Epson SC-F2180 list error codes with quick guides

Epson SC-F2180 list error codes with quick guides

– Compatible Printer model: Epson SC-F2180
– Epson SC-F2180 Error Codes with quick guides:

• Code: 1101
• Description: Ink Tube End Of Life Error
• Causes: The Carriage has made enough passes to wear out the Ink Tubes.
• Troubleshooting Guides: Inspect and replace the Ink Tubes if necessary, and reset the counter (CR Motor Counter)

• Code: 1125
• Description: Carriage Home Position Detection Error
• Causes: The Carriage Home Position Sensor does not detect the Carriage properly.
• Troubleshooting Guides: 1. Check the Carriage Home Position Sensor.
  2. Check for mechanical issues that would restrict the Carriage Mechanism from going “home”.

• Code: 1138
• Description: CR Over Current Error
• Causes: The Carriage Motor Driver Circuit detects abnormal current draw.
• Troubleshooting Guides: 1. Check for proper Carriage movement (defective Carriage Bearings, etc.).
  2. Check for proper Carriage Belt Tension.
  3. Check the Carriage Motor.

• Code: 113A
• Description: CR Over Current Error
• Causes: The Carriage Motor Driver Circuit detects abnormal current draw.
• Troubleshooting Guides: 1. Check for proper Carriage movement (defective Carriage Bearings, etc.).
  2. Check for proper Carriage Belt Tension.
  3. Check the Carriage Motor.

• Code: 113B
• Description: Carriage Over Speed Error
• Causes: The Carriage Encoder signal does not look right to the Main Board.
• Troubleshooting Guides: 1. Check the CR Encoder Strip.
  2. Check the CR Encoder.
  3. Check the Carriage Motor.

• Code: 113C
• Description: Carriage Encoder Reversing Error
• Causes: The Carriage Encoder reports that the Carriage is moving in the wrong direction.
• Troubleshooting Guides: 1. Check the CR Encoder.
  2. Check the Main Board.

• Code: 113D
• Description: Carriage Encoder Movement Error
• Causes: The Carriage Encoder
  reports that the Carriage is
  not moving or moving slow.
• Troubleshooting Guides: 1. Check the CR Encoder.
  2. Check the CR Encoder Strip.
  3. Check the Main Board.

• Code: 113E
• Description: Carriage Encoder Velocity Error
• Causes: The Carriage Encoder reports that the Carriage is moving at an irregular speed.
• Troubleshooting Guides: 1. Check the CR Encoder Strip.
  2. Check the CR Encoder.
  3. Check the Carriage Motor.
  4. Check the Main Board.

• Code: 113F
• Description: Carriage Encoder Velocity Error
• Causes: The Carriage Encoder reports that the Carriage is moving at an irregular speed.
• Troubleshooting Guides: 1. Check Carriage Movement.
  2. Check the CR Encoder Strip.
  3. Check the CR Encoder.
  4. Check the Carriage Motor.
  5. Check the Main Board.

• Code: 1228
• Description: TF Motor Overcurrent Error
• Causes: The TF Motor Driver has an overcurrent condition.
• Troubleshooting Guides: 1. Check the TF Motor for binding
  2. Replace the TF Encoder Board.
  3. Replace the TF Motor.

• Code: 122A
• Description: Table Feed Motor Overload Error
• Causes: The Table Feed Motor Driver Circuit detects abnormal current draw.
• Troubleshooting Guides: 1. Check for proper Table (look for binding).
  2. Check for proper Table Feed Belt Tension.
  3. Check the Table Feed Encoder.
  4. Check the Table Feed Encoder Disk.
  5. Check the Table Feed Motor

• Code: 122B
• Description: Table Feed Motor Speed Error
• Causes: Speed Error during Deceleration
• Troubleshooting Guides: 1. Check the Table Feed Encoder.
  2. Check the SUB Board
  3. Check the Main Board

• Code: 122C
• Description: Table Feed Motor Reversing Error
• Causes: Speed Error during Reversing direction.
• Troubleshooting Guides: 1. Check PF Timing Belt Tension.
  2. Check PF Encoder.
  3. Check Table Feed Motor.

