Troubleshooting Guides: Replace the Pressure Pump Unit.

• Code: 1473
• Description: Pressure motor 3 reverse detection error
  Abnormality of the revolution of the Pressure Motor has been detected.
• Troubleshooting Guides: Replace the Pressure Pump Unit.

• Code: 150C
• Description: PG HP detection error
  The home position of the platen gap cannot be detected.
• Troubleshooting Guides: Check the connection of the PG Sensor. Replace the PG Sensor. Replace the PG Sensor.

• Code: 1511
• Description: APG motor drive timeover error
  The motor driving does not end even after the specified period of time has passed.
• Troubleshooting Guides: Install the latest firmware. Replace the Main Board Assy.

• Code: 1536
• Description: Pressurizing reset failure
  The pressurizing cannot be reset. The Pressure Sensor remains on, even after the pressurizing has been reset.
• Troubleshooting Guides: Replace the Pressure Pump Unit.

• Code: 16A0
• Description: Cap unit status error 1
  The position of the Cap Unit is wrong.
• Troubleshooting Guides: Replace the Ink System Unit (Cap Unit HP Sensor). Replace the Ink System Motor.

• Code: 16A1
• Description: Cap unit status error 2
  The position of the Cap Unit is wrong.
• Troubleshooting Guides: Replace the Ink System Unit (Cap Unit HP Sensor). Replace the Ink System Motor.

• Code: 16B0
• Description: Cap HP detection retry error
  The Cap Unit HP sensor does not work normally.
• Troubleshooting Guides: Replace the Ink System Unit (Cap Unit HP Sensor).

• Code: 1700
• Description: Print position error
  The correct print position cannot be detected.
• Troubleshooting Guides: Clean the CR Scale. Clean the CR Encoder. Replace the CR Scale. Replace the CR Encoder Sensor. Install the latest firmware.

• Code: 1800
• Description: AID voltage error
  Due to the leak of AID current, the specified voltage cannot be achieved.
• Troubleshooting Guides: Clean the Flushing Box. (There’s a possibility of leaking through dust or accumulating ink) Replace the AID Board (BOARD ASSY.,HEAD).

• Code: 1A23
• Description: RTC analysis error
  The value information on various absolute time stored on NVRAM is abnormal.
• Troubleshooting Guides: Check if the lithium battery is installed properly. Replace the Main Board Assy.

• Code: 1A26
• Description: RTC communication error
  The RTC circuit on the Main Board Assy malfunctions.
• Troubleshooting Guides: Turn the power Off and remove the lithium battery. After a several seconds, reattach the battery and turn the power back On. If the printer recovers from the error, reset the RTC using the Adjustment Program and set the correct date and time

• Code: 1A37
• Description: Head thermistor error
  There is a defective connection of the Head FFC. The Head Thermistor detects a temperature out of the specification. The Head Thermistor has a defect.
• Troubleshooting Guides: Check the connection of the Head FFC, and if there is abnormality (slant connection, disconnection or the like). Replace the Printhead.

• Code: 1A38
• Description: Transistor thermistor error
  The transistor has a defect. The thermistor detects a temperature out of the specification.
• Troubleshooting Guides: Replace the Printhead.

• Code: 1A39
• Description: Head error
  The active signal of Head error has been detected.
• Troubleshooting Guides: Replace the Printhead.

• Code: 1A40
• Description: Main board IC2 error
  The destination is wrong.
• Troubleshooting Guides: Configure the destination again.

• Code: 1A41
• Description: Head rank ID input error
  The information of the Head rank ID is wrong.
• Troubleshooting Guides: Configure the Head rank ID again.

Solve Epson Stylus Pro 11880C Error codes

• Code: 2000
• Description: NVRAM error
  NVRAM erase or write error has occurred.
• Troubleshooting Guides: Replace the Main Board Assy.

• Code: 2002
• Description: SDRAM error
  SDRAM read/write error has occurred.
• Troubleshooting Guides: Replace the Main Board Assy.

• Code: 2003
• Description: BOOT program sum error
  Installation of the firmware has been failed. The Flash ROM has a defect.
• Troubleshooting Guides: Install the firmware again. Replace the Main Board Assy.

• Code: 200A
• Description: Program loading error
  The SDRAM has a defect. The program cannot be loaded on the SDRAM.
• Troubleshooting Guides: Replace the Main Board Assy.

• Code: 200B
• Description: Internal insufficient memory error
  The firmware has a defect.
• Troubleshooting Guides: Install the correct firmware.

• Code: 200C
• Description: Servo interrupt watchdog time-out error
  The servo cannot be controlled.
• Troubleshooting Guides: Install the correct firmware. Replace the Main Board Assy.

• Code: 200D
• Description: System interrupt watchdog time-out error
  A system failure such as CPU failure, defective cash or the like has occurred.
• Troubleshooting Guides: Replace the Main Board Assy.

• Code: 200E
• Description: Unknown NMI
  The CPU has detected an unknown NMI.
• Troubleshooting Guides: Replace the Main Board Assy.

• Code: 3000
• Description: AC power shut-off
  The AC power has been shut off due to a power failure, unplugged, power supply board failure, or main board failure or the like.
• Troubleshooting Guides: Check the connection of the AC cable, and if there is a defect, correct it. Replace the Power Supply Board Assy. Replace the Main Board Assy.

• Code: FXXX
• Description: CPU-related error
  The firmware has a defect. The Main Board Assy is broken.
• Troubleshooting Guides: Install the correct firmware. Replace the Main Board Assy.

– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here

– Get more information about Epson XP 15000 troubleshooting, click here
– Shop on my shop, click here

Contact us to get support with Epson Stylus Pro 11880C Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.