• Code: 122D
• Description: Table Feed Motor Time Out Error
• Causes: The Table Feed Encoder reports that the Table does not move properly.
• Troubleshooting Guides: 1. Check for proper Table movement.
  2. Check for proper Table Feed Belt tension.
  3. Check the Table Feed Encoder.
  4. Check the Table Feed Encoder Disk.
  5. Check the Table Feed Motor

• Code: 122E
• Description: Table Feed Motor Velocity error.
• Causes: The Table Feed Encoder reports that the Table Feed Roller is moving at and irregular speed.
• Troubleshooting Guides: 1. Check for proper Table Feed Belt Tension.
  2. Check the Table Feed Encoder.
  3. Check the Table Feed Encoder Disk.
  4. Check the Table Feed Motor

• Code: 122F
• Description: Table Feed Motor Velocity error.
• Causes: The Table Feed Encoder reports that the Table is moving at and irregular speed.
• Troubleshooting Guides: 1. Check for proper Table Feed Belt Tension.
  2. Check the Table Feed Encoder.
  3. Check the Table Feed Encoder Disk.
  4. Check the Table Feed Motor

• Code: 131B
• Description: Print Head Temperature Error
• Causes: The Thermistor in the Print Head reports an over temperature condition
• Troubleshooting Guides: 1. Re-seat the Print Head Cables on the Main Board side.
  2. Re-seat the Print Head Cables on the Print Head side.
  3. Replace the Print Head.
  4. Replace the Main Board.

• Code: 1410
• Description: Maintenance Unit Error
• Causes: Check Maintenance Unit Operation
• Troubleshooting Guides: 1. Replace Pump Cap assembly.

• Code: 1412
• Description: Cloth Wiper error.
• Causes: Cloth Wiper undetermined error.
• Troubleshooting Guides: 1. Check the Cloth Wiper Unit.
  2. Re-Seat the Cloth Wiper Unit.
  3. Replace the Cloth Wiper Unit.

• Code: 141A
• Description: Pump Motor Over Current Error
• Causes: The Cleaning Pump Motor draws too much current
• Troubleshooting Guides: 1. Check the Pump Cap Unit operation.
  2. Replace the Pump Cap Unit.

• Code: 141B
• Description: Pump Motor Over Speed Error
• Causes: The Cleaning Pump Motor spins too fast.
• Troubleshooting Guides: 1. Check the Pump Cap Unit operation.
  2. Replace the Pump Cap Unit.

• Code: 141C
• Description: Rotation Direction Error
• Causes: The Cleaning Pump Motor spins in the wrong direction.
• Troubleshooting Guides: 1. Check the Pump Cap Unit operation.
  2. Replace the Pump Cap Unit.

• Code: 141D
• Description: Driving Time Out Error
• Causes: The Cleaning Pump Motor does not spin, or spins too long.
• Troubleshooting Guides: 1. Check the Pump Cap Unit operation.
  2. Replace the Pump Cap Unit.

• Code: 141E
• Description: Velocity Deviation Error
• Causes: The Cleaning Pump Motor spins at irregular speeds.
• Troubleshooting Guides: 1. Check the Pump Cap Unit operation.
  2. Replace the Pump Cap Unit.

• Code: 141F
• Description: Under Speed Error
• Causes: The Cleaning Pump Motor spins too slow.
• Troubleshooting Guides: 1. Check the Pump Cap Unit operation.
  2. Replace the Pump Cap Unit.

• Code: 1429
• Description: Circulation Motor Error
• Causes: Circulation Motor or driver error.
• Troubleshooting Guides: 1. Replace Circulation Motor.
  2. Replace Main Board.

• Code: 142A
• Description: Circulation Motor Over Current
• Causes: Circulation Motor Over Current
• Troubleshooting Guides: 1. Inspect the circulation motor assembly for binding.
  2. Check the circulation encoder.
  3. Replace the circulation motor and encoder assembly.

• Code: 142B
• Description: Circulation Motor Over Speed
• Causes: Circulation Motor Over Speed
• Troubleshooting Guides: 1. Inspect the circulation motor assembly and encoder.
  2. Check the circulation encoder.
  3. Replace the circulation motor and encoder
  assembly.

• Code: 142C
• Description: Circulation Motor reverse current
• Causes: Circulation Motor Over current in reverse direction
• Troubleshooting Guides: 1. Inspect the circulation motor assembly and encoder.
  2. Check the circulation encoder.
  3. Replace the circulation motor and encoder
  assembly.

• Code: 142D
• Description: Circulation Motor drive current
• Causes: Circulation Motor drive current in reverse direction
• Troubleshooting Guides: 1. Inspect the circulation motor assembly and encoder.
  2. Check the circulation encoder.
  3. Replace the circulation motor and encoder assembly.
  4. Replace the Main Board

• Code: 142E
• Description: Circulation Motor drive speed
• Causes: Circulation Motor drive speed error
• Troubleshooting Guides: 1. Inspect the circulation motor assembly and encoder.
  2. Check the circulation encoder.
  3. Replace the circulation motor and encoder assembly.
  4. Replace the Main Board

• Code: 142F
• Description: Circulation Motor drive speed too slow
• Causes: Circulation Motor drive speed too low error
• Troubleshooting Guides: 1. Inspect the circulation motor assembly and encoder.
  2. Check the circulation encoder.
  3. Replace the circulation motor and encoder assembly.
  4. Replace the Main Board

• Code: 1431
• Description: Pump Cap End Of Life
• Causes: Pump Cap End of Life
• Troubleshooting Guides: 1. Check the Pump Cap Unit operation.
  2. Replace the Pump Cap Unit.

• Code: 1432
• Description: Right Ink Holder End of Life
• Causes: Right Ink Holder End of Life
• Troubleshooting Guides: 1. Replace Right Ink Holder

• Code: 1433
• Description: Left Ink Holder End of Life
• Causes: Left Ink Holder End of Life
• Troubleshooting Guides: 1. Replace Left Ink Holder

• Code: 1435
• Description: Buffer Assembly End Of Life
• Causes: Buffer Assembly End Of Life
• Troubleshooting Guides: 1. Replace the Buffer Assembly.

• Code: 1436
• Description: Circulation Pump End of Life
• Causes: Circulation Pump End of Life
• Troubleshooting Guides: 1. Replace the Circulation Pump.

• Code: 1459
• Description: CWIP (Cloth Wiper) Oscillation Error
• Causes:
• Troubleshooting Guides: 1. Re-Seat the Cloth Wiper unit
  2. Replace the Cloth Wiper unit.

• Code: 145A
• Description: CWIP (Cloth Wiper) Overload Error
• Causes: Is the wiper expended, can it be wound easily, is it seated properly.
• Troubleshooting Guides: 1. Check for proper installation.
  2. Check for binding.
  3. Replace the Wiper Unit.

• Code: 145B
• Description: CWIP (Cloth Wiper) Over Speed Error
• Causes: Encoder damaged, Encoder Cable
• Troubleshooting Guides: 1. Replace the relay cable
  2. Replace the Wiper Unit

• Code: 145C
• Description: CWIP (Cloth Wiper) Reversing Error
• Causes: Encoder damaged, Encoder Cable
• Troubleshooting Guides: 1. Replace the relay cable 2. Replace the Wiper Unit

• Code: 145D
• Description: CWIP (Cloth Wiper) Drive Time-out Error
• Causes:
• Troubleshooting Guides: 1. Replace Main Board

Solve Epson SC-F2180 Error codes

• Code: 145E
• Description: CWIP (Cloth Wiper) velocity Error
• Causes:
• Troubleshooting Guides: 1. Check Encoder
  2. Check Encoder Cable.
  3. Check Motor Cable
  4. Replace Motor
  5. Replace Wiper Unit.

• Code: 145F
• Description: CWIP (Cloth Wiper) Bound Up Error
• Causes:
• Troubleshooting Guides: 1. Check Encoder
  2. Check Encoder Cable.
  3. Check Motor Cable
  4. Replace Motor
  5. Replace Wiper Unit

• Code: 1503
• Description: Table position error
• Causes: Table Front or Rear sensor not detected.
• Troubleshooting Guides: 1.Check Table Front sensor.
  2. Check Table Rear sensor.
  3. Replace defective sensor.

• Code: 1504
• Description: Table Stuck Error
• Causes: Table is not moving
• Troubleshooting Guides: 1. Check for obstruction of Table
  2. Check Table Belt and tension.

• Code: 1505
• Description: Obstacle Sensor Error
• Causes: Obstacle sensor detected an obstruction in the carriage path.
• Troubleshooting Guides: 1. Check Obstacle sensor operation.
  2. Remove obstruction in carriage path.
  3. Lower the table height.
  4. Replace the Obstacle sensor.

• Code: 1620
• Description: Pressure Motor Error
• Causes: Pressure Motor Initialization Error.
• Troubleshooting Guides: 1. Check IC Holder connections.
  2. Replace Left Ink Holder.
  3. Replace Right Ink Holder.

• Code: 1621
• Description: Pressure Motor Position Error
• Causes: Pressure Motor Position Sensor Error
• Troubleshooting Guides: 1. Check IC Holder connections.
  2. Replace Left Ink Holder.
  3. Replace Right Ink Holder.

• Code: 1622
• Description: Pressure motor operation Time Out
• Causes: Pressure motor runs longer then expected.
• Troubleshooting Guides: 1. check for obstructions at the rear of the ink holder.
  2. Replace Ink Holder.
  3. Main Board exchange.

• Code: 1623
• Description: Pressure motor runs continously.
• Causes: Pressure motor runs continously.
• Troubleshooting Guides: 1. check for obstructions at the rear of the ink holder.
  2. Replace Ink Holder.
  3. Main Board exchange.

• Code: 1A23
• Description: RTC Error
• Causes: Real Time Clock error
• Troubleshooting Guides: 1. Reset the Date and Time with the service program.
  2. Replace the RTC Battery.
  3. Replace the Main Board

• Code: 1A26
• Description: RTC Error
• Causes: Time and Date error
• Troubleshooting Guides: 1. Replace the RTC Battery.
  2. Reset the Time and Date with the Service Utility.
  3. Replace the main Board.

• Code: 1A37
• Description: PH Thermistor Error
• Causes: PH Temperature detected as out of range.
• Troubleshooting Guides: 1. Check PH FFC Cables.
  2. Replace the Print Head
  3. Replace the PH FFC Cables

• Code: 1A38
• Description: PH Thermistor Error
• Causes: Thermistor Failure
• Troubleshooting Guides: 1. Replace the Print Head

• Code: 1A39
• Description: PH Error
• Causes: FFC Connection, Head BD., Main Board connections
• Troubleshooting Guides: 1. Check PH FFC Cables.
  2. Check Head Board.
  3. Replace the Main Board.
  3. Replace the PH FFC Cables

• Code: 1A41
• Description: PH Rank ID Error
• Causes: Invalid Head Rank written to Main Board.
• Troubleshooting Guides: 1. Rewite the PH ID to the Main Board with the Service Program.

• Code: 1A50
• Description: ASIC communication Error on Main Board
• Causes: Main Board Error
• Troubleshooting Guides: 1. Replace Main Board.

• Code: 1A51
• Description: Main Board communication Error to SUB-B Board Error
• Causes: Main Board Error
• Troubleshooting Guides: 1. Replace Main Board

• Code: 1A54
• Description: USB Flash drive Error
• Causes: USB Flash drive removed during communication
• Troubleshooting Guides: 1. Try another Flash Drive.
  2. Check Connection to USB Flash Drive connection.
  3. Replace Main Board.

• Code: 1A55
• Description: USB Flash drive Error
• Causes: USB Flash drive removed during communication
• Troubleshooting Guides: 1. Try another Flash Drive.
  2. Check Connection to USB Flash Drive connection.
  3. Replace Main Board.

• Code: 1F80
• Description: IES Error (Ink End Sensor)
• Causes: Check IES Sensor on Ink Holder
• Troubleshooting Guides: 1. Try New IC’s
  2. Replace IC Holders L&R
  3. Replace Main Board.

• Code: 1FB8
• Description: IES Error (Ink End Sensor)
• Causes: Check IES Sensor on Ink Holder
• Troubleshooting Guides: 1. Try New IC’s
  2. Replace IC Holders L&R
  3. Replace Main Board

• Code: 1FB9
• Description: CSIC Error
• Causes: Connection or NVRAM Error
• Troubleshooting Guides: 1. Replace Main Board

• Code: 1FBE
• Description: CSIC Error
• Causes: Check IC and connections on Ink Holder
• Troubleshooting Guides: 1. Check Ink Holder FFC connection.
  2. Replace Ink Holder L or R
  3. Replace Main Board.

• Code: 1FBF
• Description: CSIC Error
• Causes: Check IC and connections on Ink Holder
• Troubleshooting Guides: 1. Check Ink Holder FFC connection.
  2. Replace Ink Holder L or R
  3. Replace Main Board.

• Code: 1FC0
• Description: CSIC Error
• Causes: Check IC and connections on Ink Holder
• Troubleshooting Guides: 1. Check Ink Holder FFC connection.
  2. Replace Ink Holder L or R
  3. Replace Main Board.

• Code: 1FC1
• Description: CSIC Error
• Causes: Check IC and connections on Ink Holder
• Troubleshooting Guides: 1. Check Ink Holder FFC connection.
  2. Replace Ink Holder L or R
  3. Replace Main Board.

• Code: 1FC2
• Description: CSIC Error
• Causes: Check IC and connections on Ink Holder
• Troubleshooting Guides: 1. Check Ink Holder FFC connection.
  2. Replace Ink Holder L or R
  3. Replace Main Board.

• Code: 2000
• Description: NVRAM Error
• Causes:
• Troubleshooting Guides: 1. Replace Main Board

• Code: 2002
• Description: SDRAM Error
• Causes:
• Troubleshooting Guides: 1. Replace Main Board

• Code: 2003
• Description: Flash ROM Error
• Causes:
• Troubleshooting Guides: 1. Install Firmware
  2. Replace Main Board

– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here

• Code: 2008
• Description: Wrong Flash Device
• Causes:
• Troubleshooting Guides: 1. Try restarting the printer
  2. Replace Main Board.

• Code: 200A
• Description: F/W Load Error
• Causes:
• Troubleshooting Guides: 1. Re-Install the Firmware
  2. Replace the Main Board

• Code: 200D
• Description: Main Bd. Watch Dog Timer interrupt Error
• Causes:
• Troubleshooting Guides: 1. Replace Main Board

• Code: 200F
• Description: 42V Overload Error
• Causes:
• Troubleshooting Guides: 1. Try to isolate by disconnecting motors etc. attached to the 42V power.
  2. Try restarting the printer
  3 Replace Main Board.
  4. Replace Power Supply

• Code: 3000
• Description: AC Power Error
• Causes: AC Power Shut Off
• Troubleshooting Guides: 1. Turn Power OFF and Back ON
  2. Check AC Power connection
  3. Replace Power Supply
  4. Replace Main Board

– Get more information about Epson XP 15000 troubleshooting, click here
– Shop on my shop, click here

Contact us to get support with Epson SC-F2180 Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.